New MazdaManiac BASE Calibrations
#1576
Original Turbo 'd Auto !!
#1577
WAH WAH WAH
iTrader: (8)
Join Date: Mar 2008
Location: BK/Rockland County
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
I understand the logging calls for 4200 rpms i seemed to have logged at 4800 is that a problem should i redo this? Its hard time judging between what the ap and my gauges said as i know there is a variance between the two.
#1578
WAH WAH WAH
iTrader: (8)
Join Date: Mar 2008
Location: BK/Rockland County
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
In the case of the cruise logs you are correct. You have to maintain 4200 or higher so you'll enter open loop and get cruise values.
I'm sorry, you are correct. I tend to send in everything at once but please defer to the instructions to ensure there isn't any mistakes. At this point yes you will get a rejection email with instructions on how to correct the issue.
For the most part, provided that you answer all the questions and provide all the necessary data you're ok as long as you spell out what you're sending.
One situation I see is people will send in data logs with no explanation of what they are sending. Just make sure everything is explained and you've got everything covered.
I'm sorry, you are correct. I tend to send in everything at once but please defer to the instructions to ensure there isn't any mistakes. At this point yes you will get a rejection email with instructions on how to correct the issue.
For the most part, provided that you answer all the questions and provide all the necessary data you're ok as long as you spell out what you're sending.
One situation I see is people will send in data logs with no explanation of what they are sending. Just make sure everything is explained and you've got everything covered.
#1579
Original Turbo 'd Auto !!
#1583
Got mine on June 5th...just making sure I didn't miss an email. If you could help me out with an estimated completion date, that would be great. Need to plan a long trip.
#1590
ill probly get beefed on for this. but for datalogging at cruise speed. does it have to be 4th gear 4200 rpm or can i do it in 3rd? reason being there is nowhere safe(from law inforcement) around here that i can cruise at roughly 120km/h for extended periods of time. 40km/h over isnt excusable around here by any means so im hoping i can do this in third rather then risk $400 ticket and 3 points.
#1591
His 8
iTrader: (1)
Join Date: Feb 2009
Location: Leander, Tx
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
ill probly get beefed on for this. but for datalogging at cruise speed. does it have to be 4th gear 4200 rpm or can i do it in 3rd? reason being there is nowhere safe(from law inforcement) around here that i can cruise at roughly 120km/h for extended periods of time. 40km/h over isnt excusable around here by any means so im hoping i can do this in third rather then risk $400 ticket and 3 points.
#1595
Did you get 13 before the turbo? My fuel economy pretty much stayed in the 14-17 mpg range with and without turbo. Afterall, you can't do WOT runs for very long before you run into somebody.
#1596
Before the turbo (normal conservative driving) I was getting about 15 and 17 highway also. After the turbo I drove the car harder and got about 14-15 mpg, but my highway mpg actually went to approx 18-19.
I started getting 13 mpg after I uploaded V4_0_1 and do not drive the car hard at all. Boost is limited to 5 lbs and I try my best to keep out of boost altogether. I really hope I'm in the next batch to be completed.
Last edited by ALKEESMOKER; 07-18-2009 at 04:57 AM.