m4f1050

iTrader: (1)

I hope we are not breaking any rules, welcome back, BTW!

c41250n

iTrader: (5)

im still waiting for jeff to help me with my map!

MazdaManiac

iTrader: (3)

If you have detonation at all times with 11:1 AFRs as you have indicated in your correspondence, you've got bigger problems then your map!

mysql

I haven't heard about the problems. What's the symptoms?

c41250n

iTrader: (5)

so what might be wrong?
i never had that problem with the int-x tho!
as soon as i installed the cobb ap, it happens!

MazdaManiac

iTrader: (3)

So, put back on the Int-X and see if it goes away.

Until you get me some useful data, I can't really suggest anything.
You are running a calibration that is very conservative and working on a dozen or more other cars.

Unless you have something wrong with your installation or you didn't follow the calibration selection instructions, I'm out of ideas.

dannobre

iTrader: (3)

Is it detonating...or missing??

Big difference.....

Mine was missing if it got too rich.....

mysql

part of the problem is that stuff like coils can deteriorate, so if he had dying coils that worked "ok" with the int-x, then as time went on, they went from "ok" to "crap", the fact that he didn't have issues prior might not point him in the correct direction.

m4f1050

iTrader: (1)

+1 to what MM said, try the Int-X again to see if the problem goes away, if it's still doing it with the Int-X then what Mysql could be what's happening.

m4f1050

iTrader: (1)

ECHO ECHo ECho Echo echo...

tdiddy

He doesn't have the Int-X any longer...

MazdaManiac

iTrader: (3)

Ahh.
Is there someone near him that can sit with him a while and "hold his hand" and report back?

m4f1050

iTrader: (1)

I'm on the other side of US.... hehe

MM any update on my turbo?

MazdaManiac

iTrader: (3)

It goes out Wednesday.

m4f1050

iTrader: (1)

WOOHOO!!!!! U da man!!!

MazdaManiac

iTrader: (3)

Sorry its taken so long.
I've got a list of excuses a mile long, but late is late.

m4f1050

iTrader: (1)

Well, It's only 3 days late according to time frame you gave me, don't sweat it.. I do need to re-tune the Interceptor-X right? MAF is what reads the amount of air, not the pressure, correct?

MazdaManiac

iTrader: (3)

You might not need a re-tune. The Int-X is pretty forgiving in boost.
Same goes for the AccessPORT. Once its is tuned, its tuned.

Psychofox

ok, i just went out side and did some datalog, here's what i found.....
I have MM's upgrade turbo..
the car's super lean condition form 4k RPM all the way to 8K RPM... and it actually reach to 15 AFR in 6k RPM !!! did I just damange the engine?
I am running 5v_6b with mazsport dwell setting and tuned by Jeff on socal dyno day.
Here's the graph for 3rd gear pull and excel log file
Jeff, I also emailed you the log i took.

mysql

you usually hear something if things went wrong, and even if you hit massive detonation it might not damage anything. I have 4 under my belt and the engine is still putting out normal compression results.

how were your numbers before the dwell changes?

MazdaManiac

iTrader: (3)

So, what changed since I left there?

Psychofox

I think you were trying to lean out the AFR in the upper RPM that day becuase the car misfired like crazy.We didn't know it was caused by the dwell setting..

i put a screen in front of the MAF. that's it

Psychofox

before the dwell changing and no screen, i was getting high 10's and the car starts to misfire above 7k rpm..

MazdaManiac

iTrader: (3)

Not quite. You were too rich no matter what. Misfires are misfires. I wouldn't go above my normal tuning range - I tune to the proper AF and then address the next set of issues.

Putting a screen in front of the MAF is a major change.
Its a good change, but its a huge improvement to the sensor's accuracy.

You need to start over with the base calibrations.

tdiddy

What screen material did you use?