I'm running 245/40's. probably shoulda gone with 35s. Now do you mean just shave it down a little or just shave the whole thing?

 

Ok, thanks :D

 

Just shave it all off

 

I'm looking to run a 19x9 +20 front and 19x10.5 +25 rear. I just got ordered coil overs, and im going to roll and pull the fender. So whats the widest tire I can fit. I am aiming for a 265/30/19 front and 295/30/19 rear is that possible? I seen some run 19x10 +38 with a 285/30/19 on the rear with no modification to the fenders.

 

not a chance. You could maybe run that 265/30/19 in the rear if you dont lower your car that much. I personally wouldn't run wider than a 255/30. There's no point. You have to realize that a x10.5 +25 sticks out 19mm more than a x10 +38.

 

will these fit? lowered on Megan coils, maxed out in the rear.
18x10 +25 all the way around with R 255/35 F 245/40 or 255/35 all the way around?
fenders will need to be rolled and pulled or just rolled?

or will these fit better with less work?
18x9.5 +35 with 265/40 all the way around?

 

Will 18x10 +15 fit? My fenders are rolled but will I have to pull them? I'm lowered in the front and stock springs on the back

 

Excuse me?

 

You're excused.

 

will these fit? lowered on Megan coils, maxed out in the rear.
18x10 +25 all the way around with R 255/35 F 245/40 or 255/35 all the way around?
fenders will need to be rolled and pulled or just rolled?

or will these fit better with less work?
18x9.5 +35 with 265/40 all the way around?

 

The 10 +25 will fit fine since the megans dont go all that low in the rear. A fender roll all the way around will be required in either of your scenarios. And if you're doing the same size wheel all the way around do the same size tire. There is no point of doing staggered if the wheels are the same size. But for the 10's I would run a 245/40 all the way around if you plan to be "slammed"
you'll most likely have to shave your rear tabs too.

 

Perfect! Would it be too much of a hassle to run a wider tire? For instance 255 or even 265 with the 10 + 25 set up?

 

Yeah it would. You could do it but you would have to run a lot more camber, which almost defeats the purpose.

 

I came across this website and fall in love with these rims and i was wondering if it fits on our rx8s and could i get them size 19" x 9.5 et40? is that wide enough? do i have to do some modification? would i need camber kits

here is the website

 

Moved to Will It Fit thread.


They won't fit, wrong bolt pattern. We have 5x114.3

Unless that is a typo on their end, but then I wouldn't buy from a place that can't provide accurate information on the items they sell.

 

Wheel specs would be fine except for the bolt pattern. I know a guy on the forum had miro wheels but not sure if his were special or he had them redrilled for the correct bolt pattern. You can also look at vmr wheels. They make theirs in 5x114.3 sometimes if you ask.

 

ok i found another that"ll fit on here.. legit site?

 

No clue. That wheel should fit though

 

would i need to do some modification or anything? just install it..get and alignment and drop it

 

Your order is out of whack. Drop it before the alignment and it shouldn't need modifications to fit. You haven't said a tire size

 

19X9.5 5X114.3 +40MM 73.1 thats the tire size

 

You need to do a lot more research

 

on what? like rolling out the fender etc?

 

Lol everything. You don't even know what tire sizes look like

 

i believe it is 275/30/19 lol the hell i know