Notices
Series I Major Horsepower Upgrades This is the place to discuss Super Chargers and Turbos, Nitrous, Porting, etc

Best way for HP upgrade?

Old Mar 17, 2010 | 08:22 PM
  #1  
Dave3891's Avatar
Thread Starter
Registered
 
Joined: Feb 2010
Posts: 11
Likes: 0
Question Best way for HP upgrade?

I have had my 2004 8 for about a month now and I have replaced the coils, plugs, wires, gutted the cat, removed and cleaned the SSV valve, sea foamed the engine, so I am running pretty good now and at stock HP.

Now I have been reading lots of posts on different upgrades like headers and intakes, and I am realizing that bolt ons are not going to get my anywhere for horsepower on this engine.

So I am wanting to know what is the most realistic way to get 280 - 300 HP out of this car while still keeping it fairly reliable? Am I going to need to do a engine swap like a older 2 rotor, or a 20b or a LS1? Or will a turbo give me reliable power on the stock engine?

My engine only has 66,000 KM so its pretty new I guess. I am not scared of the fabrication part if it is needed since I have access to a welding/machine shop.

So any comments on the most realistic way to go about getting those numbers would be appreciated.
Reply
Old Mar 17, 2010 | 08:26 PM
  #2  
Mazurfer's Avatar
Surf Hard, Drive Hard
 
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
Covered at nausea.............if you do a search.
Turbo or Supercharger, your choice. Swap.........yes it can be done as well. Couple(many?) of threads on that as well.

Last edited by Mazurfer; Mar 17, 2010 at 08:29 PM.
Reply
Old Mar 17, 2010 | 08:41 PM
  #3  
Dave3891's Avatar
Thread Starter
Registered
 
Joined: Feb 2010
Posts: 11
Likes: 0
Yes, I have done the searches on the topics, and I know that they can be done.

I am just looking for opinions on which is the best way to go.
Reply
Old Mar 17, 2010 | 09:34 PM
  #4  
Silverisk8's Avatar
Registered User
iTrader: (1)
 
Joined: Mar 2010
Posts: 126
Likes: 0
if you want to reach those numbers 280 - 300 hp get a SC or Turbo or do a swap

N/A renesis engine with the best upgrades won't reach those numbers at all
Reply
Old Mar 17, 2010 | 09:37 PM
  #5  
Mazurfer's Avatar
Surf Hard, Drive Hard
 
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
Hopefully nobody is going to let this degrade into another SC vs. Turbo thread.
It's a personal choice and the best you can do is weigh the pros and cons of each and make the decision for yourself. Sorry but it is what it is.
Reply
Old Mar 17, 2010 | 09:41 PM
  #6  
Easy_E1's Avatar
Registered
iTrader: (2)
 
Joined: Sep 2005
Posts: 7,675
Likes: 5
From: Bellevue WA
^I concur. You make the choice because all it's gonna do is start the great debate.
Reply
Old Mar 17, 2010 | 09:43 PM
  #7  
ZumnRx8's Avatar
RX8 & RX7 owner
 
Joined: Mar 2008
Posts: 5,172
Likes: 3
From: So. California
Turbo and Rotaries are like Peanut Butter and Jelly... Need I say more? Each is delicous on toasted bread, however if you put both together. You have a sandwich which in some cases can deliver the same satisfaction as SEX (especially when you cut it in half and dunk it into a glass of milk and then enjoy )
Reply
Old Mar 17, 2010 | 09:50 PM
  #8  
Brettus's Avatar
Boosted Kiwi
iTrader: (2)
 
Joined: Apr 2006
Posts: 20,856
Likes: 1,806
From: Y-cat-o NZ
Originally Posted by Easy_E1
^I concur. You make the choice because all it's gonna do is start the great debate.
Collectively , we currently concur
Reply
Old Mar 17, 2010 | 09:53 PM
  #9  
Silverisk8's Avatar
Registered User
iTrader: (1)
 
Joined: Mar 2010
Posts: 126
Likes: 0
hahaaa where the hell this came from hahaa lol omg ... i think those numbers belong to a skyline

Quote:

Originally Posted by Mawnee
I will now be offering my Turbo kit to the public! This kit is capable of producing 900 crank HP. It is possible that I may have at one time in some way perhaps hit these numbers in my own car. I will niether confirm nor deny, nor comment on said numbers. However my kit may or may not, though probably not(though you could get lucky!) contain a turbo capable of these numbers.
Reply
Old Mar 17, 2010 | 09:54 PM
  #10  
Dave3891's Avatar
Thread Starter
Registered
 
Joined: Feb 2010
Posts: 11
Likes: 0
So with a basic turbo kit I would be looking at 6-8psi for that horsepower?
Reply
Old Mar 17, 2010 | 10:02 PM
  #11  
Silverisk8's Avatar
Registered User
iTrader: (1)
 
Joined: Mar 2010
Posts: 126
Likes: 0
that basic turbo can cost basiclly anywhere from $4000 - $5000 depends on the kit and where you get it tuned
Reply
Old Mar 17, 2010 | 10:05 PM
  #12  
Brettus's Avatar
Boosted Kiwi
iTrader: (2)
 
Joined: Apr 2006
Posts: 20,856
Likes: 1,806
From: Y-cat-o NZ
Originally Posted by Silverisk8
hahaaa where the hell this came from hahaa lol omg ... i think those numbers belong to a skyline
.

For your further amusement - here is the whole quote .
Originally Posted by Mawnee
..............

I will now be offering my Turbo kit to the public!

This kit is capable of producing 900 crank HP. That is over 700HP at the wheels. However, getting there will require major upgrades to other areas of the drivetrain, including but not limited to fuel injectors, ignition coils, intake and exhaust piping, fuel pump, ported housings, extra rotors, a different turbo, cooling system upgrades, transmission upgrades, an LS1 swap, differential upgrades and suspension.
It is not an unrealistic expectation to get well into the 250+ HP* range without serious modification with this kit.

It is possible that I may have at one time in some way perhaps hit these numbers in my own car. I will niether confirm nor deny, nor comment on said numbers. However my kit may or may not, though probably not(though you could get lucky!) contain a turbo capable of these numbers.

To place an order simply go to my website. I will gladly assist you. If you have not recieved your order within 8 years please contact me by cheerokee smoke signal while holding your left hand behind your back. Any other forms of communication will be ignored. I cannot be responsible for unexpected winds blocking your signals.


For what context it came from read this thread :

https://www.rx8club.com/showthread.p...12#post3331812
Reply
Old Mar 17, 2010 | 10:12 PM
  #13  
Silverisk8's Avatar
Registered User
iTrader: (1)
 
Joined: Mar 2010
Posts: 126
Likes: 0
awesome Brettus , omg I never thought someone would ever post something like that $hit

lmao awesome ....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hunterkelley24
Series I Engine Tuning Forum
14
Jun 14, 2022 08:32 AM
Quiggs321
New Member Forum
19
Sep 30, 2015 05:34 PM
urbanvoodoo
RX-8 Discussion
2
Sep 30, 2015 12:41 AM
drlubell
RX-8's For Sale/Wanted
0
Sep 26, 2015 11:58 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 08:37 AM.