Las Vegas Lounge
12-18-2012, 09:18 PM
Rotors-over-pistons
Not yet, its sitting here still. What's everybody up to tomorrow? I have the entire day with nothing to do, and that Revi wants to get in my engine bay
12-19-2012, 10:41 AM
Well Kevin & Anthony, bring it over to my place and we'll get it done today (weds morning). Inside the garage, out of the wind/cold!
BTW, I finally sorted out my idle issues... had two injector wires switched. They were the blue (lavinder) colored ones. Had to peel back the black cover to see the real ( nonfaded) color.
BTW, I finally sorted out my idle issues... had two injector wires switched. They were the blue (lavinder) colored ones. Had to peel back the black cover to see the real ( nonfaded) color.
Last edited by Squishband; 12-20-2012 at 10:44 AM.
12-19-2012, 12:26 PM
Rotors-over-pistons
I'm down, Anthony is too, looks like what we'll need is a lift, contact cleaner and some tools. I had to leave mine in OC so is there anything I need to buy on the way to your place?
12-20-2012, 10:16 AM
Spinning Triangles GO!!
Join Date: Jun 2012
Location: altamonte springs mall area.
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
No problem kev. It was fun skipping steps.
Anyway everyone sincity rotary is having the weekly meet and everyone is invited. The meet is tonight at 8pm at the in and out on sahara by the palace station. Swing by as we will be discussing the annual winter cruise route dated 01/20/13.
Anyway everyone sincity rotary is having the weekly meet and everyone is invited. The meet is tonight at 8pm at the in and out on sahara by the palace station. Swing by as we will be discussing the annual winter cruise route dated 01/20/13.
12-21-2012, 12:39 PM
I've been extreamly busy and have not been able to find time to get to the forum. I do want to wish you all a very Merry Christmas.
12-22-2012, 06:23 PM
Registered
Saw a gray rx8 parked in the second level of the orleans parking garage from 2 pm to around 3:30 pm when I left. It had shinka b pillar stick ons(https://i.imgur.com/tmudO.jpg) and a silver fuel door, anyone here? Didn't have anything to write on or I would have left a note for them to come on here if they didn't already.
12-23-2012, 02:16 AM
SinCityRotary
Join Date: Jan 2010
Location: Lost Wages, Nev
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
^ not really a bell with me (we actually have tag cards we use when we find other rotaries)
today saw a later VR 8 outside toy r us at the Meadows Mall ... then as we were at the light at Decatur a yellow 8 with rims with red lips passed us Northbound
today saw a later VR 8 outside toy r us at the Meadows Mall ... then as we were at the light at Decatur a yellow 8 with rims with red lips passed us Northbound
12-23-2012, 12:41 PM
Registered User
Join Date: Jul 2003
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Are there any suggestions on what garage to take my 8 to for some trouble shooting / engine work. I was driving home last week and the thing started running really rough and even with some electrical smelling smoke coming out from under the hood. I am not a fan of the Mazda dealer at the auto mall in Henderson and I am willing to try an independent garage someone has experience with. Help
12-23-2012, 01:24 PM
Spinning Triangles GO!!
Join Date: Jun 2012
Location: altamonte springs mall area.
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
spotted and tagged with SCR card, red rx8 with chrome factory wheels parking lot of Best Buy in Henderson at 11:20 it was here yesterday too around the same time. It has a cross hanging from the rear view. Look like a base model.
12-23-2012, 11:25 PM
Registered
Are there any suggestions on what garage to take my 8 to for some trouble shooting / engine work. I was driving home last week and the thing started running really rough and even with some electrical smelling smoke coming out from under the hood. I am not a fan of the Mazda dealer at the auto mall in Henderson and I am willing to try an independent garage someone has experience with. Help
Send a PM to Karack.
01-02-2013, 02:35 PM
Boostlee coming soon.
Join Date: May 2010
Location: Las Vegas,NV
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Well first off let me start by saying Happy New Year and a Merry Belated Xmas to my extended rotary family. Now Q&A time, my I installed and after market exhaust on my Rx8 last year and yes it came with a port for me to screw in the O2 sensor but my check engine light has never gone off and now its smog time, what are my options for me to pass smog and get my tags without having to shell out hundreds of dollars? Thanks Fam.
01-02-2013, 03:30 PM
Spinning Triangles GO!!
Join Date: Jun 2012
Location: altamonte springs mall area.
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
same wishes to you now someone correct me if wrong but that being said im going to assume that you're worried because u have a cat less mid pipe. If u have not gotten a CEL then u might be one of the lucky few. To double check have a friend with a scan tool or drive to auto zone and have them scan ur car to see if there are any stored or hidden codes. If nothing shows ur clear just don't tell the smog guy u have no cat. Hes not likely to look since our cars sit so low. Good luck.
01-02-2013, 09:20 PM
Registered
I have smog coming up myself, but it is very easy to pass without a cat. There is a DIY thread about it. Basically do what Anthony said. You can pass smog with 1 emissions test incomplete which usually ends up being the cat test. If you have an obd2 scanner you can constantly check and wait until that happens.
01-03-2013, 05:34 PM
Registered
Just don't tell them what you are doing, just ask if the scanner says your are emissions ready or not.
https://www.rx8club.com/do-yourself-...ed-cat-227558/
https://www.rx8club.com/do-yourself-...ed-cat-227558/
01-04-2013, 02:23 AM
Registered
It is more than just the light being out though. You need to delete the code or reset the computer and then let all but one test complete and you are good. If more than one test is incomplete even with the light out you will not pass.