Pettit Super Charger Owners
03-24-2008, 09:25 PM
#1653
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Blinking numbers = Boost readings
Here is an 8.5 psi vid
http://www.youtube.com/watch?v=7lnJXHa6Wd8
03-24-2008, 09:34 PM
#1657
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
But wait, now I got new coilovers and G-games 77W wheels...oh I almost forgot
My car is hooked on meth and I'm its biggest supplier.
Last edited by marsredr100; 03-24-2008 at 10:10 PM.
03-24-2008, 10:13 PM
#1659
What does the eyetwitch mean when people use it?
Thanks Juan. Phil has been having issues with his boost readings so I bought him another sensor that I intend on remote locating like you have. I'll also verify the electrical integrity of his gauge system.
Thanks Juan. Phil has been having issues with his boost readings so I bought him another sensor that I intend on remote locating like you have. I'll also verify the electrical integrity of his gauge system.
03-25-2008, 07:25 AM
#1661
Registered
Meth location question....
I see the Methanol hose in the photo, it looks like you are running the methanol to the vacuum/boost side of the intake.
Are you running the "extra/upgraded" solenoid to stop siphon of Methanol into the intake ?
Last edited by Rote8; 03-25-2008 at 07:41 AM.
03-25-2008, 08:18 AM
#1663
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
I see the Methanol hose in the photo, it looks like you are running the methanol to the vacuum/boost side of the intake.
Are you running the "extra/upgraded" solenoid to stop siphon of Methanol into the intake ?
Are you running the "extra/upgraded" solenoid to stop siphon of Methanol into the intake ?
03-25-2008, 08:19 AM
#1664
Smart *** You must be taking lessons from CRH. Presently my boost sensor is mounted in the intake manifold and that's were your picture looks like it is mounted in yours. Rays post suggests another location - I'm confused.
You must be taking lessons from CRH. Presently my boost sensor is mounted in the intake manifold and that's were your picture looks like it is mounted in yours. Rays post suggests another location - I'm confused.
03-25-2008, 08:45 AM
#1665
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
See below pictures of my vacuum/boost gauge kit and closeup of the sensor (sending unit).
Last edited by marsredr100; 03-25-2008 at 08:54 AM.
03-25-2008, 09:22 AM
#1668
Errr, what you saw on the picture is just the nipple/bung for the vacuum/boost hose. The actual sensor is inside the car. Phil, I think you are a bit confused about the sensor/bung location. Its OK, I get like that after staring at your avatar for a while.
See below pictures of my vacuum/boost gauge kit and closeup of the sensor (sending unit).
See below pictures of my vacuum/boost gauge kit and closeup of the sensor (sending unit).
- told you I must be dense,
i thought it was hooked to the sensor as mine is hooked up only about 4" off the bung. Sorry I thought you were having a CRH moment with me. Yours would be several feet between the hook up and the sensor with it being inside the vehicle.
That's why I bought him another sensor.
03-25-2008, 09:34 AM
#1670
I took him too literal and thought when he said below the gauge he was talking about me. You would do something like that and I apologized to him. Yes we did talk about a remote site but not where. Oh well back into my corner.
03-25-2008, 09:44 AM
#1671
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
OK, that's it. I had it with you guys and this forum. 
I'm selling my RX8 and going to buy one of this:
http://www.ronpatrickstuff.com/
Just kidding.
I'm selling my RX8 and going to buy one of this:
http://www.ronpatrickstuff.com/
Just kidding.
Last edited by marsredr100; 03-25-2008 at 10:09 AM.
