vtec this

k thanks

vtec this

ok ive changed my mind from the gram lights to the work vs-xx, i can get them in practically any size and almost any offset, car is dropped with the eibach pro springs kit, what is the fattest 18 i could fit in the rear with the best offset to make flush without any rubbing or fender rolling. What is the the best offset for front to make flush, with a wheel thats maybe a half inch or inch thinner than the front.

imput1234

iTrader: (6)

18x10 is the fattest, you will need to roll, if you wanna be flush.

vtec this

so what about a 18x9.5? and what would my offset need to be? Does rolling fenders make the paint crack?

imput1234

iTrader: (6)

If you just wanna run max tire.

People run 18x9.5 with 275 all around, but it won't be flush. How the fender will look like after getting rolled depends on who rolled it.

Riken

k how about
Axis Supermesh 19'
Offset: 45
5x 114.3
19x8.5 in the front 19x9.5 in the rear

Riken

where r u imput1234 lol

thawk97

Is it possible to put 19x8's @ 38mm on without doing anything to the car? Is that a stretch or not? What size wheels on that without having to make any changes? (this would be my first venture away from stock and I don't want to have to make other adjustments to get them to fit)

(also - I plan to drive the car on regular roads so if a pothole is going to wreck me at that size please tell me)

J8635621

iTrader: (10)

both of those should fit easy lol really easy

TopGear8

iTrader: (3)

Yeah that will fit fine.

Ikon

VR TE37s

19'x8.5 +30 Front
19'x9.5 +34 Rear

Front: 245/35ZR19
Rear: 275/30ZR19

Atm on stock suspension, plans to go to Tein S Tech Springs.

TopGear8

iTrader: (3)

You'll need a roll.

imput1234

iTrader: (6)

lol

19 feet maybe a little too big, lol. you'll be fine.

vtec this

lol those are some blingin wheels, youd have an rx8 sittin higher than monster trucks on those ninteen footers

alexisthemovie

paint cracks are inevitable. The best tip I can give is to heat it up really well and be patient when you roll/flare. The fact is, you are bending CURED paint. Luckily, the paint cracks usually aren't visible and you can just apply touchup paint with your finger around the areas and it will look perfect.

Riken

lol Ill need a elevator to get to the driver door hahaahha

So do I need to roll the fenders or anything?

alexisthemovie

no 9.5 +45 is a safe size

atl04rx8

couldn't find much for i am looking for so here it goes. I am looking to put 18x9 +30 Rota boost rims on 245/40/18 Nexen 3000 tires with oem shock and springs. Am i gonna have any problems? do i need a spacer? Lug nuts specs and choices??
I am really in need for help, thanks a alot.

djcharlee

iTrader: (2)

Not sure about tires, but I am running the same set of Rota's on stock 225/45/18. No issues, no spacers, no problem.

But I would like to know if those would be the best tires to get rid of the stretched look I have.

dannobre

iTrader: (3)

Should be good....puts the outer edge in a good place and the tires aren't going to cause a problem. Won't need spacers...cause if you do have a problem it will be on the outside corner of the rears...might need a roll depending on the tires

atl04rx8

I am sorry, but what is a roll?? thanks

dannobre

iTrader: (3)

If the rears rub you can "roll" the fender lip in with a special tool and get about 1/2" more clearance for the tire. It will also make the edge round there instead of a sharp metal edge that cuts into the tire.....

atl04rx8

I should be pretty safe with 18x9 +48 rims and 245/40/18 right?

alnielsen

iTrader: (4)

It shouldn't be a problem at all. I've run 245/40's on a 8" rim.

toxiczwud

First post woo.
Um will 18x9.5 all around +38 offset fit.
Was thinking of running 265 on back and 245 on front.