Another Top Mount Setup
Always Learning
Joined: Feb 2011
Posts: 17
Likes: 0
From: NJ
We are.....
https://www.rx8club.com/vendor_directory.php
I've taken the price off our site in attempt to have more Rx8 owners talk to us so we can explain in detail how we strive to build the best turbo kits on the market. In addition to this we like to show how well we respond to emails/phone calls, and how much we value customer service.
https://www.rx8club.com/vendor_directory.php
I've taken the price off our site in attempt to have more Rx8 owners talk to us so we can explain in detail how we strive to build the best turbo kits on the market. In addition to this we like to show how well we respond to emails/phone calls, and how much we value customer service.
Pappa Jedi will give you a shoulder to cry on.
no homo!
'expensive' is relative.
I think people are far too sensitive to price these days and sometimes do not take time to consider the value of what they're buying. This method enables Turblown to have a conversation with their potential customers about the benefits of their system and what the cost can be given what options / extras the customer chooses.
no homo!
I think people are far too sensitive to price these days and sometimes do not take time to consider the value of what they're buying. This method enables Turblown to have a conversation with their potential customers about the benefits of their system and what the cost can be given what options / extras the customer chooses.
Registered
Joined: Jun 2006
Posts: 855
Likes: 0
From: Laveen,Az
it wouldnt be that, there are alot of people who have interest in getting there car turboed but one of the things that you have to factor is that you have many options to choose from that can change the price like what turbo your running and what fuel system u need to get the horsepower u need. so you wouldnt be close at all. But to me every thing is very expensive for a rotary car.
Last edited by sauceyI986; Feb 16, 2011 at 02:06 PM.
Original Turbo 'd Auto !!
Joined: Mar 2004
Posts: 2,136
Likes: 5
From: Surprise, Arizona
Or i wouldn't have my settup the way it sits now.
Always Learning
Joined: Feb 2011
Posts: 17
Likes: 0
From: NJ
Actually I just checked out their website and the depth available for these kits is very impressive. No wonder they don't list prices, they couldn't possibly account for the needs of each individual.
Thanks for the ballpark. Totally affordable.
Thanks for the ballpark. Totally affordable.
http://www.rx7store.net/Turblown_RX_...rx-8%20kit.htm
only thing worse than a spelling fail is a chassis dyno fail
http://www.bing.com/videos/watch/vid...luiu5i?rel=msn
srsly, whoever strapped that down should be beat with a red-hot rotary midpipe
http://www.bing.com/videos/watch/vid...luiu5i?rel=msn
srsly, whoever strapped that down should be beat with a red-hot rotary midpipe
Last edited by 9krpmrx8; Feb 17, 2011 at 05:14 PM.
Thread Starter
Boostin'
Joined: Feb 2006
Posts: 641
Likes: 1
From: Twin Cities, MN
Its blown, I thought that was obvious. 27psi is a lot to handle. Especially since the maf can't read that high and it doesn't have the injector for it. We are discussing the options of either A) a built engine, swap in a stock used one, or what he really wants a 20b.
Registered
Joined: Jul 2008
Posts: 324
Likes: 0
My statement was kinda sarcastic. I had a feeling those seals had gone. I wonder what wouldve happened with Esmeril seals in that situation? Thats a real catastrophic disaster to put any seal through. But good luck on the future and kudos for the courage to take risk to better the rx8 community
No seals are going to live through the leaness that you would have seen at 27psi, would have made a nastly boom and then died 
....even high octane race gas wouldn't have helped....damn....that sucks
....even high octane race gas wouldn't have helped....damn....that sucks
Thread Starter
Boostin'
Joined: Feb 2006
Posts: 641
Likes: 1
From: Twin Cities, MN
I can tell you guys this, we just finished a 500rwhp FD, and for that microsec of 27psi it pulled just as hard. Jamaal isn't giving up and nor are we. One blown engine isn't scaring anyone.
http://www.youtube.com/watch?v=hHhyIK_uCtc
http://www.youtube.com/watch?v=hHhyIK_uCtc