New MazdaManiac BASE Calibrations
#1527
Administrator
iTrader: (7)
just throw it in reverse, that usually stops ya
#1528
Grasshopper
iTrader: (1)
There was construction a few hundred yards ahead of me and I wouldn't have been able to run off the road then.
Yeah... and possibly create more work for me
Truck already has 206K miles on it so it wouldn't take much.
#1529
Yeay Boosted!
Join Date: Oct 2007
Location: New Hampshire
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Hey, I have a quick question. if you remove silencers out of your exhaust, does that require a retune? or should I be good. I'll leave 'em in if I have to. just curious.
#1531
Administrator
iTrader: (7)
Jeff: did the WEBcast occur this past weekend? Looked for the thread, never saw one.
#1532
Yeay Boosted!
Join Date: Oct 2007
Location: New Hampshire
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Ok, thanks MM. just asked because the turbo is more free flowing, I figured it would do more good than hard to remove them. Hoping it will reduce IAT's.. But I was trying to use common sense. hopefully I'm not wrong
I'll keep an eye on AF's. I had them in Pre-Turbo because the TurboXS pipe was so damn loud. the turbo quiets it down immensely.
So far, for a greddy turbo, it's lasted close to 3k miles with no sign of smoking, so I must be doing somthing right Restrictor in, water/meth kit.
-Thanks a bunch mm.
I'll keep an eye on AF's. I had them in Pre-Turbo because the TurboXS pipe was so damn loud. the turbo quiets it down immensely.
So far, for a greddy turbo, it's lasted close to 3k miles with no sign of smoking, so I must be doing somthing right Restrictor in, water/meth kit.
-Thanks a bunch mm.
#1536
Administrator
iTrader: (7)
***twiddling thumbs***
#1538
Registered User
Join Date: May 2008
Location: Lima Ohio
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
ive been waiting a month now for my map. I sent him an email a while back asking if there was a problem with the logs. I never recieved any reply.
seems a bit long..... i hope its worth the wait.
seems a bit long..... i hope its worth the wait.
#1539
Administrator
iTrader: (7)
tireman: send a PM to Hund
#1542
Yeay Boosted!
Join Date: Oct 2007
Location: New Hampshire
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
#1543
Experienced detonation I'm pretty sure the other day. I was flooring it in first and there was weird sounds near redline, my first reaction was the rev limiter but it was obvious it wasn't. Sounded like the tincan thingy.
It was bloody hot outside, so MUCH higher intake temps than my map was logged at I'm sure, I have been looking at them other days, but not when it's been this hot, it was probably 30C outside compared to probably 10C when I logged. So I have a couple of questions.
1) Should I be worried about the engine after one of these, like could there be damage now even if I let off the gas as the sound came?
2) Should I fill 98 instead of 95 gas in summer to be safe, or go to base map?
It should be noted that I'm driving with my 4.04 map from Jeff and he didn't say finished, I didn't finish mapping because the road I usually used has been closed for roadworks and it's so risky on the highway in spring/summer. And technically my calibration time is expired, I've commited to an ignition kit and such so I can't afford to fork out the new $ to complete it now.
It was bloody hot outside, so MUCH higher intake temps than my map was logged at I'm sure, I have been looking at them other days, but not when it's been this hot, it was probably 30C outside compared to probably 10C when I logged. So I have a couple of questions.
1) Should I be worried about the engine after one of these, like could there be damage now even if I let off the gas as the sound came?
2) Should I fill 98 instead of 95 gas in summer to be safe, or go to base map?
It should be noted that I'm driving with my 4.04 map from Jeff and he didn't say finished, I didn't finish mapping because the road I usually used has been closed for roadworks and it's so risky on the highway in spring/summer. And technically my calibration time is expired, I've commited to an ignition kit and such so I can't afford to fork out the new $ to complete it now.
#1546
Yeay Boosted!
Join Date: Oct 2007
Location: New Hampshire
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Oh, probibly wasn't working on the holiday, His email is automated to look for the subject "accessport calibration service" and send a recieved message. I have a feeling we'll be seeing maps this week.
#1548
Administrator
iTrader: (7)
***runs to check email*** !!!