Will It Fit Thread
#2627
You Dumbass!!!
Join Date: Feb 2008
Location: New York
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
I searched through a small portion of this thread... which is more than it sounds. Couldn't find this
Option A. 18 x 10 all around (Preference)
Option B. 17 x 10 all around (with 315\35\17)
+24 Offset
114.3 5 holes (duh)
Option 1. 305\35\18 (Really want, is it doable?)
Option 2. 285\35\18 (Probably doable?)
Option 3. 335\30 (Don't really care, cool to know though)
What combination of A and Numbers will work, and if all fail, will B work?
Option A. 18 x 10 all around (Preference)
Option B. 17 x 10 all around (with 315\35\17)
+24 Offset
114.3 5 holes (duh)
Option 1. 305\35\18 (Really want, is it doable?)
Option 2. 285\35\18 (Probably doable?)
Option 3. 335\30 (Don't really care, cool to know though)
What combination of A and Numbers will work, and if all fail, will B work?
#2629
You Dumbass!!!
Join Date: Feb 2008
Location: New York
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
15 mm = that much trouble?
We talking a roll? Or Roll and some camber? or we talking stretch...
I can do the 1st two myself, 3rd... no.
I can get 18x9.5 in +35 form... would I be able to fit the same tires?
Thanks BTW :-)
We talking a roll? Or Roll and some camber? or we talking stretch...
I can do the 1st two myself, 3rd... no.
I can get 18x9.5 in +35 form... would I be able to fit the same tires?
Thanks BTW :-)
Last edited by Symbioticgenius; 07-06-2009 at 12:04 AM.
#2631
You Dumbass!!!
Join Date: Feb 2008
Location: New York
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
I honestly don't need it. However I am more interested in how much tire I can fit. Everyone does 275, Im pretty sure I can do 285. but why stop so close to the elite group of ppl that can run 300+mm tires.
short version: Just like to be unique
short version: Just like to be unique
#2633
Registered User
Join Date: Oct 2007
Location: long island
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
300 all around will not fit with out rolling the fenders. I have 19x10 rears with a 295 and the tires are to boxed off. I had do roll the rears. If i had a 275 it would fit with out rolling.
#2634
You Dumbass!!!
Join Date: Feb 2008
Location: New York
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
Just to clarify, (I kinda unclearly stated this). I have no problem rolling fenders (have done it before and have access to the tool), nor do I mind a slight (AKA streetable) amount of camber.
Honestly I'd be willing to alter the fenders, but I'm not a body guy so it really depends on the cost. I really just wanted an idea of how much tire I could fit without stretching.
I've gotten a few good answers thus far and I appreciate them all. Thank You.
Honestly I'd be willing to alter the fenders, but I'm not a body guy so it really depends on the cost. I really just wanted an idea of how much tire I could fit without stretching.
I've gotten a few good answers thus far and I appreciate them all. Thank You.
Last edited by Symbioticgenius; 07-06-2009 at 12:44 AM.
#2635
No respecter of malarkey
iTrader: (25)
you won't get a 305+ to fit without a rear fender roll regardless of the wheel offset, there just isn't enough room between the inner and outer fenderwell surfaces, plus the diameters get larger with these sizes too, 295 is about the modless limit with a wide wheel and you'll be limited on how low you can drop it, which is a good thing because most people lower the chassis too much and f up the geometry
Last edited by TeamRX8; 07-06-2009 at 01:11 AM.
#2637
No respecter of malarkey
iTrader: (25)
285/30-18 is around 24.8" OD
295/30-18 is around 25.1" OD
315/30-18 is around 25.5" OD
335/30-18 is around 26" OD
the ODs will all vary several tenths based on the brand/model chosen
#2640
Registered
iTrader: (3)
Join Date: Aug 2004
Location: chicago
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
you won't get a 305+ to fit without a rear fender roll regardless of the wheel offset, there just isn't enough room between the inner and outer fenderwell surfaces, plus the diameters get larger with these sizes too, 295 is about the modless limit with a wide wheel and you'll be limited on how low you can drop it, which is a good thing because most people lower the chassis too much and f up the geometry
#2641
Registered User
Join Date: Dec 2008
Location: CHERRY POINT, NC
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
18x8.5 front
18x9.5 rear
front tires
225/45/18
rear tires
245/40/18
link to the site
http://www.wheelsnext.com/default.cf...nmetal%20Gloss
also, any suggestions would be awesome!!
thanks
18x9.5 rear
front tires
225/45/18
rear tires
245/40/18
link to the site
http://www.wheelsnext.com/default.cf...nmetal%20Gloss
also, any suggestions would be awesome!!
thanks
#2645
Registered User
Join Date: Dec 2008
Location: CHERRY POINT, NC
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
18x8.5 front
18x9.5 rear
with 35 offset
front tires
225/45/18
rear tires
245/40/18
i was also wanting to lower my ride, with the Tien S-Tech Springs, and wondered if this would clear it.
link to the site
http://www.wheelsnext.com/default.cf...nmetal%20Gloss
also, any suggestions on tire sizes would be awesome!!
thanks
#2646
I ♥ Drifting!!!
iTrader: (6)
okay..here goes..
18x8.5 front
18x9.5 rear
with 35 offset
front tires
225/45/18
rear tires
245/40/18
i was also wanting to lower my ride, with the Tien S-Tech Springs, and wondered if this would clear it.
link to the site
http://www.wheelsnext.com/default.cf...nmetal%20Gloss
also, any suggestions on tire sizes would be awesome!!
thanks
18x8.5 front
18x9.5 rear
with 35 offset
front tires
225/45/18
rear tires
245/40/18
i was also wanting to lower my ride, with the Tien S-Tech Springs, and wondered if this would clear it.
link to the site
http://www.wheelsnext.com/default.cf...nmetal%20Gloss
also, any suggestions on tire sizes would be awesome!!
thanks
#2648
Registered
Join Date: Dec 2003
Location: Winnipeg, Manitoba, Canada
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
I looking at a set of 18x9.5 +22 offset ... what would be the biggest tire i could run and is there anyway I could do this setup on Tein s-techs without rolling or camber adjustments? Thanks!