Will It Fit Thread
245/35 all around will be the safest option. I have the same size and offset and with 255/35 I rub a touch on the wheel liner up front. FWIW I'm thinking it may because KDW2s run wider than other brands of the same size. Check the thread below to see pics of what I'm talking about.
https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/wheel-well-liner-rub-141153/
https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/wheel-well-liner-rub-141153/
Anyone else running 255/35/19 on a similar set up care to chime in.
The thread pdxhak linked to leads on that the kdw2s he was (is) running are a bit "chunkier" than advertised. Im currently looking at Toyo T1Rs and was initially leaning towards the 255/35/19 since they are closer in measurements to the OE setup.
The thread pdxhak linked to leads on that the kdw2s he was (is) running are a bit "chunkier" than advertised. Im currently looking at Toyo T1Rs and was initially leaning towards the 255/35/19 since they are closer in measurements to the OE setup.
Ok so before I make the purchase 18x9.5 +30 with 275/35 tires on all corners will fit on tein-s tech springs. I am just really scared I have never bought rims for any car I have had.
I mean it's possible that you will rub the fender liner on the inside. You will be fine on the outside if you roll the fenders, but you will probably still rub the liner..
I found this out because the place that I purchased my tires from ordered the wrong tires and placed the wrong sized tires on my stock wheels.
255/40R-18 sumitomo htrz-IIIs weigh 29lbs each!! Because of their mistake they gave me 235/40R-18 pricing on the 255s. I would like to say i'm mad because of how goofy they look (my dad thinks they look cool...but he's and old and used to old tires at 70+ series sidewalls), however, part of me is excited to see how much slower i am at the track...while being faster in the turns maybe!
I run 255/40-18 Hoosier DOT-R Wet Radials for rain tires when racing 
but that didn't seem to be the case in your reply chain

Not trying to be an *** because you obviously have a good knowledge on how wheels and tires fit. But I'm curious why think that when I have a thread showing otherwise?

but that didn't seem to be the case in your reply chain

Not trying to be an *** because you obviously have a good knowledge on how wheels and tires fit. But I'm curious why think that when I have a thread showing otherwise?
Team you are missing my first post.
Post #2070 HyJynx V asks question.
Post #2071 I say there may be an issue and provided a thread showing an actual setup that has a problem.
Post #2072 imput1234 says either will be fine.
Post #2073 I ask imput1234 why he thinks that when I just provided a thread there could be an issue with proof.
Post #2070 HyJynx V asks question.
Post #2071 I say there may be an issue and provided a thread showing an actual setup that has a problem.
Post #2072 imput1234 says either will be fine.
Post #2073 I ask imput1234 why he thinks that when I just provided a thread there could be an issue with proof.
Rarely post...does any know if these will fit?
http://calgary.kijiji.ca/c-cars-vehi...AdIdZ119651440
total rim/tire newb... i always ask about rim questions and i never seem to learn/remember anything of it haha..
Thanks!
http://calgary.kijiji.ca/c-cars-vehi...AdIdZ119651440
total rim/tire newb... i always ask about rim questions and i never seem to learn/remember anything of it haha..
Thanks!
Hello friends! wheel torubles/clearing issues
Hey guys its about time i saved up some money for some new set of wheels. Im intersted in 17x10 and mst chances will purchase the 17X10 5Zigen FN01r-Cs My issue is Im not sure if i'll be able to clear the front break! ETC! So if there is anyone outthere that can tell if a +35 mikemike offset will do? or if they will clear the breaks etc. Or ill just have to roll my fenders! anyhelp would be apreciated!



