Im currently lowered on S-techs, looking for a flush appearance, no stretch BS or crazy camber.

17x9.75 5-114.3 [+25mm] with (??? unsure on tire size, something meaty)
or
18x8.75 5-114.3 [+33mm] with a 245/40/18?

Fender rolling I am ok with, shaving bumper tabs, stretching fenders etc I dont want to deal with. Prefer the look of a meatier tire, hence the 17" wheel option. Thoughts?

 

Stock suspension;
18 X 8.5 +45
The +45 worries me the most when searching this thread. dash my dreams or make me want them even more.

 

Weak setup and it won't look good IMO, but they should fit without issue.

 

A +32 or +35 would look a lot better with that width

 

Is there an article or thread where I can learn about how to figure out offsets. I would like a dished look and to be as flush as possible without fender rolling etc. I understand the tire sizes, but am not sure about the offsets on the rims. I have no issue reading up about it, but havent really been able to find a good informational anything about it.

 

I wish someone would put something like that into their signature..............

 

lol thanks, I don't usually pay much attention to ppls sigs

 

Bueler?

 

I don't think either will look great with S techs. Decent, but not great.

 

Care to elaborate? Im trying to learn here. Not aggressive enough?

 

im planning on getting 18x9.5 +25 and 19x10 +20 and will be lowered on tein street flex coilovers and will obv have the fenders rolled, will this fit alright ?
and what are the best size tires to run on those size rims

 

or would 18x8.5 +30 be better for the front

 

Looking to get wheels this week. Will this fit stock suspension without rolling?

Enkei RZ-5 in 18x9.5 +42mm

Federal SS595 245/35R18

 

what would you have to do to make these fit on stock suspension

enkei rpf1

18x8.5 +30mm 245/40/18

18x9.5 +15mm 275/40/18

 

I posted on the will it fit thread a few hours ago but still no response. I need a response quickly because someone wants to buy my wheels and they need to know if they'll fit his 8 or not before he leaves.

He's on stock suspension!

they're enkei rpf1's

fronts: 18x8.5 +30mm 245/40/18

rear 18x 9.5 +15mm 275/40/18

I tried searching couldnt find anything

 

Not a ******* chance.

 

How much of a pull with 18x10 +18 on 235/40? On megan racing coilovers

 

I ran a 18x9.5 +22 on mine and it was ok ... I have Powertrix coilovers ... Good chance they will fit but not sure how they would look .. The 9.5 +15 on stock suspension is going to look a little weird lots of poke. Here is a photo of mine on 18x9.5 +22, 225/45 tire, Stock suspension

 

The other 50mm of tire wouldn't be a big deal

Not to mention that picture shows fitment is absolute ****. Great job

 

if i get 19x8.5 +38 in the front with 245/35 or 255/35 & 19x10+20 in the rear with 275/30, will it fit if im on tein street flex coilovers and im guessing im goin to have to roll the fenders right

 

would 18x8.5 +48 and 18x9.5 +38 be a better choice in rim size ? or should i got 18x9.5 all around

 

https://www.rx8club.com/series-i-whe...ls-rx8-232206/

 

so would it be shitty of me to sell my wheel set up to this guy? He really wants to buy them.

 

yes

 

Will this fit 18x9 +30 all around
F 225/40/18
R 245/40/18
And I'm lowerd on Tien