16X Engine – Possible Technology Applications
03-27-2009, 12:35 PM
#51
Registered User
Join Date: Jan 2009
Location: Aurora, IL
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Found some detailed information on changes that come with this new engine
http://www.mazda.com/mazdaspirit/rotary/16x/
http://www.mazda.com/mazdaspirit/rotary/16x/
04-04-2009, 05:08 PM
#54
Certified Mazda Tech
found the info i was looking for on the 09's 13b compared to the 08's (in the oil department). See attached specs below.
The oil pump was changed as well as a number of other smaller improvements.
kevin.
The oil pump was changed as well as a number of other smaller improvements.
kevin.
Last edited by teknics; 04-04-2009 at 05:36 PM.
04-04-2009, 05:30 PM
#55
Super Moderator
04-04-2009, 05:38 PM
#56
Certified Mazda Tech
We should team up and diagram the entire technical side of the rx8's, with your EPC and my documentation/contacts we could literally dissect the whole car thru posts/topics.
kevin.
Last edited by teknics; 04-04-2009 at 05:42 PM.
04-10-2009, 10:18 PM
#57
Super Moderator
you should have a mod go thru that topic and trim it down to only new info about the '09 rx8...it would be much better, too much new info is brought up in midst of normal conversation.
We should team up and diagram the entire technical side of the rx8's, with your EPC and my documentation/contacts we could literally dissect the whole car thru posts/topics.
kevin.
We should team up and diagram the entire technical side of the rx8's, with your EPC and my documentation/contacts we could literally dissect the whole car thru posts/topics.
kevin.
Sorry about the late reply...
Yes I am willing to give it a go, provided the Mods here believe it is "worthy" and "sticky it ", not much point in doing all the work to let it fade away".
I have a US 09 WS Manual in Paper (about 7 inches thick), I can only scan and then have to resize...a lot of work and time!?..
Have the 09 Service Highlights in PDF also thanks to a dedicated Mazda man somewhere in the Universe..
Ash
04-11-2009, 07:19 AM
#59
I don't buy Kool-Aid
This is the Oil Pressure Regulator (3648-14-250) Shown here on the 2003 S1 RENESIS which screws into the bottom internal Rear Iron Housing like ALL other previous Rotaries..
As I said the S2 RENESIS no longer has this separate Valve...well I can not find one...all I can find is an oil pressure SWITCH located on one of the EMOP's which obviously monitors (makes sure) there is oil pressure/oil available for the two EMOP's use.
As I said the S2 RENESIS no longer has this separate Valve...well I can not find one...all I can find is an oil pressure SWITCH located on one of the EMOP's which obviously monitors (makes sure) there is oil pressure/oil available for the two EMOP's use.
Thanks,
-Gil
Thread
Thread Starter
Forum
Replies
Last Post
Sifu
RX-8 Parts For Sale/Wanted
3
08-30-2015 10:51 PM
