New MazdaManiac BASE Calibrations
03-02-2010, 07:44 AM
#2526
Is it possible to add a temperature dependent rev limiter? I'm thinking it would be nice to have to avoid running a cold engine to hard(for ex if someone borrows your car).
03-03-2010, 09:50 AM
#2528
Registered
Like chrisis said, there is a stock warm-up rev limit, but I don't know if it's 6000RPM (seems high).
03-03-2010, 11:19 AM
#2529
Rotary wanabee
iTrader: (1)
Join Date: Jul 2007
Location: Long Island, NY
Posts: 1,978
Likes: 0
Received 0 Likes
on
0 Posts
Hey MM .... im putting in the bhr fuel pump this weekend .... can I get an updated map? I'm scared to do it because if the map is too different, I will most likely mess up my engine ...
03-04-2010, 10:14 AM
#2531
Jeff, i'm annoying you as usual:
Malaspina sent the tune out on January 14th and got the "received" reply back but he still didn't get the first map and his folder doesn't exist. Any updates on his map?
Thanks!
G
Malaspina sent the tune out on January 14th and got the "received" reply back but he still didn't get the first map and his folder doesn't exist. Any updates on his map?
Thanks!
G
03-08-2010, 12:48 PM
#2535
He can wait in line like everybody else.
I really don't have time to track down a member here and a member there to confirm where they are in line or what their status or changes are.
I currently have 117 calibrations in the queue and that is after the 90 that went out over the weekend!
I answered your question already about how it works.
When he gets his update, he will get a notification just like everyone else.
I really don't have time to track down a member here and a member there to confirm where they are in line or what their status or changes are.
I currently have 117 calibrations in the queue and that is after the 90 that went out over the weekend!
I answered your question already about how it works.
When he gets his update, he will get a notification just like everyone else.
03-08-2010, 12:55 PM
#2536
Yeah, if he's still in the queue then no problem. He was crushing my ..... because he thought that you forgot about him 
You should hire an Italian to reply to all those punk bitches in their mother tongue, just to make sure that they understand
You should hire an Italian to reply to all those punk bitches in their mother tongue, just to make sure that they understand
03-08-2010, 02:19 PM
#2537
Registered
Join Date: May 2009
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
I was looking at my AFR and it was not changing from 14.7 so i knew something was wrong. Then about 2-3 miles down the road i get a CEL. So i look and it reads
P0131- 02 sensor circuit low voltage(bank 1 sensor 1)
Do i need a new o2 sensor? Can i still drive the car or will it mess it up since the 02 sensor is not working right?
P0131- 02 sensor circuit low voltage(bank 1 sensor 1)
Do i need a new o2 sensor? Can i still drive the car or will it mess it up since the 02 sensor is not working right?
03-18-2010, 09:25 AM
#2539
Registered User
Join Date: Feb 2010
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Did you already have time to ask what's the status of my submission? I'm just worried because the first one was rejected and therefore would be happy to hear that everything is OK; if it's in queue but just needs some time then that's OK for me.
03-19-2010, 02:41 AM
#2540
I'm sure it's answered somewhere else but...
Is it a difference between 95 and 98 octane for the RX8? And would it matter for the mapping? After all 10:1 is not THAT high compression ratio...
Is it a difference between 95 and 98 octane for the RX8? And would it matter for the mapping? After all 10:1 is not THAT high compression ratio...
03-25-2010, 01:49 PM
#2544
Most of the January list went out a long time ago.
Most of the February list went out a few weeks ago.
My plate should be clear by tonight.
Check for an e-mail by tomorrow. If you don't (didn't) receive an e-mail, check for your folder in the first post of the thread and check your SPAM setting on your e-mail client.
Most of the February list went out a few weeks ago.
My plate should be clear by tonight.
Check for an e-mail by tomorrow. If you don't (didn't) receive an e-mail, check for your folder in the first post of the thread and check your SPAM setting on your e-mail client.
03-26-2010, 12:26 AM
#2545
Registered
Join Date: Nov 2009
Location: bayarea, CA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
hi Jeff:
i am sorry. i waited patiently for two months without troubling you. the received date was 1/27/10. my email is saabstoc@aol.com. do you still have a copy of the tuned file that you can send me??
i am sorry. i waited patiently for two months without troubling you. the received date was 1/27/10. my email is saabstoc@aol.com. do you still have a copy of the tuned file that you can send me??
03-26-2010, 02:18 AM
#2546
Registered User
Join Date: Feb 2010
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I'm in a similar situation, I got my received confirmation on 1/19/10. 
I checked my client's spam filter, and already a long time ago, added all mazdamaniac email addresses to the server-side whitelist.
I checked my client's spam filter, and already a long time ago, added all mazdamaniac email addresses to the server-side whitelist.
03-26-2010, 01:49 PM
#2547
WAH WAH WAH
iTrader: (8)
Join Date: Mar 2008
Location: BK/Rockland County
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
"If your RX-8 has a modified or non-standard MAF housing or if you have modified or non-standard fuel injectors, you MUST submit for a modified base calibration for your particular application before proceeding."
Meaning if you are running a FI rx8 (or trying to get it running) and your injectors are not stock we must submit the 11 deadly questions to ap@mazdamaniac.com so that we can obtain a base map because the FI rx8 maps you have will not work correctly or need to be tailored based on the injectors or maf changes..... Just want to know because i made the submission based on that statement in your instructions to the above email address.
Meaning if you are running a FI rx8 (or trying to get it running) and your injectors are not stock we must submit the 11 deadly questions to ap@mazdamaniac.com so that we can obtain a base map because the FI rx8 maps you have will not work correctly or need to be tailored based on the injectors or maf changes..... Just want to know because i made the submission based on that statement in your instructions to the above email address.
03-26-2010, 01:56 PM
#2548
Most of the January list went out a long time ago.
Most of the February list went out a few weeks ago.
My plate should be clear by tonight.
Check for an e-mail by tomorrow. If you don't (didn't) receive an e-mail, check for your folder in the first post of the thread and check your SPAM setting on your e-mail client.
Most of the February list went out a few weeks ago.
My plate should be clear by tonight.
Check for an e-mail by tomorrow. If you don't (didn't) receive an e-mail, check for your folder in the first post of the thread and check your SPAM setting on your e-mail client.
