New MazdaManiac BASE Calibrations
04-04-2010, 09:24 PM
#2601
WAH WAH WAH
iTrader: (8)
Join Date: Mar 2008
Location: BK/Rockland County
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
"If your RX-8 has a modified or non-standard MAF housing or if you have modified or non-standard fuel injectors, you MUST submit for a modified base calibration for your particular application before proceeding."
Meaning if you are running a FI rx8 (or trying to get it running) and your injectors are not stock we must submit the 11 deadly questions to ap@mazdamaniac.com so that we can obtain a base map because the FI rx8 maps you have will not work correctly or need to be tailored based on the injectors or maf changes..... Just want to know because i made the submission based on that statement in your instructions to the above email address.
Meaning if you are running a FI rx8 (or trying to get it running) and your injectors are not stock we must submit the 11 deadly questions to ap@mazdamaniac.com so that we can obtain a base map because the FI rx8 maps you have will not work correctly or need to be tailored based on the injectors or maf changes..... Just want to know because i made the submission based on that statement in your instructions to the above email address.
I still dont get what im doing wrong im not logging all im asking for is a based map because of the above mentioned..........
04-04-2010, 09:54 PM
#2602
Hey Jeff, don't mean to be impatient, but just checking to see if i missed anything in my first submission or you are just still backed up on tunes. I got my "received" email for my first set of logs March 10, if everything is ok with my submission and you are still just backed up on tunes, sorry for my impatience. Thanks
-Jeff
-Jeff
.
04-06-2010, 12:04 PM
#2607
WAH WAH WAH
iTrader: (8)
Join Date: Mar 2008
Location: BK/Rockland County
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
^I agree i meant stock wideband sensor like mazda maniac said it only goes to a certain point personally and its definitely helpful to have one that has a more capable range. I had the issue where if i listened to my wideband i would be at 11.17 however in reality im running wayyy to rich at 9.0 in boost. Im still trying to get a base map based off of jeff instructions i think i have done the right thing however still getting no answer besides read carefully which i think i have done and even explained why im requesting a new basemap.
04-07-2010, 02:24 AM
#2608
Eunos Cosmo T61
Join Date: May 2007
Location: Moscow, Russia
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Could i send an additional log from an aftermarket logger like zeitronix etc if it will be helpfull?
Engine has Rx7 rotors and RA apex seals. I want 14 psi of boost
Thank you!
Engine has Rx7 rotors and RA apex seals. I want 14 psi of boost
Thank you!
Last edited by funklove; 04-07-2010 at 02:43 AM.
04-08-2010, 11:22 PM
#2610
Registered User
Join Date: Oct 2009
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Jeff,
I sent you an email on April 1st (need base map for larger injectors) and still have yet to receive a confirmation reply. Like everyone has said in this thread before "not trying to be annoying, just want to make sure I wasn't missed".
Thanks in advance!
I sent you an email on April 1st (need base map for larger injectors) and still have yet to receive a confirmation reply. Like everyone has said in this thread before "not trying to be annoying, just want to make sure I wasn't missed".
Thanks in advance!
04-11-2010, 11:44 AM
#2611
Rotary wanabee
iTrader: (1)
Join Date: Jul 2007
Location: Long Island, NY
Posts: 1,978
Likes: 0
Received 0 Likes
on
0 Posts
MM ... after my last map I would randomly get an engine code ... maf voltage too low
Cobb says 1.2 at idle ... is this too low ? tuning issue? or is my maf busted?
I was going to uninstall the Cobb today to see what the non adjusted reading was ... but i'm lazy so i thought Id ask first.
Cobb says 1.2 at idle ... is this too low ? tuning issue? or is my maf busted?
I was going to uninstall the Cobb today to see what the non adjusted reading was ... but i'm lazy so i thought Id ask first.
04-13-2010, 07:41 PM
#2612
Registered User
Join Date: Jan 2009
Location: laguna hills, CA
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
hey mm. i picked up a blackout kit with the spacer. since you tuned my car at dyno day will i need to get new tunes because of the nitrous? i talked to flashwing at dday and he said no. it just shipped today from a member in NC so i just wanted to know before i install
04-14-2010, 12:02 AM
#2615
hey jeff can i send you an email? your pms are full. its about the problems my car had on the dyno...i posted what id like you to read here in my turbo thread
https://www.rx8club.com/series-i-major-horsepower-upgrades-93/konigs-turbo-thread-163371/page6/
please take a look if you have time, thank you =]]]
https://www.rx8club.com/series-i-major-horsepower-upgrades-93/konigs-turbo-thread-163371/page6/
please take a look if you have time, thank you =]]]
04-14-2010, 08:21 AM
#2616
ROTORHEAD
Join Date: Apr 2008
Location: Cumming, GA
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Hey Jeff, not to bother you but my new AP is hosed as of today. I went to plug it in and it will not power up. I tried the USB cable as well and still nothing. It has worked fine since I got it but won't do a thing now. How do you want me to handle this? Go through you or Cobb for a replacement? My factory program is still on the unit as well.
Ty
Ty
04-14-2010, 12:14 PM
#2617
You can follow the Cobb warranty replacement instructions or you can ship it to me and I'll take care of it (though the latter will add about a week to the turn-around).
Whichever is more convenient for you.
Whichever is more convenient for you.
04-14-2010, 01:40 PM
#2620
Registered User
Join Date: Oct 2009
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Jeff, please advise as to why I can not get any confirmation from you as to the progress of my tune. Like I said, I have not even gotten a confirmation email that you have received my original email asking for the base tune with larger secondary injectors.
04-15-2010, 09:57 AM
#2623
Registered User
Join Date: Oct 2009
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Sent an email with subject line "AccessPort Calibration Service" to ap@mazdamaniac.com on April 1st 2010. It had full answers to the 11 deadly questions and a short explanation as to what I need (base map for 750cc secondary injectors on a greddy turbo kit). I'm looking at the email right now in my sent folder. It was sent from azroto at gmail.
Please check if you have gotten it, or let me know if I need to resend. Does this mean I have to wait ANOTHER 2 weeks?!
04-15-2010, 11:20 AM
#2624
Thank you for finally answering. Yes I followed the directions to the "T".
Sent an email with subject line "AccessPort Calibration Service" to on April 1st 2010. It had full answers to the 11 deadly questions and a short explanation as to what I need (base map for 750cc secondary injectors on a greddy turbo kit). I'm looking at the email right now in my sent folder. It was sent from azroto at gmail.
Please check if you have gotten it, or let me know if I need to resend. Does this mean I have to wait ANOTHER 2 weeks?!
Sent an email with subject line "AccessPort Calibration Service" to on April 1st 2010. It had full answers to the 11 deadly questions and a short explanation as to what I need (base map for 750cc secondary injectors on a greddy turbo kit). I'm looking at the email right now in my sent folder. It was sent from azroto at gmail.
Please check if you have gotten it, or let me know if I need to resend. Does this mean I have to wait ANOTHER 2 weeks?!
I'm in the same boat. I sent my email 3 days latter.
