You're going to need a roll and maybe some camber work.

 

how about with +38 on the same size wheel?

 

^will depend on tire profile then.

It will be close

 

anyone got a
19x8.5 front
19x9.5 rear
offset 35

what tire sizes are you running?

 

I would assume 245/35/19 front and 275/30/19 rear or maybe one size smaller in the rear if you don't want to roll the fenders (it'll still be pretty close though I think). Just a guess. You might want to check back the past 50 posts or so. It has been asked multiple times afaik.

 

run 255 all around

 

thank you for the help, im having issues on what i want to get and this post is helping; sorry for the redundent questions.

would i require a fender roll?

 

shouldn't

 

18x9.5 +30 will work...run 255/35R18 or skinnier. roll might be needed if you're dropping it 1.5" with some neg. camber. but that also depends on what kind of tire manufacturer you run. falkens run thinner than most companies so you might be able to pass with that. otherwise, fender roll will be needed

 

18x10 +35, anyone think they'll fit with some negative camber and a roll/pull

Also, 18x9.5 +38

 

Yeah it'll fit no problem

 

which the 18x9.5 or 18x10

 

both

 

curious what the deal is with staggered rims

tried a short trip with stock 18 with 225/45 on front and 18x10 +30 with 245/35 rear and the ABS started acting up then the sidewall broke on one of the tires, literally seperated from the rest of the tire, which is(was) brand new....

 

245/35 is a bit shorter than the 225/45. I don't think the car likes seeing big differences in the speeds of the front and rear tires.

 

Oddly enough I ran different sized tires for a couple months last year(235/40 and 225/40 IIRC) on 18" rims that weren't staggered and never had any issues....

today was literally 20 kms before the driver side tire demolished, I might steer clear of Falkens altogether after todays experience....

 

I was told 245 on 9.5 rim would be a stretch; can anyone provide or point me in the direction of a rim with 245s on them? Thanks

 

^8.5, would fit nicely,....thanks atilla

 

What would be good for a 9.5? I have black enkei RPF1s sitting in my room (9.5), and I don't want to get that horrible stretch look, but I don't want to get excessively wide.

 

atilla! chime in you *sshole...

 

IMO - 275's look nice on 9.5's - especially rpf1's.

FWIW, They fit nice on ms springs and struts. what are you lowered on??

 

245 will be perfect on a 9.5, I dont get why so many people run 275, unless you only autox, its too much tire.

 

I'm lowered on racing beat spring with tokico d specs and do you think the 275s will be excessively wide?

 

Yeah, you'll be fine.

racing beat and dspecs are a modest drop so you should clear fine w/275's. If you wanna play it safe 265's will work too.

 

Yeah I can't have it too low with the ms kit. What would be a good sidewall ratio for 265 that will preserve the speedo accuracy? 35?