Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

RECALL THREAD/MNAO suspend RX-8 deliveries.

Old Jul 27, 2005 | 08:04 PM
  #601  
expo1's Avatar
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 3
From: Manchester, NJ
Originally Posted by thew
my guess is they checked your 8 for the defective lower A arm ball joint . If it had the right Part number then your ok and they let you go.. as of yet there not doing any gas tank stuff untill they Mail you out the Notice from Mazda.. You are lucky they did not try to hold your 8 untill they had the gas tank parts ..
Nope, scroll up to post # 601 I have a pic of the invoice they did the gas tank recall 3305G
Reply
Old Jul 27, 2005 | 08:05 PM
  #602  
thew's Avatar
Thews8
 
Joined: Apr 2004
Posts: 2,535
Likes: 11
From: Oregon South Coast
That is Crazy.. your Exhaust comes of just like the OEM unit except is easyer to remove than Stock.. They can't charge you to remove anything at all for a Recall inspection.. You need to make them give you your money back.. Thats not right at all !!!
Originally Posted by loco4rx8
I also got the 3305G recall taken care of today when I took the car in for its 40k service. It's a Group 1 car. I didn't mention the recalls, they took care of it themselves. I'll still have to take it back for the other recall, but I'm glad to get this one taken care of.

Incidentally, I talked to the tech who did the work, and he said he saw no heat damage to my car.

Oh, and I haven't noticed any difference so far since moving up to the 'R' flash. I don't know if it was supposed to make any differences to normal driveability or not. I got the 'N' flash at the beginning of May and my MPG went up over 1mpg since then. I hope 'R' doesn't screw that up somehow. I will keep an eye on it.


Edited to Add:
I should point out that my dealer gave me just a little trouble about my aftermarket (Borla) exhaust. I had to pay them for the hour of labor to drop the exhaust to do the recall work. They told me they'd "look the other way" on the aftermarket part if I paid the labor. I felt like that was kind of lame and baseless, but I wasn't in the mood to fight with them over $40 so I just paid it.

Just wanted to say that in case anyone else is concerned about their aftermarket exhaust. I'm wondering if my dealer is the only one who has bitched about it.
Reply
Old Jul 27, 2005 | 08:06 PM
  #603  
loco4rx8's Avatar
BSG 75
 
Joined: Jul 2003
Posts: 869
Likes: 0
From: Virginia
I will look tomorrow when it's daylight again, but I doubt I'd be able to get a decent pic. I have no way of lifting the car. But I will look.

There is no campaign sticker under the hood or in either door jamb. I didn't look anywhere else but I can't imagine where else they'd put it.... weird.

I don't know how long it took them for sure because I left the car there, but it couldn't have been longer than two hours because they called me to verify whether I'd pay the labor cost before doing the work and then called back two hours later after it was done.
Reply
Old Jul 27, 2005 | 08:08 PM
  #604  
loco4rx8's Avatar
BSG 75
 
Joined: Jul 2003
Posts: 869
Likes: 0
From: Virginia
Originally Posted by thew
That is Crazy.. your Exhaust comes of just like the OEM unit except is easyer to remove than Stock.. They can't charge you to remove anything at all for a Recall inspection.. You need to make them give you your money back.. Thats not right at all !!!

You know, I said the exact same thing and I started to argue with him and then I just sat back and decided it wasn't worth the $40 to make a stink about it. He didn't seem inclined to budge so I backed off. If it had been a several hundred dollar charge, I would've fought it for sure.
Reply
Old Jul 27, 2005 | 08:09 PM
  #605  
RX8-TX's Avatar
Senior Geek
 
Joined: Aug 2003
Posts: 1,005
Likes: 0
From: Richardson, TX
Originally Posted by expo1
Nope, scroll up to post # 601 I have a pic of the invoice they did the gas tank recall 3305G
Funny thing is, the invoice says YOU told them about the recall as a "concern". And unless I am going completely blind, it doesn't mention anything about an actual recall procedure being done on your car.

Last edited by RX8-TX; Jul 27, 2005 at 08:14 PM.
Reply
Old Jul 27, 2005 | 08:09 PM
  #606  
zoom44's Avatar
Administrator
 
Joined: Jul 2002
Posts: 21,958
Likes: 115
From: portland oregon
Originally Posted by thew
my guess is they checked your 8 for the defective lower A arm ball joint . If it had the right Part number then your ok and they let you go.. as of yet there not doing any gas tank stuff untill they Mail you out the Notice from Mazda.. You are lucky they did not try to hold your 8 untill they had the gas tank parts ..

no they didnt the recall number they put on his paperwork is for the thermal issue.
Reply
Old Jul 27, 2005 | 08:16 PM
  #607  
zoom44's Avatar
Administrator
 
Joined: Jul 2002
Posts: 21,958
Likes: 115
From: portland oregon
Originally Posted by RX8-TX
Funny thing is, the invoice says YOU told them about the recall as a "concern". And unless I am going completely blind, it doesn't mention anything about an actual recall procedure being done on your car.

i have it on good authority that they "closed" the issue in the system
Reply
Old Jul 27, 2005 | 08:20 PM
  #608  
RX8-TX's Avatar
Senior Geek
 
Joined: Aug 2003
Posts: 1,005
Likes: 0
From: Richardson, TX
Originally Posted by zoom44
i have it on good authority that they "closed" the issue in the system
Times like this I need the right smiley [scratching my head....]
Reply
Old Jul 27, 2005 | 08:28 PM
  #609  
Gomez's Avatar
Thread Starter
Shifty Bastard.
 
Joined: Feb 2004
Posts: 4,835
Likes: 0
From: Melbourne, Australia.
Originally Posted by expo1
..... But I have a feeling all the recall procedures were not followed.
Seems like it, doesn't it? They have invoiced Mazda .6 hrs (which is the Group 2 recall period). Your car is obviously Group 1. It's worth asking the question.
Reply
Old Jul 27, 2005 | 08:30 PM
  #610  
zoom44's Avatar
Administrator
 
Joined: Jul 2002
Posts: 21,958
Likes: 115
From: portland oregon
i believe they followed group 2 instructions for the group one car. if so that could cause them major pains. i am inquiring furthur.
Reply
Old Jul 27, 2005 | 08:36 PM
  #611  
Gomez's Avatar
Thread Starter
Shifty Bastard.
 
Joined: Feb 2004
Posts: 4,835
Likes: 0
From: Melbourne, Australia.
Originally Posted by thew
That is Crazy.. your Exhaust comes of just like the OEM unit except is easyer to remove than Stock.. They can't charge you to remove anything at all for a Recall inspection.. You need to make them give you your money back.. Thats not right at all !!!
Even crazier is the fact that there are no reference to exhaust removal in the recall procedure. Does the Borla make inspection of the grommets impossible? I wouldn't have thought so....it's still easy to spot them with my Hymee exhaust.
Reply
Old Jul 27, 2005 | 08:39 PM
  #612  
loco4rx8's Avatar
BSG 75
 
Joined: Jul 2003
Posts: 869
Likes: 0
From: Virginia
Do you have to remove the exhaust to get to the fuel tank? I don't know - I'm just guessing here. I'm really not very knowledgeable about this stuff.
Reply
Old Jul 27, 2005 | 08:41 PM
  #613  
Gomez's Avatar
Thread Starter
Shifty Bastard.
 
Joined: Feb 2004
Posts: 4,835
Likes: 0
From: Melbourne, Australia.
Originally Posted by RX8-TX
Funny thing is, the invoice says YOU told them about the recall as a "concern". And unless I am going completely blind, it doesn't mention anything about an actual recall procedure being done on your car.
It sorta does, it's just not in plain view! The operation code of XXB072R2 is the labor code for this recall.
Reply
Old Jul 27, 2005 | 08:45 PM
  #614  
Gomez's Avatar
Thread Starter
Shifty Bastard.
 
Joined: Feb 2004
Posts: 4,835
Likes: 0
From: Melbourne, Australia.
Originally Posted by loco4rx8
Do you have to remove the exhaust to get to the fuel tank? I don't know - I'm just guessing here. I'm really not very knowledgeable about this stuff.
They're not required to remove the tank....just lower the leading edge of it. No need to remove the exhaust for that.
Reply
Old Jul 27, 2005 | 08:53 PM
  #615  
zoom44's Avatar
Administrator
 
Joined: Jul 2002
Posts: 21,958
Likes: 115
From: portland oregon
loco you should not have been asked to pay . go talk to teh GM of the place. get your money back plus. thats ridiculous.
Reply
Old Jul 27, 2005 | 09:04 PM
  #616  
loco4rx8's Avatar
BSG 75
 
Joined: Jul 2003
Posts: 869
Likes: 0
From: Virginia
Well, when you put it like that, zoom44. I believe I will send them a letter. I tend to get a better response that way. I'll just tell them that I don't believe I should've been charged for the recall work and I'd like a thorough explanation of why they felt they had to remove the exhaust to perform the work and why I had to pay for it.

Thank you all for the info.
Reply
Old Jul 28, 2005 | 01:52 AM
  #617  
sco's Avatar
sco
Registered
 
Joined: Aug 2003
Posts: 1,459
Likes: 0
From: Brisbane, Australia
Recall is out in Australia too:
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
http://www.recalls.gov.au/view_recal..._ID_Auto=13528
Reply
Old Jul 28, 2005 | 02:01 AM
  #618  
Lschiavo's Avatar
05 Champ Car Test Driver
 
Joined: Jul 2004
Posts: 385
Likes: 0
From: Calgary, AB - Canada
Mazda RX ??? It could be RX 7 LOL
Reply
Old Jul 28, 2005 | 04:39 AM
  #619  
Gomez's Avatar
Thread Starter
Shifty Bastard.
 
Joined: Feb 2004
Posts: 4,835
Likes: 0
From: Melbourne, Australia.
Yep...we got both. I dodged the lower control arm one . I have L4 and MQ lower control arms....
Reply
Old Jul 29, 2005 | 10:43 AM
  #620  
zoom44's Avatar
Administrator
 
Joined: Jul 2002
Posts: 21,958
Likes: 115
From: portland oregon
expo- this is what was on the invoice of another member fore the work done

Originally Posted by unpocoloco
Work I had done:
* Full Circle Vehicle Checkup
* Recall 3305G: R-8 Thermal Damage
1 Pad, INsulator
Inspected Fuel Tank and other locatios for damage
Installed foam pad on fuel tank
Reflashed PCM with latest
* Oil change & 3000 Mile Interval Service
* Latch fixed

your invoice should have looked like that
Reply
Old Jul 29, 2005 | 11:50 AM
  #621  
RX8-TX's Avatar
Senior Geek
 
Joined: Aug 2003
Posts: 1,005
Likes: 0
From: Richardson, TX
Originally Posted by Lschiavo
Mazda RX ??? It could be RX 7 LOL
Aussies are weird, they claim they can cram 8 passengers in their RX!!! :D :D :D
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
Reply
Old Jul 29, 2005 | 02:58 PM
  #622  
beachdog's Avatar
Registered
 
Joined: Dec 2003
Posts: 1,223
Likes: 0
From: Orlando, FL
Originally Posted by RX8-TX
Aussies are weird, they claim they can cram 8 passengers in their RX!!! :D :D :D
http://www.recalls.gov.au/view_recal..._ID_Auto=13527
I also like the reference to "thermal heat". Somewhat redundantly redundant.

"Defect Details: There is a possibility for excessive thermal heat to build up around the exhaust system."
Reply
Old Jul 29, 2005 | 03:06 PM
  #623  
8is>enuff's Avatar
Bland
 
Joined: Apr 2004
Posts: 856
Likes: 1
From: New Jersey
Originally Posted by loco4rx8
Well, when you put it like that, zoom44. I believe I will send them a letter. I tend to get a better response that way. I'll just tell them that I don't believe I should've been charged for the recall work and I'd like a thorough explanation of why they felt they had to remove the exhaust to perform the work and why I had to pay for it.

Thank you all for the info.
Can't wait for their reply
Reply
Old Jul 29, 2005 | 05:01 PM
  #624  
Nemesis8's Avatar
Bigus Rotus
iTrader: (3)
 
Joined: Jun 2004
Posts: 8,573
Likes: 1
From: Missouri
Here is my story so far - Went in for the 30K service, and asked if they were ready for the recalls. They said they did not have all the parts yet. So while up on the lift, we did the inspection of all the parts, and we did not find anything that was damaged from heat. Not one little stinkin' item. Maybe my complete exhaust mods helped. We also checked the control arms, and they looked fine to the naked eye, but you need a scope to see the hairlines I bet - right Charlie . The Master Tech took my car out for a spin with all my mods, and came back with a big 'ole grin on his face. He liked the it.

I'm back on the street, and we need to go back for the recalls once they are setup. They did get parts to do their entire inventory of new cars so they could sell them.

Hope everyone else has my luck

Last edited by Nemesis8; Jul 29, 2005 at 05:54 PM.
Reply
Old Jul 29, 2005 | 05:09 PM
  #625  
zoom44's Avatar
Administrator
 
Joined: Jul 2002
Posts: 21,958
Likes: 115
From: portland oregon
kevin has your car sat still at 2500 rpm for ten minutes ever? hence no damage. it doesnt have anything to do with stop and go traffic. i have said that many times now.

the ball joint cracks that could cause the control arm to fail cant be seen by human eyes. you need x rays or sonics etc. when you see it it would have already failed.
Reply

Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 08:33 AM.