Another Top Mount Setup
4 Attachment(s)
Manifold is setup for a T3 1.06 GT35R, Wastegate is an open dumped Tial 44MVR, downpipe is 3" SS.
|
Was this made for a shop or is it a one-off piece for an individual?
|
What happens when you have to get a new belt and then the bracket doesnt work because the belt adjustment is different?
|
Originally Posted by Spoolin8
(Post 3622800)
What happens when you have to get a new belt and then the bracket doesnt work because the belt adjustment is different?
|
Your welding is getting better and better and better. So is the support bracket part of the final setup or just temporary support>.
|
whoa.
|
swet looking setup - are we going to get a dyno of this one ?
|
wow another sick top mount.
|
Originally Posted by Brettus
(Post 3623394)
swet looking setup - are we going to get a dyno of this one ?
We also might be having a 8 being shipped in for a complete installation including dyno tuning too. Its only a matter of time, we have just had a swamped with work for the past 6 months or so.. |
that DOES look awesome... i bet its going to flow like crazy ;)
|
i need one for my 8!!!!! manifold is a good place to start for my future turbo
|
4 Attachment(s)
Some spy shots of the install... :wink2:
|
Nice heat sheilding there
|
It is nice, and a nice penny too! I love to see the different changes on each setup.
|
3 Attachment(s)
Realize this is a bit backwards from how its typically done, but "This is what i've done" is better than "this is what I plan on doing."
Thanks Elliot and people @ Turblown Engineering, always answered my rediculous questions at all hours of the night/day. Jeff @ mazdamaniac...I initially thought you were an ass...but you are damn good. Thanks for the tune and providing the accessport. Go big or go home. |
5 Attachment(s)
More pics...
|
What are you using for an EMS?
|
looks good AND making nice powah.
|
Originally Posted by dannobre
(Post 3830298)
What are you using for an EMS?
|
I should also note (before Elliot hurts me) that this was achieved at about 60% throttle, with a shot fuel regulator...clearly expecting better results at full throttle with a fully functioning regulator.
|
Originally Posted by Jamaalsmith
(Post 3830245)
Jeff @ mazdamaniac...I initially thought you were an ass..
Next time, provide a forwarding address. |
Nice setup, looks well done.
|
So Jamaal, are you going to post up the Dyno in the Highest TC/SC Dyno thread?
Here: https://www.rx8club.com/series-i-major-horsepower-upgrades-93/highest-horsepower-dynos-sc-turbo-nitrous-post-them-here-180037/ |
Your MAF is going to hate you :)
|
Originally Posted by dannobre
(Post 3830442)
Your MAF is going to hate you :)
|
All times are GMT -5. The time now is 11:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands