Notices
Gulf RX-8 Forum Serving TX, OK, AR, LA, MS

Official SARX Lounge

Thread Tools
 
Rate Thread
 
Old Aug 25, 2011 | 10:50 AM
  #4301  
shadycrew31's Avatar
WENTGERMAN
iTrader: (6)
 
Joined: Apr 2008
Posts: 5,806
Likes: 31
From: Burbs,PA
I think all of them sound the same except for my annoyingly loud RP/Hi-Power combo.

once you start welding on custom resonators and high flow cats the game changes a bit.
Reply
Old Aug 25, 2011 | 10:54 AM
  #4302  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
In my experience it also changes a bit. The Turbo XS sounded great at first but has become raspy. The HKS was loud at WOT and seemed to get louder over time, but sounded better than the others at cruise, idle, etc.
Reply
Old Aug 25, 2011 | 10:59 AM
  #4303  
shadycrew31's Avatar
WENTGERMAN
iTrader: (6)
 
Joined: Apr 2008
Posts: 5,806
Likes: 31
From: Burbs,PA
when I installed my header my cruise drone reduced dramatically. Also it is wrapped so I'm sure that helps out.
Reply
Old Aug 25, 2011 | 01:10 PM
  #4304  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
SIFU doin' it big. ******* sweet.

https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/dennis-tos-silky-smooth-mazda-rx-8-featured-maydaygarage-222102/
Reply
Old Aug 25, 2011 | 02:16 PM
  #4305  
shadycrew31's Avatar
WENTGERMAN
iTrader: (6)
 
Joined: Apr 2008
Posts: 5,806
Likes: 31
From: Burbs,PA
Thats why he was rollin round bumper less!

Unless hes so low that he never has his bumper on.
Reply
Old Aug 25, 2011 | 02:56 PM
  #4306  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Nah he has a stock bumper he rolls around on normally. He told me he removes his bumper to get in/out of his driveway lol
Reply
Old Aug 25, 2011 | 08:54 PM
  #4307  
Grungepup's Avatar
Oilfield trash
iTrader: (2)
 
Joined: Feb 2008
Posts: 2,509
Likes: 0
why yall gotta be hatin
Reply
Old Aug 25, 2011 | 09:28 PM
  #4308  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
TX

Originally Posted by Grungepup
why yall gotta be hatin

Rotor Shaped Tips FTW!
Reply
Old Aug 26, 2011 | 10:20 AM
  #4309  
Grungepup's Avatar
Oilfield trash
iTrader: (2)
 
Joined: Feb 2008
Posts: 2,509
Likes: 0
shhhhhhhhhhhhhhhhh
Reply
Old Aug 26, 2011 | 05:32 PM
  #4310  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
So........

****. I think I inadvertently bought something from Brice. To save about $6.00 I ordered the Prosport premium gauge on Ebay instead of direct from Prosport.

Look at what my paypal receipt says:

Hello Scott Redmond,

You sent a payment of $75.00 USD to performancewarehouse-direct (rx8sales@fluidmotorsports.com)
Thanks for using PayPal. To see all the transaction details, log in to your PayPal account.
It may take a few moments for this transaction to appear in your account.
________________________________________


What are the odds.......................Pisses me off.



Well, then i got this email....

Scott

I am currently out of stock of the peak/warn gauge. I do have the standard performance series gauge in stock, it would take me about a week to get the other back in stock.

Let me know
I requested a refund. What sucks is that I am broke and need the refund before I can order it from Prosport directly.
Reply
Old Aug 26, 2011 | 07:36 PM
  #4311  
houstonrx8er's Avatar
what was I thinking
iTrader: (8)
 
Joined: Jun 2004
Posts: 2,408
Likes: 0
From: Converse, TX
I am in need of some assistance (500pages later....ha-ha) ….looking to make an exhaust upgrade but am torn by my ignorance. I’m originally from Houston (hence the name) where emissions are a bitch but this is not the case in SA….so bare with me as my thought process follows.

I am thinking of going with RB or BHR Resonated midpipe (no cat) and Borla exhaust; I say resonating midpipe because I do not want to be “too loud” (I have grey hair showing up in my beard). I had thrown around the idea of BHR’s midpipe with dave sport cat or the RP supercat, but being you don’t get any HP gains unless you remove the cat I thought why not bite the bullet… nix the cat and get more than just sound. I am pretty sure my OEM cat is on its last leg because of misfires, seafoam and other misc issues over the years (04 w/120k miles, although I did get an engine swap at 60ish).

I am also thinking of Tein Basic suspension….thought on that as well?

It’s really all about the driving pleasure….I LOVE my car and would just like to “buy it earrings….and maybe a tennis bracelet……hell and some flowers”

Thoughts?

Last edited by houstonrx8er; Aug 26, 2011 at 08:06 PM.
Reply
Old Aug 26, 2011 | 08:10 PM
  #4312  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Exhaust sounds great but the tein basics are a bad choice IMO. Don't go low and don't ride so good I've heard. Coilovers are definitely one of those things that you get what you pay for. Bhr is coming out with a header/midpipe i think. It will be a header that collects much farther back than stock I believe. No idea when it will be released though.
Reply
Old Aug 26, 2011 | 09:03 PM
  #4313  
8 Maniac's Avatar
Senior Member
iTrader: (1)
 
Joined: Oct 2005
Posts: 3,814
Likes: 1
From: Aki City, Japan
Originally Posted by 9krpmrx8
So........
That's a pretty great story lol... hopefully you get your refund soon. I haven't seen you mention receiving the motor yet, so you should have plenty of time to get it in somehow. Pretty awesome that you avoid ordering from them and the time you accidentally do, they have the product out of stock.

Where did the email come from? Just did a quick check and fluid website isn't up anymore. They could still be receiving email, but it still seems odd that they'd be using that address.

I'm assuming this is through race roots.. and if it is, there's even more amusement. It would appear the gauge is in stock! At least according to their website.
Reply
Old Aug 26, 2011 | 09:40 PM
  #4314  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
TX

Originally Posted by 8 Maniac
That's a pretty great story lol... hopefully you get your refund soon. I haven't seen you mention receiving the motor yet, so you should have plenty of time to get it in somehow. Pretty awesome that you avoid ordering from them and the time you accidentally do, they have the product out of stock.

Where did the email come from? Just did a quick check and fluid website isn't up anymore. They could still be receiving email, but it still seems odd that they'd be using that address.

I'm assuming this is through race roots.. and if it is, there's even more amusement. It would appear the gauge is in stock! At least according to their website.

Yeah the email was from Brice, the email address was rx8sales@fluidmotorsports.com. What was weird though is that my paypal payment was to some ladies name. Funny stuff going on there either way.
Reply
Old Aug 27, 2011 | 12:25 AM
  #4315  
hoss -05's Avatar
Thread Starter
Lucky #33
iTrader: (4)
 
Joined: Feb 2009
Posts: 2,851
Likes: 5
From: San Antonio, SARX Garage
I am also thinking of Tein Basic suspension….thought on that as well?

It’s really all about the driving pleasure….I LOVE my car and would just like to “buy it earrings….and maybe a tennis bracelet……hell and some flowers”

Thoughts?
Sounds good on the exhaust, Agree with J8635621 on the Teins. Pick up a nice set of springs and dampeners first. I like the idea of using the bilstein HD dampeners as they are later rebuild-able with sleeved springs to race spec.
Reply
Old Aug 27, 2011 | 07:09 AM
  #4316  
houstonrx8er's Avatar
what was I thinking
iTrader: (8)
 
Joined: Jun 2004
Posts: 2,408
Likes: 0
From: Converse, TX
sounds good on the resonaded midpipe vs hi flow cat? I think I just about to pull the plug but I dont want to end up waking the neighbors when I leave in the morning.

I am replacing coils today along w/ fluid swaps all around and window belt molding to keep all the rain we get in SA out of my door...ha-ha.

Thanks for the feedback guys!
Reply
Old Aug 27, 2011 | 07:39 AM
  #4317  
hoss -05's Avatar
Thread Starter
Lucky #33
iTrader: (4)
 
Joined: Feb 2009
Posts: 2,851
Likes: 5
From: San Antonio, SARX Garage
No problem, You should join us for one of our regular meet ups. PM 9KRPMRX8 or Grungepup for a time and place.
Reply
Old Aug 27, 2011 | 07:47 AM
  #4318  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Resonated mid isn't too bad at low rpms. It is louder but not obnoxious.
Reply
Old Aug 27, 2011 | 07:48 AM
  #4319  
houstonrx8er's Avatar
what was I thinking
iTrader: (8)
 
Joined: Jun 2004
Posts: 2,408
Likes: 0
From: Converse, TX
I PM'd Scott and he mentioned there might not be a meet till it cooled off. I would love to meet up, I've been here for 7yrs and for some reason never looked into it (I did in Houston and helped orchestrate several scenic drives (although I spent most of my time waiting on ppl to catch up

I like your idea of blistein HD's....for springs it looks like Tanabe GF's maybe be the way to go.
Reply
Old Aug 27, 2011 | 07:58 AM
  #4320  
houstonrx8er's Avatar
what was I thinking
iTrader: (8)
 
Joined: Jun 2004
Posts: 2,408
Likes: 0
From: Converse, TX
Originally Posted by J8635621
Resonated mid isn't too bad at low rpms. It is louder but not obnoxious.
Thanks kind of what I am going for, quite when I need it but dont mind some ear candy when I get on it
Reply
Old Aug 27, 2011 | 10:17 AM
  #4321  
shadycrew31's Avatar
WENTGERMAN
iTrader: (6)
 
Joined: Apr 2008
Posts: 5,806
Likes: 31
From: Burbs,PA
Scott what gauge are you ordering?
Reply
Old Aug 27, 2011 | 11:44 AM
  #4322  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
TX

Originally Posted by shadycrew31
Scott what gauge are you ordering?
Prosport premium oil temp gauge. My current one keeps messing up and it need a new sending unit so I ditched it. I traded my factory dash top for one with the lotek pod so i will have those three spaces plus the dual pod. I didn't want to have a bunch of gauges but this is the most cost effective route.
Reply
Old Aug 27, 2011 | 01:39 PM
  #4323  
hoss -05's Avatar
Thread Starter
Lucky #33
iTrader: (4)
 
Joined: Feb 2009
Posts: 2,851
Likes: 5
From: San Antonio, SARX Garage
Nice dude! Good job on the find. I know some day I may have to pick up a second gauge myself.... not looking forward to it.
Reply
Old Aug 27, 2011 | 01:44 PM
  #4324  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
TX

Originally Posted by hoss -05
Nice dude! Good job on the find. I know some day I may have to pick up a second gauge myself.... not looking forward to it.

Yeah the guy had a tree fall on his turbocharged RX8 so he is going back to stock before the the insurance comes to pick it up.

I plan on having oil pressure and fuel pressure in the dual pod and EGT, oil temp, and AFR in the center pod.
Reply
Old Aug 28, 2011 | 05:43 PM
  #4325  
gunfyter's Avatar
Registered
 
Joined: Feb 2011
Posts: 112
Likes: 0
From: San Antonio
Brakes squeal?

See this post/thread #8


I did the recommended Brake burn in procedure ... Squeal gone. I think I scared the crap out of the other driver in the lane next to me on 1604 access road

Last edited by gunfyter; Aug 28, 2011 at 05:51 PM.
Reply


You have already rated this thread Rating: Thread Rating: 1 votes, 5.00 average.


All times are GMT -5. The time now is 12:13 PM.