Notices
Series I Major Horsepower Upgrades This is the place to discuss Super Chargers and Turbos, Nitrous, Porting, etc

Pettit Super Charger Owners

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 04-03-2011, 09:16 PM
  #8701  
Registered
 
Moon Assad's Avatar
 
Join Date: Jan 2006
Location: Maryland
Posts: 1,257
Likes: 0
Received 0 Likes on 0 Posts
Any idea what the codes are? Sounds like security problems.
I'm waiting on connectors for the box wiring. Also have a wideband and boost gauge on the way. I got the IC up and running, wounder what boost if any I'm pushing with the bypass open. I hear a pretty good wine, seems to like the factory tune at this pressure, no pinging, no codes. The zip this beast has setup like this is pretty crazy. Id say like the yellow 8 with the first smaller blower. Now, how to plumb in the solniod for boost control. Ow, I left the front snorkle in, not sure if it benifits the flow or hinders it. Seems from looking it over it won't effect the flow when locked open. Might help with cooler air intake.
Old 04-04-2011, 08:39 AM
  #8702  
Registered
iTrader: (3)
 
olddragger's Avatar
 
Join Date: Apr 2004
Location: macon, georgia
Posts: 10,828
Likes: 0
Received 38 Likes on 27 Posts
Wow--on oem tune??
You are not at WOT any--right?
SSV still locked open?
If it can be installed on oem tune and driven enough to get it to a dyno--that would be a great marketing +
Moon--what do you think about the Goopy apex seals in the RX7 rotors?

By the way fixed the R3---as a last ditch effort before towing it to the stealership I just started replacing fuses---one at a time. None appeared blown. I got down to the inside fusebox and replaced the "meter" 10amp fuse and "BLAM" everything worked. Perfect. No problems what so ever. I did the "happy, happy, joy dance!"
That fuse holding it up to the sunlight was not "blown" to the naked eye. I took a magnifying gass and then I saw it. Right at the corner where the little strip starts going up---it was cracked. Not displaced--nothing. Just a crack. It was through and through so no current would pass.
I have NEVER seen that before. I have to work on my Karma.
But learning experience--if you ever have those symptoms--check that fuse.
Old 04-04-2011, 10:01 PM
  #8703  
Registered
 
Moon Assad's Avatar
 
Join Date: Jan 2006
Location: Maryland
Posts: 1,257
Likes: 0
Received 0 Likes on 0 Posts
Any thoughts about why the 09 engine has 2 knock sensors? I have an idea but id like to hear other opinions before I come to conclusions.
Old 04-05-2011, 10:20 AM
  #8704  
Registered
 
Moon Assad's Avatar
 
Join Date: Jan 2006
Location: Maryland
Posts: 1,257
Likes: 0
Received 0 Likes on 0 Posts
I forgot to mention I revamped the oil fill setup a little. I put a fitting on the aluminum fill housing and have direct vac going to it. Its not sucking any oil like the original T setup would even under total vac. No need for a vent any more. I'm just going to vent the blower alone.
Old 04-07-2011, 08:35 AM
  #8705  
Registered
iTrader: (3)
 
olddragger's Avatar
 
Join Date: Apr 2004
Location: macon, georgia
Posts: 10,828
Likes: 0
Received 38 Likes on 27 Posts
watch when you add oil--sometimes it does back up and can cover the vacuum fitting.
I wish we could modify that housing that is bolted onto the engine--that 90 degree turn the oil has to make sure slows down the fill time.
I may look at this when my engine gets out?

Double knock sensors---Mazda warrey of bad gas?
Whats your toughts?
I V mounted my secondary radiator up agaisnt the bottom of the a/c condensor.
man it sure is hard to get air to flow through the a/c condensor and the radiator. I am actually wondering if it would be a good thing to separate the two?
Moon what is the timing maps like for the 09?
Old 04-07-2011, 09:01 AM
  #8706  
Registered
 
Moon Assad's Avatar
 
Join Date: Jan 2006
Location: Maryland
Posts: 1,257
Likes: 0
Received 0 Likes on 0 Posts
I think it might be for fuel. Wouldn't it be nice if they used it to help tune in timing maps? Might be a sure way to get rid of the big D. I'm thinking of redoing the oil fill, might do it in 1 inch or just start from scratch with a bunch of steel and a bender. It does need work. I just changed the oil yesterday and I hate that slow fill ****.
Old 04-07-2011, 09:06 AM
  #8707  
Registered
iTrader: (3)
 
olddragger's Avatar
 
Join Date: Apr 2004
Location: macon, georgia
Posts: 10,828
Likes: 0
Received 38 Likes on 27 Posts
sure would--- but it cant adjust timing for each rotor? Wouldnt one GOOD knock sensor be able to do the same thing?
Old 04-07-2011, 11:03 AM
  #8708  
JCR
Registered User
 
JCR's Avatar
 
Join Date: Apr 2011
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
Hi guys, i am new to this forum and don't know if i can ask that here, i searched for that topic and i found this only one talking about pettit.

I know its a noob question.
So i was wondering if its really pushing what they claim.
http://www.rx7store.net/Pettit_Racin...ecal%20kit.htm

+60–80 HP
+50-70 lb-ft

I mean is it real ? Only seems to be a piece of intake.
Old 04-07-2011, 11:05 AM
  #8709  
JCR
Registered User
 
JCR's Avatar
 
Join Date: Apr 2011
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
Kinda look like this crap on ebay...
http://cgi.ebay.ca/Universal-Turbo-A...item43a63accb5
Old 04-07-2011, 11:06 AM
  #8710  
Pew Pew Pew
iTrader: (10)
 
J8635621's Avatar
 
Join Date: Jun 2007
Location: Waco
Posts: 6,344
Received 128 Likes on 89 Posts
and a tune. It's for cars that have their supercharger setup.
Old 04-07-2011, 11:09 AM
  #8711  
JCR
Registered User
 
JCR's Avatar
 
Join Date: Apr 2011
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
I see so have to buy the s/c then the little kit for 1k$.

So if i want to go supercharge, it is gonna cost me around 7k$.
Ridiculous lol, i will go have a look at the cheap perfo boost post.

Thanks J8635621.

Nice to see fast answer like that at this hour on a forum.
Old 04-07-2011, 02:42 PM
  #8712  
Registered
 
Moon Assad's Avatar
 
Join Date: Jan 2006
Location: Maryland
Posts: 1,257
Likes: 0
Received 0 Likes on 0 Posts
I can't remember wich wire you tap on the maf sensor for the W/M. Anyone know?
Old 04-07-2011, 03:32 PM
  #8713  
The Chief
iTrader: (7)
 
jskup1's Avatar
 
Join Date: Jun 2005
Location: Virginia Beach, VA
Posts: 827
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by JCR
Ridiculous lol, i will go have a look at the cheap perfo boost post.
Nice to see fast answer like that at this hour on a forum.
Bye, bye.
Old 04-07-2011, 03:36 PM
  #8714  
Pew Pew Pew
iTrader: (10)
 
J8635621's Avatar
 
Join Date: Jun 2007
Location: Waco
Posts: 6,344
Received 128 Likes on 89 Posts
He is gonna blow a motor with his cheap ways.
Old 04-08-2011, 02:29 PM
  #8715  
Registered User
iTrader: (1)
 
marsredr100's Avatar
 
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes on 0 Posts
Wax On, Wax Off...Ready for a couple of car shows before Road Racing on the 30th
Attached Thumbnails Pettit Super Charger Owners-100_1638.jpg  
Old 04-08-2011, 06:50 PM
  #8716  
Registered
iTrader: (3)
 
olddragger's Avatar
 
Join Date: Apr 2004
Location: macon, georgia
Posts: 10,828
Likes: 0
Received 38 Likes on 27 Posts
Moon its the signal wire
I may look later and see where mine is----BUT run the meth from boost and not maf--works better that way?

Juan---real purty---whatch out for birds.
Did you get my Email? I cant open the attachment you sent.
R3 is now licensed--any one want an R3 with less than 10K miles for $14000? Perfect car!
Juan how is the engine?
Mine should get to Cam next week and the build will start soon after that--stay tuned
Oh by the way I, V mounted my secondary radiator--sweet.
OD
Old 04-08-2011, 07:01 PM
  #8717  
The Chief
iTrader: (7)
 
jskup1's Avatar
 
Join Date: Jun 2005
Location: Virginia Beach, VA
Posts: 827
Likes: 0
Received 0 Likes on 0 Posts
Looks great Juan!
Old 04-09-2011, 12:25 PM
  #8718  
I don't remember
 
Galen Darkmoon's Avatar
 
Join Date: Jan 2007
Posts: 538
Likes: 0
Received 0 Likes on 0 Posts
OD, I thought you were using the MAF controller? Not happy with it? Have you already put a MAP controller in and why.
Old 04-09-2011, 12:53 PM
  #8719  
Registered
iTrader: (3)
 
olddragger's Avatar
 
Join Date: Apr 2004
Location: macon, georgia
Posts: 10,828
Likes: 0
Received 38 Likes on 27 Posts
Because Juan is the Pettit God and he does his that way.
The snow controller can do either maf or map. Just flick the switch.
I found mine was coming on during no boost at times because it was tricky to get the maf reading right
OD
Old 04-11-2011, 04:20 AM
  #8720  
I don't remember
 
Galen Darkmoon's Avatar
 
Join Date: Jan 2007
Posts: 538
Likes: 0
Received 0 Likes on 0 Posts
I can see how coming out of a corner with your foot in it and not pulling boost yet but starting the spray. THX
Old 04-11-2011, 07:11 AM
  #8721  
Registered User
iTrader: (1)
 
marsredr100's Avatar
 
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by olddragger
Because Juan is the Pettit God and he does his that way. OD
Are you kidding me? No even close. I just know how to turn the key and pump gas.
Old 04-11-2011, 07:18 AM
  #8722  
Registered User
iTrader: (1)
 
marsredr100's Avatar
 
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by jskup1
Looks great Juan!
Thanks!
Attached Thumbnails Pettit Super Charger Owners-100_1681.jpg   Pettit Super Charger Owners-100_1685.jpg  
Old 04-11-2011, 08:20 AM
  #8723  
Registered
iTrader: (3)
 
olddragger's Avatar
 
Join Date: Apr 2004
Location: macon, georgia
Posts: 10,828
Likes: 0
Received 38 Likes on 27 Posts
congrats dude. wrench time pays off.
I may have to do a car show if I can get all the track rubber off the car.
JK.
OD
Old 04-12-2011, 07:59 PM
  #8724  
Registered
iTrader: (3)
 
olddragger's Avatar
 
Join Date: Apr 2004
Location: macon, georgia
Posts: 10,828
Likes: 0
Received 38 Likes on 27 Posts
ok guys--engine will be at Cam's tomorrow! He will tear it down and then give me a call and we will proceed--guess I will be the second low compression build?
I am hoping that i can tune the ssv to open at 2K and stay open--i dont like that thing.
OD
Old 04-13-2011, 02:49 AM
  #8725  
Londons Yellow Peril
 
california style's Avatar
 
Join Date: Apr 2005
Location: North London
Posts: 1,340
Likes: 0
Received 1 Like on 1 Post
Woot, go Juan! Trophies!


You have already rated this thread Rating: Thread Rating: 1 votes, 5.00 average.

Quick Reply: Pettit Super Charger Owners



All times are GMT -5. The time now is 11:43 PM.