Mazdaedit
#529
Registered
Hi Brett
Yes I do have one, as I bought one some years ago for a Sony stereo unit I have.
I'm happy to bring it down with me if you like, but I'm not sure when that will be.
If you would like it soon, then I can mail it down to you if you like.
Just let me what suits you.
Rotaman
Yes I do have one, as I bought one some years ago for a Sony stereo unit I have.
I'm happy to bring it down with me if you like, but I'm not sure when that will be.
If you would like it soon, then I can mail it down to you if you like.
Just let me what suits you.
Rotaman
#530
Hi Brett
Yes I do have one, as I bought one some years ago for a Sony stereo unit I have.
I'm happy to bring it down with me if you like, but I'm not sure when that will be.
If you would like it soon, then I can mail it down to you if you like.
Just let me what suits you.
Rotaman
Yes I do have one, as I bought one some years ago for a Sony stereo unit I have.
I'm happy to bring it down with me if you like, but I'm not sure when that will be.
If you would like it soon, then I can mail it down to you if you like.
Just let me what suits you.
Rotaman
The one i have is a 'Keyspan' . It yours is the same probably no point sending it.....
Last edited by Brettus; 09-15-2013 at 08:46 PM.
#531
Registered
I had a look at the keyspan product and it looks very similar to the one I have, but mine is a different brand, so you probably right, if yours didn't work, then mine probably won't make much difference.
Never mind.
Never mind.
#535
Driving my unreliable rx8
What's your thought on that brettus? Does Epifan upgrade the descriptions as people find them?
#538
Registered
iTrader: (15)
Correct you cannot. Btw I found something the other day, just want to document it here. When you first fire up MazdaEdit's logger, you will notice that you have a subset of loggable pids. If you want to see ALL PIDs, you need to uncheck an option. I.e. I needed to log both MAFv and MAF Rate, and couldn't find MAF Rate until I did this.
#540
Yes it does. You only have to copy data log config file with name logcfg.txt to SD root directory.
I attached you my locfg.txt that works really good.
This config file will generate one log file each time you start/stop the car, and you can open it on Mazda Edit -> File -> Open Log File option.
#541
Yes it does. You only have to copy data log config file with name logcfg.txt to SD root directory.
I attached you my locfg.txt that works really good.
This config file will generate one log file each time you start/stop the car, and you can open it on Mazda Edit -> File -> Open Log File option.
I attached you my locfg.txt that works really good.
This config file will generate one log file each time you start/stop the car, and you can open it on Mazda Edit -> File -> Open Log File option.
Also, any idea how to record MAF voltage rather than calculated g/s? That would actually be more convenient for tuning if we can figure it out.
#542
Has anyone tried logging mode 22 pids with the openport?
Maybe try putting this entry in logcfg.txt:
I'm guessing a bit on the scaling.
Attached is an excel sheet with a list of them that may be correct in places.
Maybe try putting this entry in logcfg.txt:
Code:
paramname=MAF_Volts mode=0x22 paramid=0x1177 databits=16 scalingrpn=x,0.01,*
Attached is an excel sheet with a list of them that may be correct in places.
#545
Has anyone tried logging mode 22 pids with the openport?
Maybe try putting this entry in logcfg.txt:
I'm guessing a bit on the scaling.
Attached is an excel sheet with a list of them that may be correct in places.
Maybe try putting this entry in logcfg.txt:
Code:
paramname=MAF_Volts mode=0x22 paramid=0x1177 databits=16 scalingrpn=x,0.01,*
Attached is an excel sheet with a list of them that may be correct in places.
Last edited by Brettus; 10-19-2013 at 05:00 PM.
#546
Correct you cannot. Btw I found something the other day, just want to document it here. When you first fire up MazdaEdit's logger, you will notice that you have a subset of loggable pids. If you want to see ALL PIDs, you need to uncheck an option. I.e. I needed to log both MAFv and MAF Rate, and couldn't find MAF Rate until I did this.