Aggressive Wheel Fitment Thread
#9055
Drift Happens
iTrader: (2)
there is no suspension requirements in this thread you are correct, but this is THE AGGRESSIVE FITMENT THREAD
PULLING OFF THE RIGHT FITMENT IS NOT GOING TO HAPPEN WITH SPRINGS, EVEN IF THEY DID LOWER ENOUGH, WHICH THEY DON'T. THE SPRING RATES ARE SO SOFT YOU WOULD BE RUBBING 24/7 AND THE FENDERS WOULD PROBABLY BE FUBAR.
PULLING OFF THE RIGHT FITMENT IS NOT GOING TO HAPPEN WITH SPRINGS, EVEN IF THEY DID LOWER ENOUGH, WHICH THEY DON'T. THE SPRING RATES ARE SO SOFT YOU WOULD BE RUBBING 24/7 AND THE FENDERS WOULD PROBABLY BE FUBAR.
#9056
Old stance 19x10 265 35 19 (All 4), dropped on D2's
Attachment 188205
New Stance CCW's 18x10.5 225 35 18 (All 4) dropped on BC Coliovers.
Attachment 188206
Attachment 188205
New Stance CCW's 18x10.5 225 35 18 (All 4) dropped on BC Coliovers.
Attachment 188206
I have some BC's atm until my custom ordered Silkroads get here and I absolutely hate these things... so much suspension travel and droop...
Any advice to minimize the suspension travel on these things? My 18x9.5 +22 all round TE37s are getting mounted friday when they get back from the powder coaters...
#9057
I HATE SPEEDBUMPS!
#9059
I HATE SPEEDBUMPS!
#9060
Wheels, not rims!!
iTrader: (8)
Old stance 19x10 265 35 19 (All 4), dropped on D2's
Attachment 188205
New Stance CCW's 18x10.5 225 35 18 (All 4) dropped on BC Coliovers.
Attachment 188206
Attachment 188205
New Stance CCW's 18x10.5 225 35 18 (All 4) dropped on BC Coliovers.
Attachment 188206
#9062
#9066
Danny Rotstein
iTrader: (10)
Join Date: Dec 2009
Location: Chicago
Posts: 1,325
Likes: 0
Received 0 Likes
on
0 Posts
I'm on -4.4 in the rear right now.
#9069
Dude can I ask what kind of config you have done on your BC's?
I have some BC's atm until my custom ordered Silkroads get here and I absolutely hate these things... so much suspension travel and droop...
Any advice to minimize the suspension travel on these things? My 18x9.5 +22 all round TE37s are getting mounted friday when they get back from the powder coaters...
I have some BC's atm until my custom ordered Silkroads get here and I absolutely hate these things... so much suspension travel and droop...
Any advice to minimize the suspension travel on these things? My 18x9.5 +22 all round TE37s are getting mounted friday when they get back from the powder coaters...
#9070
#9073
My problem isn't the wheels hitting... its the fact that I push hard in the hills and my rails are grinding down pretty hard...
#9074
http://www.flickr.com/photos/77117762@N08/7849193810/http://www.flickr.com/photos/77117762@N08/7849193810/ by http://www.flickr.com/people/77117762@N08/, on Flickr
iphone pic, gettin camber re adjusted,
iphone pic, gettin camber re adjusted,