Jeff I still havent recieved mine. Everything ok? Im asking since you said it would take a couple of min.

Thanks!

 

You are hell-bent on driving me absolutely crazy, aren't you?

 

I could've told you that, lol

 

Jeff, I sent an inquiry to the upgradekit@ email address. Still good?

 

Yep.

 

Life's trippy.

I finished my second driving cycle tonight and my trims seem to be steady. Looks like she may be ready for some action. I will get the new Cruising and Idle logs to you tomorrow morning Jeff.

I noticed that I no longer see an "obvious" Open Loop AFR. I held it at 4400 RPM, cruise, a/c, defroster... and AFRs weren't as promiment as the 16's I was seeing before. They just held in the upper 14s and lower 15s.. I held it at 4400 for a good 2 minutes and no obvious switch. I guess the logs will tell.

 

Very speedy service Jeff, I'll get logging again soon.

You say that we should drive the car carefully with these base maps, is there anything else we should look at than AFRs to know if it's good/bad for the car?

 

You don't have to "drive it carefully" - just be careful the first times you stomp on it to make sure that nothing is screwy.
If you make your way through the full RPM band in 2nd and 3rd at WOT and nothing is funky, then it should be no problem. Just expect it to be too rich above 5500 RPM.
Like all things of this nature, when you are at the heart of an "experiment" of sorts, you should have your eyes open as you explore the boundaries.

 

Maybe

 

My 2nd driving cycle will be done on my drive home tonight and then i'll be sending in my logs.

 

LOL! I'll put it together today. Too many things going on at once over here.

 

Ahhh.. once again my load is maxing out at 90% at WOT.. it didn't do that with the first new BASE calibration.. bah

 

Sure no worries. By the way spoke to my mechanic friend today and im installing the 3071r on saturday, I dont know if the injectors as well or not since I havent recieved them yet. If I only install the turbo I can run with my current map but not going into boost right? If I do get my injectors im guessing I need a new map to be able to even drive it right?

Thanks!

 

jeff i got a small ? i got the greddy turbo with the int x and from 1st thru 4th gear it pulls perfect all the way to redline but when i get to 5th gear going like 100 mph it starts jerkin so i let go as soon it starts doing that..... it was tuned by scott and i got the fuel pump upgraded from him and injectors too, runnin wit no cat, and i have his upgraded cai too. and i just changed the spark plugs too... any idea wat could be wrong???

 

give us some more info. Are you using a boost controller? Do you have any data logs you can post? If not can you tell us what your AFR/MAF/Boost look like when its doing this?

 

It's kind of annoying at times how picky this thing is. I forget that my car is 2004 but thinks it's a 2005 cali model... so when I emailed my crap it had the wrong year. But I dont feel as bad because jeff missed that it said it was cali so I got a 2004 file when it should be 2005 cali.

Oh well, not exactly in a hurry or anything... just hope it's not too much trouble for jeff to fix.

/endrant

 

Start over with me.

I don't have any practical way of tracking stuff, so I need my hand held if you need corrections. I delete the old data after I send out the new calibration.

I just edited your info in my database to reflect that your car is an '05.

 

you should start a new thread, as this is for accessport calibrations

 

thanks, I just resent the info and should be correct this time.

 

yes. I sent you a confirmation. Look for stuff like that through e-mail rather than clogging up this thread.

 

Damn! Another photo shoot I missed!

 

^^^^
hmmm kinda strange you want a photoshoot with Jeff doing lots of different things?

stalker?

haha j/k

 

Jeff's to short and hairy for me.
How do you think he gets all those photos of the hot avatars he uses ?

 

yeah his avatar pics are just priceless :D

 

WTF?!? did MM code some kind of microwave delivered mind control in the latest rounds of calibrations??? No one has posted here in TWO days.... thats GOTTA be a record for the AP threads.