regarding jack stand and lift points
05-01-2006, 02:33 PM
#1
Registered
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: California
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
regarding jack stand and lift points
i tried searching, but the pic are all gone. oh well..
can someone clarify exactly what points i use to lift up the car using the jack (i have to 2ton ones from autozone) and where and what points to use for the stands?
hope this becomes DIY for safely jacking up and putting your 8 on jack stands for newbies.
thanks for the help.
can someone clarify exactly what points i use to lift up the car using the jack (i have to 2ton ones from autozone) and where and what points to use for the stands?
hope this becomes DIY for safely jacking up and putting your 8 on jack stands for newbies.
thanks for the help.
05-01-2006, 04:12 PM
#2
Registered
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: California
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
16 views...no replies.
anyways, i checked the manual and it shows which points to jack up the car....can someone show me where i would place the stands?
gracias.
anyways, i checked the manual and it shows which points to jack up the car....can someone show me where i would place the stands?
gracias.
05-01-2006, 04:56 PM
#3
you can lift and jack at the center of the front crossmember behind the plastic undertray and oil tank.
you can jack the rear at the end of the differential. it is where the exhaust pipe bends. jack up on the somewhat shapy looking black fins.
and also, lift and jack stands can be used at the sides stated in the manual.
you can jack the rear at the end of the differential. it is where the exhaust pipe bends. jack up on the somewhat shapy looking black fins.
and also, lift and jack stands can be used at the sides stated in the manual.
05-01-2006, 06:53 PM
#5
Registered User
Join Date: Mar 2005
Location: Southern CA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Those are not it.
check this thread
https://www.rx8club.com/showthread.p...ght=floor+jack
and this website
http://www.hi-impact.org/ryang/modif...ackpoints.html
check this thread
https://www.rx8club.com/showthread.p...ght=floor+jack
and this website
http://www.hi-impact.org/ryang/modif...ackpoints.html
05-01-2006, 08:31 PM
#8
Registered
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: California
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NgoRX8
you can lift and jack at the center of the front crossmember behind the plastic undertray and oil tank.
you can jack the rear at the end of the differential. it is where the exhaust pipe bends. jack up on the somewhat shapy looking black fins.
and also, lift and jack stands can be used at the sides stated in the manual.
you can jack the rear at the end of the differential. it is where the exhaust pipe bends. jack up on the somewhat shapy looking black fins.
and also, lift and jack stands can be used at the sides stated in the manual.
Thread
Thread Starter
Forum
Replies
Last Post
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM
