Heads up to boosted Snow Performance injection users:

Reply Subscribe

Thread Tools

Rate Thread

Nov 22, 2008 | 01:41 PM

#26

Derex'8

ReDuX

iTrader: (4)

Joined: Oct 2006

Posts: 918

Likes: 0

From: Norfolk, VA

Yeah..Also what needs to be taken into consideration is the sealant on the threads the OP used..It has to compatible w/alky

Nov 22, 2008 | 02:37 PM

#27

Derex'8

ReDuX

iTrader: (4)

Joined: Oct 2006

Posts: 918

Likes: 0

From: Norfolk, VA

Quote:

Originally Posted by Charles R. Hill

Sealant is included in the Snow kits and I am sure others, as well.

Yeah i know was just thinking maybe the OP used sealant other than what was provided..

Nov 22, 2008 | 07:18 PM

#28

Rote8

Thread Starter

Registered

Joined: Oct 2007

Posts: 1,574

Likes: 2

From: Boosted...

Quote:

Originally Posted by 13bturbofc

it sounds like hes talking about the 90 degree elbow that holds the injector and attaches to the hose. but i cant believe that snow would make such a shitty part. possibly its the little plastic piece or "quick release" clip on the elbow. but i cant see how that could blow out..

Yes, exactly.
The guts of the 90 degree elbow ejected completely.

Nov 22, 2008 | 07:26 PM

#29

Rote8

Thread Starter

Registered

Joined: Oct 2007

Posts: 1,574

Likes: 2

From: Boosted...

Quote:

Originally Posted by MazdaManiac

OP - pics or it didn't happen!

I can arrange that:

Last edited by Rote8; Oct 16, 2009 at 05:12 PM.

Nov 22, 2008 | 07:45 PM

#30

13bturbofc

400whp RX-7+05 RX-8=BROKE

Joined: May 2007

Posts: 265

Likes: 0

From: lancaster pa

dude....wtf? whys the outside plastic look so corroded and chewed up? that thing looks like it went through a garbage disposal...lol

Nov 22, 2008 | 08:26 PM

#31

chickenwafer

Nope

iTrader: (9)

Joined: Jan 2007

Posts: 3,312

Likes: 0

From: Denver

I still say you have a poorly manufactured bad apple. There is no way boost pressure did that, it was pump pressure if anything.

Nov 22, 2008 | 09:28 PM

#32

dannobre

Modulated Moderator

iTrader: (3)

Joined: Feb 2004

Posts: 13,720

Likes: 344

From: Smallville

I wouldn't put up to 250 PSI into a push-loc connector...or use plastic line either...

What ever happened to braided steel line and proper brass connectors??

Nov 22, 2008 | 10:19 PM

#33

chickenwafer

Nope

iTrader: (9)

Joined: Jan 2007

Posts: 3,312

Likes: 0

From: Denver

Well the pump ships at 175psi and is adjustable up to 220psi if I remember correctly. I just left mine at 175. The hose is hard (you need to cut it with hedge trimmers practically) and is rated up to 300psi.

Nov 23, 2008 | 05:29 AM

#34

Rote8

Thread Starter

Registered

Joined: Oct 2007

Posts: 1,574

Likes: 2

From: Boosted...

Quote:

Originally Posted by 13bturbofc

dude....wtf? whys the outside plastic look so corroded and chewed up? that thing looks like it went through a garbage disposal...lol

Uh, I was not real happy with it when it broke.
It looks worse now.
I had to dig it out of the bottom of the tool box for the picture.

Nov 23, 2008 | 05:31 AM

#35

Rote8

Thread Starter

Registered

Joined: Oct 2007

Posts: 1,574

Likes: 2

From: Boosted...

Quote:

Originally Posted by chickenwafer

I still say you have a poorly manufactured bad apple. There is no way boost pressure did that, it was pump pressure if anything.

And, assuming you are correct, that is better because?

Nov 23, 2008 | 09:30 AM

#36

Derex'8

ReDuX

iTrader: (4)

Joined: Oct 2006

Posts: 918

Likes: 0

From: Norfolk, VA

Well as stated before and if you look at the pic I posted on the 1st pg they have since upgraded the nozzle and it is of quality build

Nov 23, 2008 | 10:39 AM

#37

WoodsOfGreenRx8

Registered User

Joined: Dec 2006

Posts: 1,015

Likes: 0

From: Omaha

Like mentioned before, Snow re-designed the nozzle. Call them & tell them whats up & they will send you their new design. When I last talked to Snow, they contacted their nozzle supplier & asked if they changed anything, when they said No, Snow dropped them & went a new route. Haven't had any problemds with their new nozzles.