Will It Fit Thread
#8101
well clearly you care about looks n' all J is telling you is that it's going to look like ****.
wayyy tucked in the front w/fatter tucked wheels in back.
Simple message to all, stop aiming for mediocrity. If you want "close to flush" then roll your fenders...any fitment w/out rolled fenders is NOT close to flush.
wayyy tucked in the front w/fatter tucked wheels in back.
Simple message to all, stop aiming for mediocrity. If you want "close to flush" then roll your fenders...any fitment w/out rolled fenders is NOT close to flush.
So J, even though you were kindof an thanks for the input.
And now that I've thought about it more I don't want to weigh down the car with too big of wheels. I'll probably Just do 8.5 all the way around, lowered, with rolled fenders. What should I be looking at for offset to get as close as possible without having to worry about rubbing or anything else?
#8103
J I wasn't trying to sound sarcastic. I was actually thanking you for pointing out that that would look bad lol. The way you said it.. yeah, you were kindof an ***.. But that's part of life on any forum.
#8108
Wanting to get more flush than I am now (which is stock == not at all).
Currently running stock height, will be changing that in the late spring with a set of Tein S...
Wanted to make sure that I am not going to have to camber my wheels or roll my fenders or any of that stuff.
Front: 18 x 8.5 + 45
Read: 18 x 9.5 + 35 (or +45).
Any opinions?
Currently running stock height, will be changing that in the late spring with a set of Tein S...
Wanted to make sure that I am not going to have to camber my wheels or roll my fenders or any of that stuff.
Front: 18 x 8.5 + 45
Read: 18 x 9.5 + 35 (or +45).
Any opinions?
#8110
will these fit my rx8
2005 mazda rx8:
Not moded not lowered.
Quick Specs:
18x8
Offset: 20.00 mm
Max Load: *1600 lb
Wheel Diameter:18.00 in
poWheel Width:8.00 in
poBolt Pattern:5-114.3 mm
Centricity:LugCentric / Centrée en fonction des goujons
Colour:BlackFinish:Black W/ Machined Face
would these fit on my rx8 i need to know for sure since there special order :P
also i need to know would they fit on 225/45/r18
tyvm
Not moded not lowered.
Quick Specs:
18x8
Offset: 20.00 mm
Max Load: *1600 lb
Wheel Diameter:18.00 in
poWheel Width:8.00 in
poBolt Pattern:5-114.3 mm
Centricity:LugCentric / Centrée en fonction des goujons
Colour:BlackFinish:Black W/ Machined Face
would these fit on my rx8 i need to know for sure since there special order :P
also i need to know would they fit on 225/45/r18
tyvm
Last edited by DestLuck; 03-30-2012 at 09:02 AM.
#8113
ok im not looking for something to wide i dont want to have to mess around with the fenders. i dont want my tires to stick out from the side of the car either. Sorry i aint good with Wheels and tires at all so a bit lost. ive been reading up a bit . As for you saying to go wider, what do you have in mind here is the whole list of the wheels i can get in this model:
16" x 7" 4/100 & 4/114.3 42 offset
16" x 7" 5/100 & 5/114.3 42 offset
16" x 7" 5/112 & 5/120 42 offset
18" x 8" 5/114.3 & 5/120 20 offset
18" x 8" 5/112 & 5/120 40 offset
18" x 8" 5/110 & 5/115 40 offset
18" x 8" 5/108 & 5/114.3 40 offset
20" x 8.5" 5/114.3 & 5/120 20 offset
20" x 8.5" 5/114.3 & 5/120 40 offset
20" x 8.5" 5/112 & 5/115 40 offset
lemme know what you think i want to fit lowprofile tires on the wheels aventually so keep that in mind but im running my normaly 225/45/r18 tires right now
also when i use the wheel fitment tool on there site i get:
18x8 - 20mm - 5/114.3
18x8 is too wide for that vehicle.
20mm is a too low offset for a 18x8 wheel.
18x8 - 40mm - 5/114.3
18x8 is too wide for that vehicle.
16" x 7" 4/100 & 4/114.3 42 offset
16" x 7" 5/100 & 5/114.3 42 offset
16" x 7" 5/112 & 5/120 42 offset
18" x 8" 5/114.3 & 5/120 20 offset
18" x 8" 5/112 & 5/120 40 offset
18" x 8" 5/110 & 5/115 40 offset
18" x 8" 5/108 & 5/114.3 40 offset
20" x 8.5" 5/114.3 & 5/120 20 offset
20" x 8.5" 5/114.3 & 5/120 40 offset
20" x 8.5" 5/112 & 5/115 40 offset
lemme know what you think i want to fit lowprofile tires on the wheels aventually so keep that in mind but im running my normaly 225/45/r18 tires right now
also when i use the wheel fitment tool on there site i get:
18x8 - 20mm - 5/114.3
18x8 is too wide for that vehicle.
20mm is a too low offset for a 18x8 wheel.
18x8 - 40mm - 5/114.3
18x8 is too wide for that vehicle.
Last edited by DestLuck; 03-30-2012 at 02:41 PM.
#8119
Destluck I have an 05 rx8 not lowered (yet) and have 18x9 +40 and have no rub with no modifying of fenders wat so ever.. sits a little in by centimeters.. if that helps... tires are 245 40 18
#8121
My friend had a set of custom, staggered rims on his 01 BMW 325 which he totaled. The rears are 275/35/19 & the fronts are 235/45/19. I have the 04 RX8 AT with the factory 16" rims
1) Will they fit without rubbing?
2) Are they too big for my 04 RX8's auto transmission?
3) He didnt know the offset/inset; can I measure with a tape measure?
Thanks,
1) Will they fit without rubbing?
2) Are they too big for my 04 RX8's auto transmission?
3) He didnt know the offset/inset; can I measure with a tape measure?
Thanks,