TurboXS is seeking a local RX8 owner (MD/VA area)
#101
Originally Posted by RotaryN00b
Excuse me for being retarded... But are those dynos showing 201 whp?
Stockish RX8 (it did have a REVi intake) made 170-180whp. The graph shows the middle of 6 stock runs where it made 177whp. With the catback and catless race pipe installed it made 199-205whp. Middle run was 201whp.
Mark
TurboXS
#102
Originally Posted by PoLaK
Remember guys this isn't a dynojet or a mustang dyno its a dynapack,
Measuring your horsepower depends on whose yardstick you use.
Mustang dyno's get the lowest numbers 140-160 Dynojets are more optimisitic 170-189 and since this is the first dynapack on the forum that i know of i really can't do a comparison, but it would seem to be even more optimisitic than dynojets. ITS JUST A NUMBER not anyway a real world value, tune tool not true statement of what your car puts to the ground
Nathan/Mark do you have a machine to meaure AFR as well?
Measuring your horsepower depends on whose yardstick you use.
Mustang dyno's get the lowest numbers 140-160 Dynojets are more optimisitic 170-189 and since this is the first dynapack on the forum that i know of i really can't do a comparison, but it would seem to be even more optimisitic than dynojets. ITS JUST A NUMBER not anyway a real world value, tune tool not true statement of what your car puts to the ground
Nathan/Mark do you have a machine to meaure AFR as well?
In any case, however, I agree that a dyno is a tuning tool and a tool for measuring relative whp gains. Do not try to compare our absolute numbers to anyone elses. However, you can compare them to other cars on this dyno.
We not only have a wideband, but we make them. We did not hook it up for any of this testing, however. Frankly, until we have a device to control fuelling, there's not a lot of point in measuring what it is. The car was running rich as hell though as evidenced by the backfiring and occasional flame out the tailpipes. We can hook one up on your car if you like when you come in next week.
Mark
TurboXS
#103
Registered
iTrader: (25)
Originally Posted by QBallz
^ That Y-joint is indeed pretty.
it's not really necessary though since the pipe size is staying the same, which cuts the flow in half for each leg, I'm willing to bet that a straight tee in this location won't show any measurable difference on the dyno
#104
Originally Posted by Outlaws eXtreme
Exhaust looks fine, would like to see a side pic if possible of the tips. Or even better, mounted on the car and a back picture of the car.
The Dyno though... hmmm....
The Dyno though... hmmm....
EDIT: Keep in mind the reduction of about 21bs off the stock system
Last edited by Armaant; 12-03-2005 at 12:26 AM.
#105
Son what is your Alibi?
iTrader: (1)
Originally Posted by TurboXS_Mark
Are the whp numbers you quoted above stock RX8 whp numbers? If so, I don't see how you say the Dynapack is "more optimistic" than the dynojet. We made with 171-180whp with a REVi intake on the car.
In any case, however, I agree that a dyno is a tuning tool and a tool for measuring relative whp gains. Do not try to compare our absolute numbers to anyone elses. However, you can compare them to other cars on this dyno.
We not only have a wideband, but we make them. We did not hook it up for any of this testing, however. Frankly, until we have a device to control fuelling, there's not a lot of point in measuring what it is. The car was running rich as hell though as evidenced by the backfiring and occasional flame out the tailpipes. We can hook one up on your car if you like when you come in next week.
Mark
TurboXS
In any case, however, I agree that a dyno is a tuning tool and a tool for measuring relative whp gains. Do not try to compare our absolute numbers to anyone elses. However, you can compare them to other cars on this dyno.
We not only have a wideband, but we make them. We did not hook it up for any of this testing, however. Frankly, until we have a device to control fuelling, there's not a lot of point in measuring what it is. The car was running rich as hell though as evidenced by the backfiring and occasional flame out the tailpipes. We can hook one up on your car if you like when you come in next week.
Mark
TurboXS
Im just curious to see how much the lamdas will get much leaner with the addtion of a racepipe. If its not to much trouble to take the stock one out of the CAT then lets do it, i know that the threads in there might be pretty difficult to get out.
#112
Registered
Originally Posted by TeamRX8
I have a super hi-flo cat converter that will keep it emissions legal without any loss of performance, it will flow virtually equivalent to a straight piece of pipe
.
.
#113
Ok so the car threw a cel. I tried resetting the ecu and the cel came back on. I've gone through the searches and after all the work with finals im to tired to run through the tons of pages to find the fix. Can someone please post what the generally agreed cel fix is and where to get it? I pm'd gtaw in case that one works.
Thanks
Thanks
#114
Registered
iTrader: (25)
Contact forum member "GTAW", this is the only thng I know of that works:
https://www.rx8club.com/series-i-tech-garage-22/midepipe-cel-problem-fixed-72790/
https://www.rx8club.com/series-i-tech-garage-22/midepipe-cel-problem-fixed-72790/
#118
Originally Posted by Moostafa29
Armaant, you are running a midpipe/racepipe right? I think most members running those are getting cels. Its normal.
#119
Registered
iTrader: (25)
Originally Posted by Armaant
did that just making sure that after all the things people have tried thats the one that works...any idea on how much he charges for it?
https://www.rx8club.com/showthread.p...highlight=GTAW
I'm presently waiting for a reply from him on availability/cost
.
edit: $20 + shipping
Last edited by TeamRX8; 12-05-2005 at 05:56 PM.
#122
Storm Trooper
Join Date: May 2004
Location: Freakmont, CA
Posts: 3,908
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Moonrover333
is there anyway of any of us getting a price any time soon?
#123
Originally Posted by Moonrover333
is there anyway of any of us getting a price any time soon?
Last edited by PoLaK; 12-05-2005 at 11:20 PM.