Brettus

iTrader: (2)

Do I need to mention which way round the screwdriver goes ?

Nemesis8

iTrader: (3)

THERMOSTAT is the culprit. Had the water pump pulley off and zero noise, put it back on, and the pump is quiet, but the thermostat is chattering.

Used my screwdriver to isolate the source - Brettus you kill me sometimes. Thanks

pdxhak

iTrader: (2)

^8k posts

Glad you figured out the problem!

Nemesis8

iTrader: (3)

And half of those posts don't make any sense... LOL

Yea, a thermostat is the easiest to fix also. I have two spares.

shaunv74

Phew! Glad you were able to diagnose and it was a cheap and easy fix.

makristal

860/1000

Mazmart

iTrader: (12)

If it's one of our thermostats at fault I'll be happy to replace it.

Paul.

Nemesis8

iTrader: (3)

Thanks - I have two spare OEM ones to try for now. So hang on and I will let you know.

Nemesis8

iTrader: (3)

Confirmed the bad chattering thermostat Paul. Purrs like a kitten again.

sebarx8

iTrader: (4)

good bro !!!!

Nemesis8

iTrader: (3)

Maybe yours is fubar?

sebarx8

iTrader: (4)

fubar?????????????

pdxhak

iTrader: (2)

http://en.wikipedia.org/wiki/FUBAR

sebarx8

iTrader: (4)

ahhhhhhhhhhhhhhhhhhhhh ok

FUBAR is an acronym that commonly means "fucked up beyond all/any repair/recognition".

...............

Nemesis8

iTrader: (3)

LOL - yep

Not really sure why mine was chattering. Must of been trying to open, and only chattering open and closed. Temps seemed normal, but I do remember seeing some hot temps the other day when it was hot outside...

sebarx8

iTrader: (4)

forget what i said before the noise still there so yes like you said is that bro i see if this weekend i do that

Nemesis8

iTrader: (3)

The one thing I miss about throttle cables, is the ability to rev the engine while under the hood checking on things. Dang drive-by-wire...

I still think I have a small air leak somewhere, but can't find it while the car is idling. The wife works all the time, and is never around when you need her to work the accelerator pedal.

Maybe I don't have a leak, as MM mentioned the other night during the AP Webcast, that a vacuum leak would trend my LTFT upward, to a plus value, and I do not have that. Maybe ceramic seals and streetporting is just going to be noisy? I have zero experience here, so maybe this is all just normal, and I am overreacting.

Really could use MMCCS v4.0.2 now, but the wait continues...

shadycrew31

iTrader: (6)

What do you mean by noisy?

Too lazy to re read everything, I'm on a street port as well but without the ceramic apex seals.

Nemesis8

iTrader: (3)

I think it is just me. It like a wissshing sound - hard to describe. I hear it mainly from the cabin. Could be that since I deleted the dampening under the hood bonnet, maybe I am just hearing the s-dais more than normal.

dondo

iTrader: (7)

i read that deleting the dampening material really increases the noise you hear

shadycrew31

iTrader: (6)

Well my exhaust is so loud I cant hear anything. But I haven't noticed and irregular sounds.

shadycrew31

iTrader: (6)

Also you might be noticing noises becuase your looking for them and before you weren't. that happens to me allot.

Nemesis8

iTrader: (3)

LOL - yea, after chasing that dang knocking sound around the engine bay, I'm being picky now.

The thermostat clicking noise was going through the entire coolant system, and the hard pipe across the firewall was amplifying it.

I'm back to waiting on MM to get me my next map.

In the meantime, I am looking at more gauges. I need a good A-Pillar pod, anybody know of one? I would like to add AFR, Fuel Pressure, and EGT possibly.

pdxhak

iTrader: (2)

Air bag in the A pillar.

Nemesis8

iTrader: (3)

There is only an air bag label on the pillar...

Click for a blast from the past