Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Towing Points?

Thread Tools
 
Rate Thread
 
Old Nov 5, 2012 | 11:50 AM
  #1  
Gopherage's Avatar
Thread Starter
Gophericer...?
 
Joined: May 2007
Posts: 353
Likes: 0
From: Brinkhaven, or Hudson
Towing Points?

Hello my rx8 is cuurently stuck in my parents yard because I hid it around the back of their house to avoid halloween vandals and it sunk a few inches into the ground. I know that the car came with tow hooks however I was rearended several years ago and this apparently crushed the threads in the holes for the toww hooks. So I'm looking for ideas of where I could tie a toe strap to pull my car out with. I have a full size truck with a v8 so.power wont be a problem. Would one of the control arms for the suspension be alright? I'm looking for ideas as to where others may have towed from. Or if you have any ideas how I could rethread my tow point?
Reply
Old Nov 5, 2012 | 12:06 PM
  #2  
paimon.soror's Avatar
Registered
iTrader: (15)
 
Joined: Jun 2010
Posts: 7,560
Likes: 27
From: Between Cones
Originally Posted by gopherage
would one of the control arms for the suspension be alright?

no.
Reply
Old Nov 5, 2012 | 12:18 PM
  #3  
HiFlite999's Avatar
Registered
iTrader: (2)
 
Joined: Jun 2009
Posts: 2,257
Likes: 5
From: MI
^ What he said. Can't fix stupid with stupid.

a) Get an long eyelet at Home Depot that's small enough in diameter to pass entirely through the bumper frame without engaging the threads. Put nut + washer on it. Pull. Maybe car will move before eyelet breaks, but probably not.

b) Get lots of boards and a jack. Support jack with board. Jack up corner of car. Put board under tire. Repeat 4x. Wait for ground to freeze. Drive away.
Reply
Old Nov 5, 2012 | 06:00 PM
  #4  
godesshunter's Avatar
Voids warranties
 
Joined: Aug 2011
Posts: 1,632
Likes: 0
From: southern new england
Originally Posted by HiFlite999
a) Get an long eyelet at Home Depot that's small enough in diameter to pass entirely through the bumper frame without engaging the threads. Put nut + washer on it. Pull. Maybe car will move before eyelet breaks, but probably not.
Thats a good idea. You can get one that is welded closed to keep it from stretching open. Use a strap and not a chain. It should do the job.

Or how about towing it from the front?
Reply
Old Nov 5, 2012 | 06:19 PM
  #5  
dannobre's Avatar
Modulated Moderator
iTrader: (3)
 
Joined: Feb 2004
Posts: 13,720
Likes: 344
From: Smallville
Just hook it around the diff or something...doesn't take that much if you pull it slowly

Use a strap....and don't jerk it and it won't hurt anything
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cliffkemp
Series I Trouble Shooting
8
Dec 24, 2024 10:48 AM
Hunterkelley24
Series I Engine Tuning Forum
14
Jun 14, 2022 08:32 AM
projectr13b
RX-8 Racing
20
May 14, 2016 06:25 PM
Jazzmeson
RX-8 Multimedia/Photo Gallery
11
Mar 2, 2016 02:25 PM
projectr13b
Series I Do It Yourself Forum
1
Sep 6, 2015 01:04 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 03:49 PM.