Remanufactured Rotary engines!!
#79
Originally Posted by TeamRX8
for $2k I can only assume it's not getting all new rotor springs/seals/bearings i.e. re-using these parts as you can
Paul.
#80
Originally Posted by dannobre
Any news on the water pump Paul???
Paul.
#81
Registered
iTrader: (25)
Originally Posted by Mazmart
That would be correct to an extent. It definitely does not include a pair of new rotor housings and some seals you practically never want to re-use, especially in a Renesis (Side seals). All of our engines have resurfaced flat housings and modified 3rd gen RX7 corner seal springs. You're better off not replacing a broken in bearing if it's in great shape but we do replace them as necessary. Apex seals are scrutinized, measured and replaced as necessary. $2000 is definitely a starting point only.
Paul.
Paul.
thanks for the clarification
Are you doing 6-port on exchange or rebuild&return?
MS
Last edited by TeamRX8; 12-22-2006 at 03:58 PM.
#82
Re-build and return will be the most common method, however, the auto (4 port) that I presently have in stock I am doing exchange on with a core charge. I will take this approach from time to time.
I'm guessing that a good recommendation for your application would be similar to what we have built for Grand Am race teams including ceramic seals and new rotor housings.
Paul.
I'm guessing that a good recommendation for your application would be similar to what we have built for Grand Am race teams including ceramic seals and new rotor housings.
Paul.
#83
Registered
iTrader: (3)
and all of this almost in my backyard! I wished now that I had asked for a day at Mazmart with the gang for Christmas. But--hey--Christmas can be just about anytime cant it?
Ditto--on the waterpump Paul, one question --can you also get a barrel type 180F thermostat?
I ---still---would like to see an electric water pump--!
After the holidays I am thinking of buying the cheap one through Summitt. Doing the dyno with and without (with Charlies help I hope) and see the results. I would not be surprised to see 10-15 horses set free. Then that will get the people's attention. This idea has to come. There are bigger reasons to have it than the extra horses to the wheel. Sorry--getting on my soapbox here!
MERRY CHRISTMAS ALL!!!
Olddragger
Ditto--on the waterpump Paul, one question --can you also get a barrel type 180F thermostat?
I ---still---would like to see an electric water pump--!
After the holidays I am thinking of buying the cheap one through Summitt. Doing the dyno with and without (with Charlies help I hope) and see the results. I would not be surprised to see 10-15 horses set free. Then that will get the people's attention. This idea has to come. There are bigger reasons to have it than the extra horses to the wheel. Sorry--getting on my soapbox here!
MERRY CHRISTMAS ALL!!!
Olddragger
#85
Registered
iTrader: (25)
no, the engine rules in my current class are stricter than GrandAm; all OE parts only, no internal mods, even alternate corner seals are not allowed. So if I bought an engine from you it would need to be a 100% factory rebuild
I was considering pulling and blueprinting my engine, that's why I asked the question
I was considering pulling and blueprinting my engine, that's why I asked the question
Last edited by TeamRX8; 12-23-2006 at 06:33 PM.
#86
Originally Posted by TeamRX8
no, the engine rules in my current class are stricter than GrandAm; all OE parts only, no internal mods, even alternate corner seals are not allowed. So if I bought an engine from you it would need to be a 100% factory rebuild
I was considering pulling and blueprinting my engine, that's why I asked the question
I was considering pulling and blueprinting my engine, that's why I asked the question
Paul.
#90
Originally Posted by MazdaMonkey
Any updates?
Paul.
#91
destination anywhere..
Join Date: Jan 2007
Location: Calgary, Alberta
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
Hi, looking for a 13B for a friend...
https://www.rx8club.com/series-i-tech-garage-22/replacement-engine-cost-109303/
He wants new in the crate (yikes!) but I think rebuilt will be fine.. since he seeks my 'expert' opinion..
Could I get an approximate price/shipping cost to Calgary, Alberta, Canada?
Thanks!
https://www.rx8club.com/series-i-tech-garage-22/replacement-engine-cost-109303/
He wants new in the crate (yikes!) but I think rebuilt will be fine.. since he seeks my 'expert' opinion..
Could I get an approximate price/shipping cost to Calgary, Alberta, Canada?
Thanks!
#92
Originally Posted by early 30's crisis
Hi, looking for a 13B for a friend...
https://www.rx8club.com/showthread.php?t=109303
He wants new in the crate (yikes!) but I think rebuilt will be fine.. since he seeks my 'expert' opinion..
Could I get an approximate price/shipping cost to Calgary, Alberta, Canada?
Thanks!
https://www.rx8club.com/showthread.php?t=109303
He wants new in the crate (yikes!) but I think rebuilt will be fine.. since he seeks my 'expert' opinion..
Could I get an approximate price/shipping cost to Calgary, Alberta, Canada?
Thanks!
There is a tremendous range of what I can offer, including all new engine parts and mildly used accessories or a dressed used motor or a dressed reman motor. I'd say $3000 to $6000 plus shipping.
Paul.
#95
It's a 6 port with 30k for $1850.
See the following thread for details and pictures:
https://www.rx8club.com/mazmart-88/going-fast-motors-stock-127868/
See the following thread for details and pictures:
https://www.rx8club.com/mazmart-88/going-fast-motors-stock-127868/
#97
Administrator
iTrader: (7)
Great news on the price drop! Hope I never need one BUT if I do, I know who to call.
#98
I now have a brand new 4 Port RX-8 Motor in stock.
Please see this thread for details:
https://www.rx8club.com/showthread.p...14#post2115714
Please see this thread for details:
https://www.rx8club.com/showthread.p...14#post2115714