^So you don't actually want to get a wider wheel on the rear...Just a wider tire? I mean you could put a 245 in the rear on the 8" stock wheel, but usually when people go staggered, the rear wheel is actually wider than the front...Not just the tire.

 

I probably will change the wheel out eventually but not right now. So if I went with 245's should they be 245-45-18? or 245-40-18?

 

Alright guys, got a curve ball.

I'm lowered on Stance Coilovers, about 1.1 all around I'd say. Similar to Stechs, but evened out on the conservative side, hows that?

18x9 +29 with 255/35/18

or

18x9 +25 with 255/35/18

will it fit?! I have to get this order going and apparently know this by 6pm to get my order out.. :/ Thanks for the help guys.

 

You'll be fine, need a roll.

 

245/40

 

will 275/30/19 fit all around with an s-tech drop? Thinking about some nitto NT-05's but they only come in 245 or 275. Rim width is 9.0 ET +40
TIA

 

^I would think with some camber you would clear fine.

 

how sick would that look if I could get it to work

 

What about this setup:

Front: 19x8 ET45
Rear: 19x9,5 ET35
Fenders: rolled

What kind of tires should I use? I want 275 in the rear

 

gunna have to use a 30 profile tire, should work though

 

Alright...I dont really know a lot about all of the offsets and such, but If I was to change out my wheels, What size wheel/tire should I get? I wanna go as wide as possible in the back without sticking out. I want the tire to be under the car, rather than outside of it. I would probably want to go with at least 19" rims.

 

I'd say Jedi pushed it pretty far w/his Advans - 19x8.5F (dont' remember the offset) 19x10R +48

There's also someone selling 20" Volk GTC's that seemed to fit nicely.

 

you rang?

My advans =
19x8.5 +38
19x10 +42


They're pure sex.

 

^well there you go.

 

So this is where the cool kids hang out...

 

Jedi, did the wheels stick out at all? did you have to do anything different? like suspension? or "rolling the fenders" Im looking at the s-tech lowering springs right now...

 

see for yourself.
Let me know what you think. https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/jedis-new-advan-model-t5s-172577/

 

Nevermind - he posted up the link

 

Those looks awesome! What does rollling the fenders consist of? is it expensive?

 

The lip below the fender, you "roll it" so it wont stick out and rub on the tires.

 

is that expensive?

 

define "expensive"

 

lol, what is the average cost to do this? is it like $100 or $1000

 

about $150 to roll fenders. Give or take $50 depending on the shop.

 

thats not bad. one more question...

about how many inces wide would my back tire be with a 275 tire?