What is the difference between these two bulbs that are both 6k? One has B/O at the end of it but i don't know what that means.

http://www.v-leds.com/HID-Xenon/V-HI...01152-1-2.html
http://www.v-leds.com/HID-Xenon/D2S-...49015-1-2.html

 

^ i think b/o stands for backordered. it says its out of stock so... "backordered" makes sense

 

Got in on the vleds sale. I ordered the 194 forward style 6k LEDs, for the parking lights. So now I'm waiting on them and my vvme hid fog light kit 3K!!!! Still going with stock xenons for now until after Xmas

 

Hey, how easy is it to change the parking lights or is there a DIY on it already?

 

VERY easy if you have small hands
3min for both max

 

Thanks

 

sure thing
once you get your fingers on it its a quick twist and it pops out, replace the light, and a twist in the opposite direction locks it back in

 

So I just got my 194's in last night and got them installed, I did the Foglight re-wire so my fogs come on separately from my other lights also

I also installed my HID fogs from VVME and OMG the right foglight as you can see below is not working correctly.. what could be the cause? I dont think I touched the bulb while installing it but maybe I did.. any help or ideas?

 

90% of the time its the ballast...they will send you a new one
sometimes they are just duds

 

I hope so, if I have to send it back will there be an issue with it because the way we did it was splice the cables with the original bulb harness. I have sent them an email aready and with pics

 

Shouldnt be a problem IMO
HIDs get a bad rap for being unrealiable but, once you get the kinks worked out and get good ballasts you shouldnt have any problems
also when you take the bulb out think about if you want to take the reflective housing out from in front of the bulb...just something that some people do and like
dispurses the light a little more on the sides...just and idea...color temp will change slightly too

 

If you take the metal shields out, oncoming drivers will be looking directly at the HID capsule, they will no longer be directed at the ground (fog lights) they will be aimed right at peoples eyes(horrible ricey dazzlers)

This is what gets HID upgrade kits a bad name......

(This is why we can't have nice things!)

 

aim them at the ground and you dont have that problem
i drive with them and have never had anyone flash me or complain that they are too bright

 

So I put some 194s in the interior of my car last week and every time I go to start the car, they flicker somewhat like strobe lights. Does this usually happen or is there some what to fix it?

 

all LEDs do this for a while in the interior...because the interior lights fade off/on
after they break in they wont do it anymore...give it a little while

 

I don't know man, I have my entire interior lit by LEDs and none of them have ever strobed or flickered (including the ones that fade off). I have had several exterior LEDs that started doing this just before they failed completely, but that is a different issue.

I'd definitely give them a couple days to see what happens, but it may be that you just got a bad bulb.

 

i have full LED interiors in both my 8s and they both did it when I put the LEDs in but, after they broke in (a few weeks) i had no problems
i have this 194 SMT LED for all my interior/exterior 194 bulbs:

http://www.v-leds.com/Interior-LED-B...87987-1-2.html

 

i have full LED interiors in both my 8s and they both did it when I put the LEDs in but, after they broke in (a few weeks) i had no problems
i have this 194 SMT LED for all my interior/exterior 194 bulbs:

http://www.v-leds.com/Interior-LED-B...87987-1-2.html
I have ran 20 of these bulbs for about a year and a half now with no problems (map lights, courtesy lights, license plate, trunk, side markers, parking lights) X 2
may be too bright for some people as far as interior lights go

 

Wow that's a bright bulb to have inside your car! I have those for my parking lights, and other types of 194's all around the car. Never had any break-in period though!

 

Mine still flicker as well as my footwells if I recall correctly. I remember reading in this thread it had to do with the fact that LEDs arent meant to dim like oem lights so the tend to flicker.

 

There's another thread about the flicker issue here: https://www.rx8club.com/showthread.p...ht=led+flicker

It talks about using a capacitor to get rid of the flicker, but I'm still not sure why I don't have any issues with my LEDs. I have footwell LEDs, as well as the door and dome LEDs that do not flicker, and fade off when the door closes.

 

Where exactly would I add the capacitor that that topic talks about?

 

Honestly I don't know. I thought they were only used in audio applications. But I do know that many people here have LEDs in their cars without the need for any extra equipment (except resistors if you're using them for the blinkers).

Plus, the one guy says that a with a capacitor you'd lose the dimming effect. Not really desirable...

 

like I said all of mine flickered for a little while (a few weeks) but then stopped and now fade on/off like the OEM lights did

 

After just 4 months of running my HID fogs, one of the bulbs died already. How does the warranty work with VLEDS. Am I suppose to send the whole kit back? The ballast are mounted on and everything already. Are these H11 kits prone to failure like this?