Pettit Super Charger Owners
Supercharged by Pettit
iTrader: (5)
I was over at Moon's this weekend with Greg, and I saw some really awesome work. Moons working on a kit with a bigger blower. And from the looks of it; its going to be awesome. It will be more powerful, run more efficiently, and be more asthetically pleasing to the eye. Something definitely to look out for.
Btw slvrstreak thanks for the seal and spacer. It got there the same day we started working on the car. Talk about good timing.
Also does anyone have 1. SC main pulley 2. Low PSI crank pulley that they can lend me, so I can have replicas made? Pettit no longer has them in stock and it seems Cam Jr is having trouble finding the schematics.
Last edited by NYC Drift King; 05-14-2013 at 07:38 PM.
Angler of the Year
iTrader: (3)
that's great Omar...glad I could help
the SC pulleys are a common size...can't remember what sizes exactly but, I ordered a few from advance auto and may even have an extra
the SC pulleys are a common size...can't remember what sizes exactly but, I ordered a few from advance auto and may even have an extra
Supercharged by Pettit
iTrader: (5)
Yo def saved me. The shaft spacer I had was the wrong size fml... And please once again if you can help with the pulleys it would be nothing short of amazing.
Supercharged by Pettit
iTrader: (5)
Supercharged by Pettit
iTrader: (5)
oh lol.... I have the belt lolol.... I need the actual Pulleys. The Main SC pulley and the Crank pulley.
Because the Main SC pulley I have is a lot smaller than the one that made it to production. And my Crank one has welds, so its un balanced.
I want to have replicas made of the originals.
Because the Main SC pulley I have is a lot smaller than the one that made it to production. And my Crank one has welds, so its un balanced.
I want to have replicas made of the originals.
Angler of the Year
iTrader: (3)
oh I see
reading comp fail lol
I don't have an extra pulley
if I swap to the high boost setup in the near future I will let you know though
reading comp fail lol
I don't have an extra pulley
if I swap to the high boost setup in the near future I will let you know though
FULLY SEMI AUTOMATIC
iTrader: (9)
nyc pm keck03 iirc he has different pullies for his car. ill send him a txt too
FULLY SEMI AUTOMATIC
iTrader: (9)
i just talked to mike. hes running the 11psi pulley but he does have the 8 also. he needs to replace his belts this sunday tho. his car has been in his garage for the past week.
Registered
iTrader: (3)
It was time to pass the torch guys. Levi has righteous plans for my car ( now HIS car!)
Putting cage in and proper seats/safety equipment
loosing 200-300 lbs
lightweight battery
bigger injectors
I am trying to talk him into getting the S2 differential--I dont think he realizes how big of a performance boost that would give him
He is going to need a bigger oil cooler too
I cant wait to take a ride in it when it is finished. It is going to be one to watch--that is for sure.
Putting cage in and proper seats/safety equipment
loosing 200-300 lbs
lightweight battery
bigger injectors
I am trying to talk him into getting the S2 differential--I dont think he realizes how big of a performance boost that would give him
He is going to need a bigger oil cooler too
I cant wait to take a ride in it when it is finished. It is going to be one to watch--that is for sure.
Supercharged by Pettit
iTrader: (5)
Supercharged by Pettit
iTrader: (5)
So did some digging up and found the SC Pulley sizes for future references. So if somebody does a search hopefully this post pops up.
https://www.rx8club.com/series-i-maj...8/#post2745704
https://www.rx8club.com/series-i-maj...8/#post2745704
You would think common knowledge. But for SC noobs not so much. Well for the Main SC pulley not so much common knowledge. Whatever though It might help someone else later on.
https://www.rx8club.com/series-i-maj...8/#post2745704
https://www.rx8club.com/series-i-maj...8/#post2745704
You would think common knowledge. But for SC noobs not so much. Well for the Main SC pulley not so much common knowledge. Whatever though It might help someone else later on.
Supercharged by Pettit
iTrader: (5)
Supercharged by Pettit
iTrader: (5)
So now with my set up; my top pulley is .30 inches smaller than the original. Does anybody have a idea of how much boost I may see in comparison with the Pettit High boost setup?
Supercharged by Pettit
iTrader: (5)
Cool. Seems to be very difficult to get pulleys for this kit. So I think I'm going to upgrade to larger injectors, upgrade my ignition and run the higher boost. All with in a week. Still looking to replace my welded up low boost crank pulley for another one that made it to production.