The Official Overboosted Overlords Club
#601
Registered
Much thanks to all the Overlords dedicated to pushing *knowledge* to facilitate successful boost projects & better RX8 community.
I would be very interested in seeing a alongside each Overlord's details a *date stamp* of miles driven on your FI motor. Can't think of a better way, *given all the variables* to illuminate an important measure of a successful boost.
I would be very interested in seeing a alongside each Overlord's details a *date stamp* of miles driven on your FI motor. Can't think of a better way, *given all the variables* to illuminate an important measure of a successful boost.
#602
Registered Noob
Join Date: Sep 2007
Location: Long Island (Suffolk), NY
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
Much thanks to all the Overlords dedicated to pushing *knowledge* to facilitate successful boost projects & better RX8 community.
I would be very interested in seeing a alongside each Overlord's details a *date stamp* of miles driven on your FI motor. Can't think of a better way, *given all the variables* to illuminate an important measure of a successful boost.
I would be very interested in seeing a alongside each Overlord's details a *date stamp* of miles driven on your FI motor. Can't think of a better way, *given all the variables* to illuminate an important measure of a successful boost.
#604
BDC Motorsports
So Chickenwafer got officially dyno'ed.
I got my misfire issue solved thanks to CRH- I had the wrong terminals on my MSD plug wires. I crimped them down with my needle noses and no more misfire! Schweet.
I ran pretty conservative on the dyno since I don't have a final tune and I was running lean prior. Jeff tweaking the MAF scaling so I was running richer. Boost was only 9-9.8psi.
302-rwhp, 231 ft-lbs torque:
Also had some cut-out at higher rpm thanks to injecting too much water/alky mix. I dialed it down and it feel better. Tony (the guy at the shop/UMS Tuning) said I could have picked up a few more horses if that was dialed back.
All in all I'm pretty happy- conservative tune, low boost, and I'm in the 300-whp club! Next up, more boost, race gas. We'll see...
I got my misfire issue solved thanks to CRH- I had the wrong terminals on my MSD plug wires. I crimped them down with my needle noses and no more misfire! Schweet.
I ran pretty conservative on the dyno since I don't have a final tune and I was running lean prior. Jeff tweaking the MAF scaling so I was running richer. Boost was only 9-9.8psi.
302-rwhp, 231 ft-lbs torque:
Also had some cut-out at higher rpm thanks to injecting too much water/alky mix. I dialed it down and it feel better. Tony (the guy at the shop/UMS Tuning) said I could have picked up a few more horses if that was dialed back.
All in all I'm pretty happy- conservative tune, low boost, and I'm in the 300-whp club! Next up, more boost, race gas. We'll see...
B
#609
BDC Motorsports
#611
Nope
iTrader: (9)
Nice curve wafer. You definately have more power available. I have been waiting to see other dynos on this kit besides the one Jeff posted in the dyno comparo thread.(I am forgetfull and probably forgot if I saw others before). If I were turboed, that is the type of curve I would want to have
What would you recommend as far as the spark advance you mentioned?
So far I am only running 9-10psi, I am going to up it to 13psi and see how it goes. Last time I tried the car ran like a raped ape but it got scary lean in rpm above 4500, so I haven't ventured back into that kind of boost, yet.
Oh yeah, Kane, could you update me on the first page with my numbers and my Custom LS2 Ignition upgrade ?
Thanks
Last edited by chickenwafer; 03-03-2009 at 11:57 PM.
#612
Posting this here in case it gets deleted elsewhere..... call it a mission statement of sorts.
And therein lies the rub. Are you paying for a product or a service? If it is a product then all applicable laws (including warranty or maketability) apply. If you are paying for a service - then why do you care about secrecy... since it cannot be duplicated anyway..... see what I mean?
This whole issue is a huge pet peeve of mine; so I'll not color the thread anymore - but this goes to all tuners who do this kind of copyright secret crap.... copyright protects you from other people making money off of your "written material" not protection from people being able to read you material. Furthermore any kind of scientific type of information should always be made public in order to facilitate UNDERSTANDING. I for one would never spend a dime on a tune that I couldn't see taste touch and ask questions about. If you hire a contractor to build a house - you get to see the bluprints beforehand no?
No way. If he won't let us know who the tuner is, and the maps are locked there is no way in hell he is going to show us the maps to have the handful of people who know enough critique them.
You can either have total transparency or you have to rely on customers who are far more trusting than most or desparate enough to give it a shot regardless. Anway, done posting, still waiting for answers to my questions...
You can either have total transparency or you have to rely on customers who are far more trusting than most or desparate enough to give it a shot regardless. Anway, done posting, still waiting for answers to my questions...
This whole issue is a huge pet peeve of mine; so I'll not color the thread anymore - but this goes to all tuners who do this kind of copyright secret crap.... copyright protects you from other people making money off of your "written material" not protection from people being able to read you material. Furthermore any kind of scientific type of information should always be made public in order to facilitate UNDERSTANDING. I for one would never spend a dime on a tune that I couldn't see taste touch and ask questions about. If you hire a contractor to build a house - you get to see the bluprints beforehand no?
#614
Administrator
iTrader: (7)
never a dull moment at the 8club.
Kane: smart idea, we both know what will happen.
CW: the OGRE putting it down! Nicely done with the 300+ pull. Get some more tuning and lets see what the beast does at 13psi
Kane: smart idea, we both know what will happen.
CW: the OGRE putting it down! Nicely done with the 300+ pull. Get some more tuning and lets see what the beast does at 13psi
#615
To clarify - I am not trying to put Fluid on the spot; my post is directed at anyone and everyone.
Me BS-ing with Ray probably has something to do with it.... LOL; but I am kind of getting a case of the *** with this whole tuning drama. Good tuners are good tuners because they understand how your motor works and how it will respond to changes.... not because of some secret bullshit that you can't know about.
Me BS-ing with Ray probably has something to do with it.... LOL; but I am kind of getting a case of the *** with this whole tuning drama. Good tuners are good tuners because they understand how your motor works and how it will respond to changes.... not because of some secret bullshit that you can't know about.
#617
Life begins @ 30 psi
Join Date: Mar 2008
Location: Columbia, MD
Posts: 1,745
Likes: 0
Received 0 Likes
on
0 Posts
#618
Asshole for hire
iTrader: (1)
Join Date: Jun 2006
Location: Colfontaine, Belgium
Posts: 3,214
Likes: 0
Received 3 Likes
on
3 Posts
wanna see something really interesting check this out https://www.rx8club.com/showpost.php...postcount=5344
#619
Life begins @ 30 psi
Join Date: Mar 2008
Location: Columbia, MD
Posts: 1,745
Likes: 0
Received 0 Likes
on
0 Posts
wanna see something really interesting check this out https://www.rx8club.com/showpost.php...postcount=5344
#625
Former Sponsor
iTrader: (64)
As always the dust will settle and it will be what it will be.
The BHR gang should be supporting this, this would be the demise of Fluid as we all know it if we were to fail....and we all know that this is what they want whether they want to admit it if they want.
Simple as that.
Do you think I am going to let that happen? Absolutely not.
We have close to 12 new product releases in the next few months.
So my guess is I am more than prepared for what Fluid Motorsports is going to be bringing to the Table.
As always thank you for your business and Interest!