Will It Fit Thread
Any suggestions on suspension shops around NYC to get an alignment and the camber dialed in? I usually do all my work myself, but I dont know how to adjust the camber nor have the proper tools for that job.
Same here I usually do everything myself. But since I've been playing around with my suspension alot lately I figure I'll need an alignment soon. From customers at the auto parts store I work at, I hear TyrolSport is pretty good for lowered cars considering they do laser alignment. Their out in Ridgewood Queens near Brooklyn. They specialize more in Euro cars tho, Audi's VWs.
I suggest not going to any corporate shops. They usually wont run any kind of alignment specs other than stock.
But if you have never had an alignment you reallllly should get one. I check my allignment every time I adjust a control arm. Dialing in negative camber can really **** up your Toe if you dont adjust the toe arms properly to accommodate for the camber adjustment.
But if you have never had an alignment you reallllly should get one. I check my allignment every time I adjust a control arm. Dialing in negative camber can really **** up your Toe if you dont adjust the toe arms properly to accommodate for the camber adjustment.
I've finally chosen a set of wheels, tires, and suspension.
18x10 +20 with 255/35/18'a on all 4 corners, HKS Hypermax RS coilovers.
Now, I'm not looking to slam the car or run silly amounts of camber, but I'm okay with a fender roll/pull. This should be possible, yes?
18x10 +20 with 255/35/18'a on all 4 corners, HKS Hypermax RS coilovers.
Now, I'm not looking to slam the car or run silly amounts of camber, but I'm okay with a fender roll/pull. This should be possible, yes?
I tried searching as much as I could to avoid duplicate posts but no luck.
Looking at getting TSW Nurburgring but they only have a few offsets and I am trying to avoid rolling my fenders and/or adding spacers.
Suspension: Stock height, stock suspension
My best option: (thinking of running square)
Wheels: 18x9 +32
Tires: 245/40R18 Continental ExtremeContact DW
Think this will work?
Thanks,
Looking at getting TSW Nurburgring but they only have a few offsets and I am trying to avoid rolling my fenders and/or adding spacers.
Suspension: Stock height, stock suspension
My best option: (thinking of running square)
Wheels: 18x9 +32
Tires: 245/40R18 Continental ExtremeContact DW
Think this will work?
Thanks,
Last edited by Gregoire; Feb 28, 2013 at 04:03 PM.
noob question
im looking to buy rims on kijiji, and i have a 2004MT, i really dont know much about rims, but i believe im looking for 5 x 114.3.
eeverything in my car is stock
i found a set of these
https://www.wheelfire.com/scontent/W...=zero&SKU=3940
i believe these will fit, but when i put the rx8 in their drop down box, it said that it wont fit my car
i know this might be an UNBELIEVABLE stupid question
but any help would be appreciated
eeverything in my car is stock
i found a set of these
https://www.wheelfire.com/scontent/W...=zero&SKU=3940
i believe these will fit, but when i put the rx8 in their drop down box, it said that it wont fit my car
i know this might be an UNBELIEVABLE stupid question
but any help would be appreciated
Yeah it was. I just want to get to a point where its low, needs a slight pull and I don't have to cut **** apart. I would llike to know the max size I can go to for that if you could tell me. I'm new to all of this so I have no clue
and now that i see your link under diesels nose I completely understand. sorry for the questions when it was right under the nose to begin with. whoops





