Mazdaedit
Just bought this and working my way through getting it sorted to tune my turbo 8 .
Anyone else tried it ? |
Never heard of it, but sounds interesting. So this + the Tactrix port replaces the Cobb?
|
Yes - have yet to do my first reflash . Need to buy myself a laptop as that needs to be connected to the OBD port via Tactrix 2.0 to do the flash.
|
it was brought up on the forum starting back around 2010, never seen much on it until lately
guess you can start filling us all in on the details |
According to the website, they don't have a personal (one vin) version of the software for the RX8, only the pro version. Has that changed?
|
/\ not as far as I know . I have the Pro version .
|
1 Attachment(s)
|
^ Interesting curves.
I wonder if the program gives access to more PCM tables than the Cobb. |
/\ there is access to all the tables - I had to find a lot of them myself .
|
I would have a bit of trouble tuning if that was my computer layout...lol
More info, please. Looks like you have the usual tables defined, find any useful tables you haven't played with yet? |
Originally Posted by NgoRX8
(Post 4368110)
I would have a bit of trouble tuning if that was my computer layout...lol
More info, please. Looks like you have the usual tables defined, find any useful tables you haven't played with yet? |
subscribing to potential epic tuning thread
your my test dummy lol |
So its all just address based ... you plug in an offset and length / possibly dimensions, Brett?
|
Brett. Per your note on the S2 thread, would it benefit you in any way for me to get the Tactrix dongle to send you data? Or will remote support not be feasible at this time.
|
I'd be interested to see how this evolves for S2 support as well.
|
Good stuff. Never heard of it.
|
Looks like the Pro version and the necessary dongle run about $1100 total... not bad at all if it delivers.
|
Originally Posted by ShellDude
(Post 4368370)
Looks like the Pro version and the necessary dongle run about $1100 total... not bad at all if it delivers.
|
Originally Posted by reddozen
(Post 4368437)
ouch... you can get a standalone for cheaper than that...
For an RX-8? Where? |
^ not sure about that
|
Originally Posted by reddozen
(Post 4368437)
ouch... you can get a standalone for cheaper than that...
|
Originally Posted by paimon.soror
(Post 4368199)
Brett. Per your note on the S2 thread, would it benefit you in any way for me to get the Tactrix dongle to send you data? Or will remote support not be feasible at this time.
As far as providing support - I need to get my own car tuned before I can think about that . Luckily will be fitting a new engine soon so can experiment with my old one without fear :) |
Haltech – Engine Management Systems » Platinum Sprint RE
Haltech Platinum Sprint RE ECU right off their website Just ECU: $899 With the long lead kit: $1,042 |
well hurry up then jeeeeeez
|
Originally Posted by ShellDude
(Post 4368190)
So its all just address based ... you plug in an offset and length / possibly dimensions, Brett?
|
All times are GMT -5. The time now is 03:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands