RECALL THREAD/MNAO suspend RX-8 deliveries.
07-27-2005, 08:04 PM
#601
He's as bad as Can
Originally Posted by thew
my guess is they checked your 8 for the defective lower A arm ball joint . If it had the right Part number then your ok and they let you go.. as of yet there not doing any gas tank stuff untill they Mail you out the Notice from Mazda.. You are lucky they did not try to hold your 8 untill they had the gas tank parts .. 
07-27-2005, 08:05 PM
#602
Thews8
That is Crazy.. your Exhaust comes of just like the OEM unit except is easyer to remove than Stock.. They can't charge you to remove anything at all for a Recall inspection.. You need to make them give you your money back.. Thats not right at all !!!
Originally Posted by loco4rx8
I also got the 3305G recall taken care of today when I took the car in for its 40k service. It's a Group 1 car. I didn't mention the recalls, they took care of it themselves. I'll still have to take it back for the other recall, but I'm glad to get this one taken care of.
Incidentally, I talked to the tech who did the work, and he said he saw no heat damage to my car.
Oh, and I haven't noticed any difference so far since moving up to the 'R' flash. I don't know if it was supposed to make any differences to normal driveability or not. I got the 'N' flash at the beginning of May and my MPG went up over 1mpg since then. I hope 'R' doesn't screw that up somehow. I will keep an eye on it.
Edited to Add:
I should point out that my dealer gave me just a little trouble about my aftermarket (Borla) exhaust. I had to pay them for the hour of labor to drop the exhaust to do the recall work. They told me they'd "look the other way" on the aftermarket part if I paid the labor. I felt like that was kind of lame and baseless, but I wasn't in the mood to fight with them over $40 so I just paid it.
Just wanted to say that in case anyone else is concerned about their aftermarket exhaust. I'm wondering if my dealer is the only one who has bitched about it.
Incidentally, I talked to the tech who did the work, and he said he saw no heat damage to my car.
Oh, and I haven't noticed any difference so far since moving up to the 'R' flash. I don't know if it was supposed to make any differences to normal driveability or not. I got the 'N' flash at the beginning of May and my MPG went up over 1mpg since then. I hope 'R' doesn't screw that up somehow. I will keep an eye on it.
Edited to Add:
I should point out that my dealer gave me just a little trouble about my aftermarket (Borla) exhaust. I had to pay them for the hour of labor to drop the exhaust to do the recall work. They told me they'd "look the other way" on the aftermarket part if I paid the labor. I felt like that was kind of lame and baseless, but I wasn't in the mood to fight with them over $40 so I just paid it.
Just wanted to say that in case anyone else is concerned about their aftermarket exhaust. I'm wondering if my dealer is the only one who has bitched about it.
07-27-2005, 08:06 PM
#603
BSG 75
Join Date: Jul 2003
Location: Virginia
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
I will look tomorrow when it's daylight again, but I doubt I'd be able to get a decent pic. I have no way of lifting the car. But I will look.
There is no campaign sticker under the hood or in either door jamb. I didn't look anywhere else but I can't imagine where else they'd put it.... weird.
I don't know how long it took them for sure because I left the car there, but it couldn't have been longer than two hours because they called me to verify whether I'd pay the labor cost before doing the work and then called back two hours later after it was done.
There is no campaign sticker under the hood or in either door jamb. I didn't look anywhere else but I can't imagine where else they'd put it.... weird.
I don't know how long it took them for sure because I left the car there, but it couldn't have been longer than two hours because they called me to verify whether I'd pay the labor cost before doing the work and then called back two hours later after it was done.
07-27-2005, 08:08 PM
#604
BSG 75
Join Date: Jul 2003
Location: Virginia
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thew
That is Crazy.. your Exhaust comes of just like the OEM unit except is easyer to remove than Stock.. They can't charge you to remove anything at all for a Recall inspection.. You need to make them give you your money back.. Thats not right at all !!!
You know, I said the exact same thing and I started to argue with him and then I just sat back and decided it wasn't worth the $40 to make a stink about it. He didn't seem inclined to budge so I backed off. If it had been a several hundred dollar charge, I would've fought it for sure.
07-27-2005, 08:09 PM
#605
Senior Geek
Join Date: Aug 2003
Location: Richardson, TX
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by expo1
Nope, scroll up to post # 601 I have a pic of the invoice they did the gas tank recall 3305G
Last edited by RX8-TX; 07-27-2005 at 08:14 PM.
07-27-2005, 08:09 PM
#606
Administrator
Originally Posted by thew
my guess is they checked your 8 for the defective lower A arm ball joint . If it had the right Part number then your ok and they let you go.. as of yet there not doing any gas tank stuff untill they Mail you out the Notice from Mazda.. You are lucky they did not try to hold your 8 untill they had the gas tank parts ..
no they didnt the recall number they put on his paperwork is for the thermal issue.
07-27-2005, 08:16 PM
#607
Administrator
Originally Posted by RX8-TX
Funny thing is, the invoice says YOU told them about the recall as a "concern". And unless I am going completely blind, it doesn't mention anything about an actual recall procedure being done on your car.
i have it on good authority that they "closed" the issue in the system
07-27-2005, 08:20 PM
#608
Senior Geek
Join Date: Aug 2003
Location: Richardson, TX
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zoom44
i have it on good authority that they "closed" the issue in the system
07-27-2005, 08:28 PM
#609
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by expo1
..... But I have a feeling all the recall procedures were not followed.
07-27-2005, 08:36 PM
#611
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thew
That is Crazy.. your Exhaust comes of just like the OEM unit except is easyer to remove than Stock.. They can't charge you to remove anything at all for a Recall inspection.. You need to make them give you your money back.. Thats not right at all !!!
07-27-2005, 08:41 PM
#613
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RX8-TX
Funny thing is, the invoice says YOU told them about the recall as a "concern". And unless I am going completely blind, it doesn't mention anything about an actual recall procedure being done on your car.
07-27-2005, 08:45 PM
#614
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by loco4rx8
Do you have to remove the exhaust to get to the fuel tank? I don't know - I'm just guessing here. I'm really not very knowledgeable about this stuff.
07-27-2005, 09:04 PM
#616
BSG 75
Join Date: Jul 2003
Location: Virginia
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Well, when you put it like that, zoom44. I believe I will send them a letter. I tend to get a better response that way. I'll just tell them that I don't believe I should've been charged for the recall work and I'd like a thorough explanation of why they felt they had to remove the exhaust to perform the work and why I had to pay for it.
Thank you all for the info.
Thank you all for the info.
07-28-2005, 01:52 AM
#617
Registered
Join Date: Aug 2003
Location: Brisbane, Australia
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Recall is out in Australia too:
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
http://www.recalls.gov.au/view_recal..._ID_Auto=13528
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
http://www.recalls.gov.au/view_recal..._ID_Auto=13528
07-28-2005, 02:01 AM
#618
05 Champ Car Test Driver
Join Date: Jul 2004
Location: Calgary, AB - Canada
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sco
Recall is out in Australia too:
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
http://www.recalls.gov.au/view_recal..._ID_Auto=13528
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
http://www.recalls.gov.au/view_recal..._ID_Auto=13528
07-28-2005, 04:39 AM
#619
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sco
Recall is out in Australia too:
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
http://www.recalls.gov.au/view_recal..._ID_Auto=13528
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
http://www.recalls.gov.au/view_recal..._ID_Auto=13528
. I have L4 and MQ lower control arms....
07-29-2005, 10:43 AM
#620
Administrator
expo- this is what was on the invoice of another member fore the work done
your invoice should have looked like that
Originally Posted by unpocoloco
Work I had done:
* Full Circle Vehicle Checkup
* Recall 3305G: R-8 Thermal Damage
1 Pad, INsulator
Inspected Fuel Tank and other locatios for damage
Installed foam pad on fuel tank
Reflashed PCM with latest
* Oil change & 3000 Mile Interval Service
* Latch fixed
* Full Circle Vehicle Checkup
* Recall 3305G: R-8 Thermal Damage
1 Pad, INsulator
Inspected Fuel Tank and other locatios for damage
Installed foam pad on fuel tank
Reflashed PCM with latest
* Oil change & 3000 Mile Interval Service
* Latch fixed
your invoice should have looked like that
07-29-2005, 11:50 AM
#621
Senior Geek
Join Date: Aug 2003
Location: Richardson, TX
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Lschiavo
Mazda RX ??? It could be RX 7 LOL
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
07-29-2005, 02:58 PM
#622
Registered
Join Date: Dec 2003
Location: Orlando, FL
Posts: 1,223
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RX8-TX
Aussies are weird, they claim they can cram 8 passengers in their RX!!! :D :D :D
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
"Defect Details: There is a possibility for excessive thermal heat to build up around the exhaust system."
07-29-2005, 03:06 PM
#623
Originally Posted by loco4rx8
Well, when you put it like that, zoom44. I believe I will send them a letter. I tend to get a better response that way. I'll just tell them that I don't believe I should've been charged for the recall work and I'd like a thorough explanation of why they felt they had to remove the exhaust to perform the work and why I had to pay for it.
Thank you all for the info.
Thank you all for the info.
07-29-2005, 05:01 PM
#624
Here is my story so far - Went in for the 30K service, and asked if they were ready for the recalls. They said they did not have all the parts yet. So while up on the lift, we did the inspection of all the parts, and we did not find anything that was damaged from heat. Not one little stinkin' item. Maybe my complete exhaust mods helped. We also checked the control arms, and they looked fine to the naked eye, but you need a scope to see the hairlines I bet - right Charlie . The Master Tech took my car out for a spin with all my mods, and came back with a big 'ole grin on his face. He liked the it.
I'm back on the street, and we need to go back for the recalls once they are setup. They did get parts to do their entire inventory of new cars so they could sell them.
Hope everyone else has my luck
. The Master Tech took my car out for a spin with all my mods, and came back with a big 'ole grin on his face. He liked the it. I'm back on the street, and we need to go back for the recalls once they are setup. They did get parts to do their entire inventory of new cars so they could sell them.
Hope everyone else has my luck
Last edited by Nemesis8; 07-29-2005 at 05:54 PM.
07-29-2005, 05:09 PM
#625
Administrator
kevin has your car sat still at 2500 rpm for ten minutes ever? hence no damage. it doesnt have anything to do with stop and go traffic. i have said that many times now.
the ball joint cracks that could cause the control arm to fail cant be seen by human eyes. you need x rays or sonics etc. when you see it it would have already failed.
the ball joint cracks that could cause the control arm to fail cant be seen by human eyes. you need x rays or sonics etc. when you see it it would have already failed.