Racing Beat REVi Intake System
#401
Registered
Originally Posted by GrRx8MaZdA
The catback can't make more than 4hp...For sure..But the combo of intake and catback can make more than just catback or just intake...
#402
Registered
Join Date: Sep 2003
Location: Marietta,Ga
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Dyno with only the cat back
The cat back exhaust made a whopping 2.5 hp and negligible torque gain. I tlooks and sounds good but did not do much else. When i get back from Road Atl, I'll see if I can find the old sheet but can't promise I still have it saved. Someone else asked about correction factors from the first baseline and todays run. I do have that info and will post it for all of those who find it important or doubt the honesty. I really have nothing to gain by blowing smoke, I am however very proud of the power the car is making and am glad to share the experience. I am off to see the new 3 rotor LMP2 Courage go fast. Good night all.
Charlie
Charlie
#404
Bummed, but bring on OU!
Originally Posted by Marietta 8
The cat back exhaust made a whopping 2.5 hp and negligible torque gain. I tlooks and sounds good but did not do much else.
#406
Installed mine today. A big improvement over the K & N Typhoone that I'd fabricated a cover for to cut the noise.
I don't know if it's making more power or not, but it seemed to spin up a bit quicker at high rpms (8k+).
It looks cool and sounds cool too...my big hope is for a little boost in gas mileage.
I don't know if it's making more power or not, but it seemed to spin up a bit quicker at high rpms (8k+).
It looks cool and sounds cool too...my big hope is for a little boost in gas mileage.
#407
Getting mine today April 15th.. This day shall be remembered as "REVi day"
Waiting for the brown UPS truck to come, i'm like a kid sitting down near the
window waiting... youppi!!!
SB.
Waiting for the brown UPS truck to come, i'm like a kid sitting down near the
window waiting... youppi!!!
SB.
#410
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Hey Nemesis..Have u decides which header yet???There are 5-6 on the market...I have greddy sp2 with midp-4 from canzoomer(coming until 1st may)and waiting fro revi...next good mod for me if it will free more whp would be header..But don't know which and don't know if they work cause the header of the 8 is already a difficult peace
Little off topic but i would like to know...
Little off topic but i would like to know...
#411
I'll bet Nemesis has grown weary of waiting for both my aluminum PPF and header so he'll seek those out elsewhere.
The PPF is getting some additional gusseting done and the final fit is coming up. We wanted to do some stress testing but decided we better strengthen up some stuff on it, first. So far, the PPF is able to be installed with one hand lifting into position and the other installing the nuts. And that is with the 3" exhaust still bolted on.
The header comes next. Fanman was nice enough to loan me his factory piece and even paid for the shipping without question. We have some great members on this forum.
Sorry about the minor topical diversion.
CRH
The PPF is getting some additional gusseting done and the final fit is coming up. We wanted to do some stress testing but decided we better strengthen up some stuff on it, first. So far, the PPF is able to be installed with one hand lifting into position and the other installing the nuts. And that is with the 3" exhaust still bolted on.
The header comes next. Fanman was nice enough to loan me his factory piece and even paid for the shipping without question. We have some great members on this forum.
Sorry about the minor topical diversion.
CRH
#412
Bigus Rotus
iTrader: (3)
Originally Posted by GrRx8MaZdA
Hey Nemesis..Have u decides which header yet???There are 5-6 on the market...I have greddy sp2 with midp-4 from canzoomer(coming until 1st may)and waiting fro revi...next good mod for me if it will free more whp would be header..But don't know which and don't know if they work cause the header of the 8 is already a difficult peace
Little off topic but i would like to know...
Little off topic but i would like to know...
Back on topic - the Racing Beat Intake is going to improve MPG if you can keep your foot out of it. Last night just crusing around town, I hardly have to push the gas pedal at all to move the car. It's breathing allot better. Has anyone thought about a home made ram duct while we wait for RB to finish theirs?
#413
Bigus Rotus
iTrader: (3)
Originally Posted by Charles R. Hill
I'll bet Nemesis has grown weary of waiting for both my aluminum PPF and header so he'll seek those out elsewhere.
Originally Posted by Charles R. Hill
Fanman was nice enough to loan me his factory piece and even paid for the shipping without question. We have some great members on this forum.
#414
Are you saying that some people are adept at keeping the caravan together and others are a little more "competitive", shall we say?
BTW, to my knowledge, I am the only one stupid enough to slap a light PPF on his car and run the risk of drivetrain damage even if SR was falsely credited by the idiots at Sport Compact Car mag a couple months ago. I wrote SCC an e-mail on that.
CRH
BTW, to my knowledge, I am the only one stupid enough to slap a light PPF on his car and run the risk of drivetrain damage even if SR was falsely credited by the idiots at Sport Compact Car mag a couple months ago. I wrote SCC an e-mail on that.
CRH
#418
I couldn't stand it anymore, all this talk about the REVi and I am itching to get one! Actually my wife is buying it for me for my birthday, THAT was a surprise!! :D
I ordered mine this afternoon, they said they will be able to ship it out on Tuesday. They also predict that by monday they won't have any left and will be waiting for the 3rd run (or was it 4th? don't remember). I asked about how the CAI was coming along and if we would be expecting it by end of summer, I was told that they have barely started R&D on it and at this point he did not know. He did mention that like the REVi they are not going to rush anything. I told him that was good to hear, worth the wait for awesome products!
Being in Toronto, Canada I asked if they can deliver other then UPS (UPS charges ridiculous rates for brokerage fees cross border as I found out with the oil and rad mesh covers), they are shipping it USPS Air for me.
I can't wait!
I ordered mine this afternoon, they said they will be able to ship it out on Tuesday. They also predict that by monday they won't have any left and will be waiting for the 3rd run (or was it 4th? don't remember). I asked about how the CAI was coming along and if we would be expecting it by end of summer, I was told that they have barely started R&D on it and at this point he did not know. He did mention that like the REVi they are not going to rush anything. I told him that was good to hear, worth the wait for awesome products!
Being in Toronto, Canada I asked if they can deliver other then UPS (UPS charges ridiculous rates for brokerage fees cross border as I found out with the oil and rad mesh covers), they are shipping it USPS Air for me.
I can't wait!
#421
Originally Posted by SilverBullitt
Would it be a GOOD idea to also remove the black piece under the air inlet duct to let more air flow in? (hope i'm clear)...
#422
Originally Posted by Jdunsh
Could anyone post a picture of the black piece that you removed, I would greatly appreciate it before I do the install. Thanks
#423
I'm surprised that Mazcare only got 2.5 RWHP from the Cat back. however each car is different. With the combination of RB intake and Cat Back you probably regestering 5 HP from the REVI.
So the intake is out of the bag now! 4-5 RWHP with the REVI across the board.
Like I said it's so nice to cruise at low RPM in any gear now because you have the power to accelerate with out downshift.
So the intake is out of the bag now! 4-5 RWHP with the REVI across the board.
Like I said it's so nice to cruise at low RPM in any gear now because you have the power to accelerate with out downshift.
#424
I am wondering if Charlie did any dyno tests of the M versus N flashes. I discovered the very same difference you are describing, Razz, by just upgrading the flash to the N. Unfortunately I now need to re-examine the nitrous situation. Hopefully it is just that my spark plugs are cooked. I have 37K mile on them and two days of hard racing with about 40 pounds of nitrous passed over them, too. Good chance they've had enough.
CRH
CRH
#425
Apexing at Oak Tree
Join Date: Oct 2003
Location: The Blue, Educated State in the North
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Well, I got my intake in the mail yesterday and it looks like Murphy came along in the box. Check out pics at http://www.justindotcom.com/Racing%2.../AllItems.aspx . It looks like the MAF mounting tube had a piece that cracked off. I searched the box and it wasn't in there so it must have happened during the fabbing or something. I removed the MAF sensor and placed it in here to see if there would be a sealing problem. The seal seems to be fine so I'm going to install it tomorrow and call racing beat monday for a replacement. Anyone else have something similiar happen?