AZ R3

How much did that cost?

Brettus

iTrader: (2)

All up (including dongle) cost is around $1100US . Slave software all up should run around $450

AZ R3

Thanks - I searched and found your thread, too. Been away too long

bcdjudo7

Don't know if you read back far enough but i recently had the haltech installed on my car . Just wouldn't work if the factory ecu was in the car controlling anything. Is That the case with this unit ? Did it run on series 2 with factory ecu still controlling the dash or was the factory ecu completely removed ? That would be my question as that was our main issue. Completely removing the factory ecu would make you lose power steering as i understand it and I wouldn't want that.

ShellDude

iTrader: (12)

Brettus isn't talking about an ECU. he's talking about a piece of software with an OBD2 dongle that can download your stock map, edit the various tables on that map such as MAF scaling, injector latency, ignition dwell, timing, and fuel maps and then upload that modified map back onto the OEM ECU... in much the same way the Cobb AccessPORT and Hymee Protuner work for S1s.

paimon.soror

iTrader: (15)

We need to find a local to Brettus asap. How close are you to ASH lolol

bcdjudo7

Ahhhh ok .... was under the impression he meant ecu , must've misread

Rotary Inspired

iTrader: (1)

This is what I found on the mazdaedit software.


New mazdaEdit Pro (for professional tuners) is already available for purchase on special offer.
Please, contact to me for details (PM or e-mail).

Personal version will be available later

Currently supported:
1st generation of MPS (MazdaSpeed) cars - 3,6 < 2008MY
1st generation of CX7
1st generation of Mazda 3 NA 1.6, 2.0 (1Mb ECU ROM)
1st generation of Mazda 6 NA 2.0, 2.3 (1Mb ECU ROM)
1st generation of RX8 (512Kb ECU ROM)
MX-5

Brettus

iTrader: (2)

That's different to what I found out by actually asking the guy ......

I have enquired locally about trying the software out on a series 2 RX8 but none of the yards has one ATM.

Adams09rx8

iTrader: (1)

I found a Microtech LT-10 that was used on a 2009 rx8 in fuji apparently.
I dont know if it will still run powersteering like someone was saying but it looks like the most promising thing i have seen for a series 2 FI rx8.

Here is the video of it.

Brettus

iTrader: (2)

Found one .................

yomomspimp06

eta on further details?

Brettus

iTrader: (2)

it's a our local Mazda dealer and thay have agreed to let me hook up to the ecu . Will try get in there this week but have a lot on the go ATM.

ASH8

Don't you just luv it, another one with 'a' Hot Air Intake!!

ErickDR

iTrader: (1)

dont get excited with the backfire...i get a lot of backfire when shifting from 4 to 5 and 5 to 6 with just AEM cai, AP midpipe and custom 3inch stainless steel cat back

blu3dragon

iTrader: (1)

I don't see any mention of the Adaptronic ECU from Turblown in this thread. Anyone tried that?

ECU - Turblown Engineering

paimon.soror

iTrader: (15)

^ nice spammy spam spam ad link

thunderberk

Japanese tuners reflashing series 2 ecus, when a brand like cobb accessport will produce or is it possible for series 2 ??

blu3dragon

iTrader: (1)

If you're referring to my post, and not some other that was deleted I apologize if it came across like that. I searched and did not see any mention of the adaptronics ecu in this thread so figured it was worth posting here in case anyone has tried it. I found a couple of posts related to using it on a Series I and it seemed like there were one or two things to be aware of but that it works.

EDIT: so I found this thread: https://www.rx8club.com/series-ii-fo...-225544/page2/ Looks like it is a possible option but no one has tried it and it is quite cost prohibitive.

blu3dragon

iTrader: (1)

I don't think there is much chance cobb will come out with a solution for s2 given that they decided to drop support for any NA vehicles, including the s1

REtali8

iTrader: (2)

There is actually no hope as far as COBB is concerned. Have talked with them about it in depth when they were doing my dyno. They don't believe there is enough of a market to justify the R&D. In fact their suggestion was to reach out to MazdaManiac.

paimon.soror

iTrader: (15)

I was referring to your post, but I thought you were a spam bot or something. For some reason when I clicked the link after you posted it, it took me to some ad page. The link seems to be ok now.

blu3dragon

iTrader: (1)

Hmm, looks like the forum is redirecting the link. If I edit my most, I see the original link "http://www.turblown.net/store/index.php?categoryID=48", but hover over it and you get a long click through tracking url starting with "http://apicdn.viglink.com/..."

REtali8

iTrader: (2)

Damn siri... sorry, was voice dictating my post and didn't catch the fact it left out the "no" as in "no hope" edited original to fix it.

thunderberk

Australian rotary tuners tune ecu's with microtech lt10s