Will It Fit Thread
#1552
Piston Traitor
Join Date: Aug 2004
Location: McKinney, Tx
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
I'm running 18x9.5 w/ 35mm offset in the rear. I have 275/30's on the rear. I don't normally rub, but with any extra weight I do. I already have my fenders rolled. Should dropping to a 265 help? Any other suggestions?
#1556
Piston Traitor
Join Date: Aug 2004
Location: McKinney, Tx
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
#1561
mkuhnracing.com
iTrader: (3)
No it will not fit, the RX8 can not fit anything under 8" wide
But really, Yes it will fit, but No you should not get it. Reasons being...
1. Wider usually means more grip. With the 8" wheel(Stock size) you can fit up to a 245mm tire. If you get a 9" Wheel, you can throw some 275's on there.
2. Wider also means it will look more aggressive.
3. Don't go less than 8". Period.
But really, Yes it will fit, but No you should not get it. Reasons being...
1. Wider usually means more grip. With the 8" wheel(Stock size) you can fit up to a 245mm tire. If you get a 9" Wheel, you can throw some 275's on there.
2. Wider also means it will look more aggressive.
3. Don't go less than 8". Period.
#1574
Central Valley RX8
iTrader: (7)
Join Date: Aug 2007
Location: CenCal
Posts: 1,062
Likes: 0
Received 0 Likes
on
0 Posts
Alright, so i'm going from car show to reading up mags. Its time for a change, So imput on these specs would be appreciated.
Been thinking about 18x9 +29 all around. Would I have problems in the front? How about 19x9?
With the offset calculator 18x9 +29 is equivalent to people running 9.8 +35 in depth inwards the fender,
so rear should be fine with a roll and camber work.
Been thinking about 18x9 +29 all around. Would I have problems in the front? How about 19x9?
With the offset calculator 18x9 +29 is equivalent to people running 9.8 +35 in depth inwards the fender,
so rear should be fine with a roll and camber work.
Last edited by Wind Dance; 02-10-2009 at 05:54 PM.