Pettit Super Charger Owners
#2877
I've been expecting to hear from Munche 187 and realized that I haven't even seen a post from him lately. He was supposed to come to Vegas. I must have pissed him off somehow (easy for me)or maybe he did not come after-all. Has anyone heard from him?
#2878
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Just FYI from a good friend of mine's NA RX8 and the one responsible for purchasing my RX8 after years of hesitation. Also, see what a “Professional” AP tuner can accomplish.
https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/dyno-gotham-racing-tuned-accessport-racing-beat-parts-153312/
https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/dyno-gotham-racing-tuned-accessport-racing-beat-parts-153312/
#2879
DEVILMAN
iTrader: (1)
Just FYI from a good friend of mine's NA RX8 and the one responsible for purchasing my RX8 after years of hesitation. Also, see what a “Professional” AP tuner can accomplish.
https://www.rx8club.com/showthread.php?t=153312
https://www.rx8club.com/showthread.php?t=153312
#2882
DEVILMAN
iTrader: (1)
#2884
WENTGERMAN
iTrader: (6)
The best thing to do is go to www.pettitracing.com, send them an email, and see what kind of deal they have to offer you. Nice sig btw.
#2885
Registered
It has come to my attention that MM and I did not understand each other on IAT readings. My Intake Air Temp readings are from the (boost) side of the intake manifold, not from the MAF, this may explain some strange readings on both of our parts.
My IAT gauge is screwed into the Pettit upper intake manifold, and yes, I do get below ambient readings of the boosted intake charge when running methanol.
My IAT gauge is screwed into the Pettit upper intake manifold, and yes, I do get below ambient readings of the boosted intake charge when running methanol.
#2886
Registered
#2887
Banned
iTrader: (3)
Just FYI from a good friend of mine's NA RX8 and the one responsible for purchasing my RX8 after years of hesitation. Also, see what a “Professional” AP tuner can accomplish.
https://www.rx8club.com/showthread.php?t=153312
https://www.rx8club.com/showthread.php?t=153312
With intake, ignition and exhaust (and hands-on tuning), we're starting to see cars break the 210 line regularly.
With a fresh motor and a header, I've been pulling cars into the 220s lately.
#2888
Banned
iTrader: (3)
It has come to my attention that MM and I did not understand each other on IAT readings. My Intake Air Temp readings are from the (boost) side of the intake manifold, not from the MAF, this may explain some strange readings on both of our parts.
My IAT gauge is screwed into the Pettit upper intake manifold, and yes, I do get below ambient readings of the boosted intake charge when running methanol.
My IAT gauge is screwed into the Pettit upper intake manifold, and yes, I do get below ambient readings of the boosted intake charge when running methanol.
EDIT - Never mind. Its back a page.
How are the readings strange? I told you what was going on. You just "discovered" where your IAT sensor is?
That was my whole point - that the air coming down the pike from the turbo is already cool before the water/meth.
Last edited by MazdaManiac; 08-12-2008 at 03:32 PM.
#2889
Registered
iTrader: (3)
i have found a way to be able to use a barrel type 180F thermostat. Works well and with the other cooling mods i have done--the car is MUCH cooler now---much. A good faith guesstimate would be in the 20F degrees range. It does take a little longer to warm up--but not much. I have not been able to go on track with this set up yet and it will be a while before I will. I have to save some mula to buy some 275/40/18 r compunds to go on my newly aquired 18 x 9.5 x 18 RPF 1's!!! Now I can finally get enough rubber on the road to match the power increase.
If anyone is interested in the thermostat thing then just PM me.
olddragger
If anyone is interested in the thermostat thing then just PM me.
olddragger
#2891
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
My intercooler reservoir is bigger than yours….ha!
Purchase a Snow Performance 3 quarts reservoir and two nylon 5/8 L shape fittings from Home Depot. Drill top right corner of bottle and enlarge bottom hole of bottle in order to fit the nylon fitting. Super glue the fittings to hold in place and later spread some Goop to seal the fitting to the bottle. Optional: Purchase thin insulation tape from Home Depot and cover the outside of the bottle with it. Hold the insulation with aluminum tape. You will also have to change the bottom 90-degree hose for a longer one. See picture to compare. I use the same four bolts (same bolt pattern) I had with my old bottle to hold in place instead of plastic straps for a better hold and looks. The new bottle bottom output hole eliminates the possibilities of fluid circulation due to lower fitting of the pump in relation to the fluid level in the reservoir.
Also, I’m using a 25/75 methanol/water mixture this time and will report my findings later. I just got done with the mod and temps are in the 70s due to rainy conditions in the area.
Purchase a Snow Performance 3 quarts reservoir and two nylon 5/8 L shape fittings from Home Depot. Drill top right corner of bottle and enlarge bottom hole of bottle in order to fit the nylon fitting. Super glue the fittings to hold in place and later spread some Goop to seal the fitting to the bottle. Optional: Purchase thin insulation tape from Home Depot and cover the outside of the bottle with it. Hold the insulation with aluminum tape. You will also have to change the bottom 90-degree hose for a longer one. See picture to compare. I use the same four bolts (same bolt pattern) I had with my old bottle to hold in place instead of plastic straps for a better hold and looks. The new bottle bottom output hole eliminates the possibilities of fluid circulation due to lower fitting of the pump in relation to the fluid level in the reservoir.
Also, I’m using a 25/75 methanol/water mixture this time and will report my findings later. I just got done with the mod and temps are in the 70s due to rainy conditions in the area.
#2894
Registered
Which convo are you clearing up, because I don't remember.
EDIT - Never mind. Its back a page.
How are the readings strange? I told you what was going on. You just "discovered" where your IAT sensor is?
That was my whole point - that the air coming down the pike from the turbo is already cool before the water/meth.
EDIT - Never mind. Its back a page.
How are the readings strange? I told you what was going on. You just "discovered" where your IAT sensor is?
That was my whole point - that the air coming down the pike from the turbo is already cool before the water/meth.
No, I just discovered you were reading the MAF, not a calibrated gauge.
#2896
Registered
iTrader: (3)
Great work Juan.
Do yall think we may need to move the resorvoir out of the engine bay?
As soon as a am through with this thermostat thing, i will be looking at that.
I didnt think about the snow bottle---great idea!
Is this pump we have more of a pusher or is it a puller?
olddragger
Do yall think we may need to move the resorvoir out of the engine bay?
As soon as a am through with this thermostat thing, i will be looking at that.
I didnt think about the snow bottle---great idea!
Is this pump we have more of a pusher or is it a puller?
olddragger
#2897
Registered
Great work Juan.
Do yall think we may need to move the resorvoir out of the engine bay?
As soon as a am through with this thermostat thing, i will be looking at that.
I didnt think about the snow bottle---great idea!
Is this pump we have more of a pusher or is it a puller?
olddragger
Do yall think we may need to move the resorvoir out of the engine bay?
As soon as a am through with this thermostat thing, i will be looking at that.
I didnt think about the snow bottle---great idea!
Is this pump we have more of a pusher or is it a puller?
olddragger
PS: Any word on the thermostat change?
#2898
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
I thought about doing that but I’m too lazy to reroute hoses and current setup configuration. This reservoir setup change took less than an hour to make and install (not counting the time for the Goop to dry).
#2900
DEVILMAN
iTrader: (1)
Good stuff OD!
Here's a link for you folks too lazy to search:
https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/i-can-do-180f-thermostat-153806/
Here's a link for you folks too lazy to search:
https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/i-can-do-180f-thermostat-153806/