Greddy Turbo Install/Tune..who do you recommend?
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: Valdosta, GA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Greddy Turbo Install/Tune..who do you recommend?
Title says it...I'm in valdosta GA and having a very hard time deciding between self install or professional. Anybody know of a good recommended local tuner who can install/tune (I only have a COBB AP) this kit? Thanks And if I did do the self install could someone share their Basic AP map for stock greddykit/midpipe? So I can drive to the tuner.
Last edited by RX8 dood; 12-20-2009 at 06:40 AM.
#2
Turbos blow!!
Join Date: Oct 2004
Location: my engine bay
Posts: 1,584
Likes: 0
Received 0 Likes
on
0 Posts
Install is pretty easy. Like putting legos together. Tuning should be done by MazdaManiac if you bought the AP from him. If you did not, pm him and ask him for some maps. It will cost you but it is not expensive. If you questions during install be sure to ask. I don't know of any tuner/reputible shops in GA.
#4
1.3L of Fury
iTrader: (3)
Join Date: Jan 2009
Location: Colorado Springs
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
installation took me 2 day and a half in a parking lot, no special tools needed. Hardest part is getting the manifold with the turbo in place, once u have that in place the rest is cake!! make sure u get that AEM cai for ur kit!
#8
Registered User
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: Valdosta, GA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Kane, where are you currently located? I lived in williamsburg(mom till does) near Ft. Eustis for some time, before I joined the military. Install will probably be done sometime in February since I'm supposed to get back to the states in early Feb. Yeah I feel confident I could do the install I have alot of past experience with turbos, just not rotarys...and with no EMS I dont know how to tune AP, but I've already looked into MM just that government computers won't let me go to his website...
"be advised this web site has been categorized as Spam URLs and access has been restricted per AFCENT policy." So if you see this MM, don't know if you could fix that?
But yeah thanks for the encouragement to do it, can't ****** wait...
And Kane, if your at Ft. Eustis its about a 10hour drive.
"be advised this web site has been categorized as Spam URLs and access has been restricted per AFCENT policy." So if you see this MM, don't know if you could fix that?
But yeah thanks for the encouragement to do it, can't ****** wait...
And Kane, if your at Ft. Eustis its about a 10hour drive.
#9
Illudium Q-36 Space Moderator
iTrader: (1)
No worries; I didn't know you were military, in that case you provide some gas money and a cot + some rum and I'll provide the install help and the tune.
I am off until Feb 20... so let me know man. I am down to travel. And I am stationed at Ft. Eustis - I live in Gloucester Point.
I am off until Feb 20... so let me know man. I am down to travel. And I am stationed at Ft. Eustis - I live in Gloucester Point.
Last edited by Kane; 12-22-2009 at 12:14 PM.
#11
Pull My Finger
iTrader: (7)
man talk about a offer!
No worries; I didn't know you were military, in that case you provide some gas money and a cot + some rum and I'll provide the install help and the tune.
I am off until Feb 20... so let me know man. I am down to travel. And I am stationed at Ft. Eustis - I live in Gloucester Point.
I am off until Feb 20... so let me know man. I am down to travel. And I am stationed at Ft. Eustis - I live in Gloucester Point.
#15
Registered User
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: Valdosta, GA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Yeah man, that sounds like something I would deffiently be interested in...that is IF I can get airlift out of here by then...airlift is always hit or miss but I'm sure you know that...could be out early feb or late, but god knows the gov will kick me out before march 1st for those taxes!! But yeah, I don't have a cot but I have a nice comfy couch! with a liqour store down the street awaiting us! Damn that makes me wonder tho...I'm going home to Toano you know where that is? exit 227(i think) on I64 in April, havent spent a birthday with family in years.. If I can't make it home in time maybe I could wait until I come up there...
Is there anything I'm missing for the install? Or know of a better place to purchase these?
-Greddy Kit(no EMS)-have
-Cobb Ap-have
-Boost gauge-have
-AP DR midpipe- rx7store cart awaiting final decision
-Boost controller(undecided on which)
-Greddy OP-rx7store cart awaiting final decision (Also trying to get used on here)
-Greddy Catch Can-rx7store cart awaiting final decision(Also trying to get used on here)
-New OEM coils-rx7store cart awaiting final decision
-Also getting a MS front bumper-rx7store cart awaiting final decision
-AEM intake-trying to get used
-Can't decide on BOV, I want to vent..
Is there anything I'm missing for the install? Or know of a better place to purchase these?
-Greddy Kit(no EMS)-have
-Cobb Ap-have
-Boost gauge-have
-AP DR midpipe- rx7store cart awaiting final decision
-Boost controller(undecided on which)
-Greddy OP-rx7store cart awaiting final decision (Also trying to get used on here)
-Greddy Catch Can-rx7store cart awaiting final decision(Also trying to get used on here)
-New OEM coils-rx7store cart awaiting final decision
-Also getting a MS front bumper-rx7store cart awaiting final decision
-AEM intake-trying to get used
-Can't decide on BOV, I want to vent..
Last edited by RX8 dood; 12-23-2009 at 06:01 AM.
#16
Illudium Q-36 Space Moderator
iTrader: (1)
-Greddy Kit(no EMS)-have
-Cobb Ap-have
-Boost gauge-have
-AP DR midpipe- rx7store cart awaiting final decision - cut your cat, BHR, or the AP - just remember any kinda of resonated midpipe will blow out evetually; except BHR; thought they haven't logged the miles to prove it yet... so even theirs might go bad.
-Boost controller(undecided on which) - For the $$$ Greddy Profec SPec II; though there are some other really neat ones with lots of cool gizmos.
-Greddy OP-rx7store cart awaiting final decision (Also trying to get used on here) - you can skip it.... not really that big a deal.
-Greddy Catch Can-rx7store cart awaiting final decision(Also trying to get used on here) - get an ebay one; they all work the same - why pay $100?
-New OEM coils-rx7store cart awaiting final decision - BHR all the way; last set of coils you ever buy.
-Also getting a MS front bumper-rx7store cart awaiting final decision
-AEM intake-trying to get used - this is a good idea!
-Can't decide on BOV, I want to vent..NO VENT!!!!!!! not worth it man - the AEM and a BOV recirced will still be plenty loud for you - trust me; I run the Synapse recirced and a CAI; and I can hear it over the engine and radio with the windows closed.
-Cobb Ap-have
-Boost gauge-have
-AP DR midpipe- rx7store cart awaiting final decision - cut your cat, BHR, or the AP - just remember any kinda of resonated midpipe will blow out evetually; except BHR; thought they haven't logged the miles to prove it yet... so even theirs might go bad.
-Boost controller(undecided on which) - For the $$$ Greddy Profec SPec II; though there are some other really neat ones with lots of cool gizmos.
-Greddy OP-rx7store cart awaiting final decision (Also trying to get used on here) - you can skip it.... not really that big a deal.
-Greddy Catch Can-rx7store cart awaiting final decision(Also trying to get used on here) - get an ebay one; they all work the same - why pay $100?
-New OEM coils-rx7store cart awaiting final decision - BHR all the way; last set of coils you ever buy.
-Also getting a MS front bumper-rx7store cart awaiting final decision
-AEM intake-trying to get used - this is a good idea!
-Can't decide on BOV, I want to vent..NO VENT!!!!!!! not worth it man - the AEM and a BOV recirced will still be plenty loud for you - trust me; I run the Synapse recirced and a CAI; and I can hear it over the engine and radio with the windows closed.
Last edited by Kane; 12-23-2009 at 04:05 PM.
#17
Registered User
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: Valdosta, GA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Ok cool, I just hope I don't get shafted by airlift..I'll keep you informed thanks for the offer man! Oh and my greddy kit has the #2 fix and a recirc attachment already too so I can recirc no problem
Whats a recommended recirc BOV?
Whats a recommended recirc BOV?
Last edited by RX8 dood; 12-25-2009 at 08:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM
Michael Bryant
Series I Wheels, Tires, Brakes & Suspension
5
10-12-2015 03:07 PM