Will It Fit Thread
#2076
Official Post Whore
iTrader: (2)
245/35 all around will be the safest option. I have the same size and offset and with 255/35 I rub a touch on the wheel liner up front. FWIW I'm thinking it may because KDW2s run wider than other brands of the same size. Check the thread below to see pics of what I'm talking about.
https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/wheel-well-liner-rub-141153/
https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/wheel-well-liner-rub-141153/
#2079
Anyone else running 255/35/19 on a similar set up care to chime in.
The thread pdxhak linked to leads on that the kdw2s he was (is) running are a bit "chunkier" than advertised. Im currently looking at Toyo T1Rs and was initially leaning towards the 255/35/19 since they are closer in measurements to the OE setup.
The thread pdxhak linked to leads on that the kdw2s he was (is) running are a bit "chunkier" than advertised. Im currently looking at Toyo T1Rs and was initially leaning towards the 255/35/19 since they are closer in measurements to the OE setup.
#2080
Registered
iTrader: (2)
Join Date: Nov 2007
Location: The Sticks, MO
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Ok so before I make the purchase 18x9.5 +30 with 275/35 tires on all corners will fit on tein-s tech springs. I am just really scared I have never bought rims for any car I have had.
#2086
Registered
iTrader: (1)
Join Date: Nov 2007
Location: Denver
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
I found this out because the place that I purchased my tires from ordered the wrong tires and placed the wrong sized tires on my stock wheels.
255/40R-18 sumitomo htrz-IIIs weigh 29lbs each!! Because of their mistake they gave me 235/40R-18 pricing on the 255s. I would like to say i'm mad because of how goofy they look (my dad thinks they look cool...but he's and old and used to old tires at 70+ series sidewalls), however, part of me is excited to see how much slower i am at the track...while being faster in the turns maybe!
#2089
No respecter of malarkey
iTrader: (25)
I run 255/40-18 Hoosier DOT-R Wet Radials for rain tires when racing
but that didn't seem to be the case in your reply chain
Not trying to be an *** because you obviously have a good knowledge on how wheels and tires fit. But I'm curious why think that when I have a thread showing otherwise?
but that didn't seem to be the case in your reply chain
Not trying to be an *** because you obviously have a good knowledge on how wheels and tires fit. But I'm curious why think that when I have a thread showing otherwise?
#2090
Official Post Whore
iTrader: (2)
Team you are missing my first post.
Post #2070 HyJynx V asks question.
Post #2071 I say there may be an issue and provided a thread showing an actual setup that has a problem.
Post #2072 imput1234 says either will be fine.
Post #2073 I ask imput1234 why he thinks that when I just provided a thread there could be an issue with proof.
Post #2070 HyJynx V asks question.
Post #2071 I say there may be an issue and provided a thread showing an actual setup that has a problem.
Post #2072 imput1234 says either will be fine.
Post #2073 I ask imput1234 why he thinks that when I just provided a thread there could be an issue with proof.
#2091
Rarely post...does any know if these will fit?
http://calgary.kijiji.ca/c-cars-vehi...AdIdZ119651440
total rim/tire newb... i always ask about rim questions and i never seem to learn/remember anything of it haha..
Thanks!
http://calgary.kijiji.ca/c-cars-vehi...AdIdZ119651440
total rim/tire newb... i always ask about rim questions and i never seem to learn/remember anything of it haha..
Thanks!
#2094
My question with the tires, is because im looking into buying second hand tires (broke right now)...
so 245/40 would be ok, but what about 245/45? would there be any problems with a slight bigger size there?
so 245/40 would be ok, but what about 245/45? would there be any problems with a slight bigger size there?
#2096
U.S ARMY 11B
Join Date: Nov 2007
Location: I AM THE INFANTRY FOLLOW ME!
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
how about a 17x10 witha 35mm offset Would that be safly to run? i also never had bought wheels for anycar so im not to bright when it comes to them
#2098
U.S ARMY 11B
Join Date: Nov 2007
Location: I AM THE INFANTRY FOLLOW ME!
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Hello friends! wheel torubles/clearing issues
Hey guys its about time i saved up some money for some new set of wheels. Im intersted in 17x10 and mst chances will purchase the 17X10 5Zigen FN01r-Cs My issue is Im not sure if i'll be able to clear the front break! ETC! So if there is anyone outthere that can tell if a +35 mikemike offset will do? or if they will clear the breaks etc. Or ill just have to roll my fenders! anyhelp would be apreciated!