Notices
Series I Wheels, Tires, Brakes & Suspension

Will It Fit Thread

Old Jun 12, 2011 | 09:59 PM
  #7076  
isays's Avatar
Registered
 
Joined: Mar 2010
Posts: 71
Likes: 0
From: Nova Scotia, Canada
ok, hopefully last time i have to ask, i'll talk specifics now.

The rims I'm thinking of getting are the Enkei Performance KLAMP
18x1.8
Offset: +42mm
Backspacing: 6.37"

the tires I'm thinking of are:
ExtremeContact DW
245/40ZR18

this is for both front and rear.

Stock suspension and setup.

is that going to work? That offset seems large, but thats what tirerack recommended...

I'm going for a 245/40/18 setup, any better suggestions for rims in the same price-range?
Reply
Old Jun 13, 2011 | 07:18 AM
  #7077  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
18x1.8? That offset is pretty close to stock aka exactly what Tire Rack is gonna tell you. That's definitely going to fit. Will it look the best? Probably not.
Reply
Old Jun 13, 2011 | 07:47 AM
  #7078  
isays's Avatar
Registered
 
Joined: Mar 2010
Posts: 71
Likes: 0
From: Nova Scotia, Canada
Originally Posted by J8635621
18x1.8? That offset is pretty close to stock aka exactly what Tire Rack is gonna tell you. That's definitely going to fit. Will it look the best? Probably not.
sorry, 18x8.5.
haha, donno how i messed that up

well, i'll keep looking a bit then. I really liked the enkei performance lusso, but they only came in 8" and 9", no 8.5.... and i figured 18x9 40+ would be too large for the front.
Reply
Old Jun 13, 2011 | 08:06 AM
  #7079  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
It's not
Reply
Old Jun 13, 2011 | 06:16 PM
  #7080  
isays's Avatar
Registered
 
Joined: Mar 2010
Posts: 71
Likes: 0
From: Nova Scotia, Canada
Originally Posted by J8635621
It's not
even in stock suspension without rolling? I just went and did a rough measurement, 18x9 +40 seems too big for the front, with 245/40 tires... it was just a rough measurement, but it didnt seem like there was that much space over stock rims/tires. i wanna take this out to the track at some point so I want full suspension travel.

are other people running series I with that in the front without any modification and without issues? (this thread is way too long to search all of, i tried for a while and gave up)

sorry, your reply was just so terse that I have a hard time believing it...
Reply
Old Jun 13, 2011 | 06:44 PM
  #7081  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Go rough measure again? I don't know what to tell you. 9.5 +45 with 275s fits on a perfectly stock car.
Reply
Old Jun 13, 2011 | 06:50 PM
  #7082  
MazdaManiac's Avatar
Banned
iTrader: (3)
 
Joined: Oct 2003
Posts: 16,386
Likes: 28
From: Under my car
Originally Posted by J8635621
Go rough measure again? I don't know what to tell you. 9.5 +45 with 275s fits on a perfectly stock car.
Not in the front it wont.
It will rub on the inside of the wheel wells at something significantly less than full lock.
Reply
Old Jun 13, 2011 | 07:03 PM
  #7083  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
??? Do I need to find pictures?
Reply
Old Jun 13, 2011 | 07:19 PM
  #7084  
tiltmode43's Avatar
OMGITM!
iTrader: (15)
 
Joined: Jan 2006
Posts: 3,513
Likes: 6
From: Sunny Southern California
Originally Posted by MazdaManiac
Not in the front it wont.
It will rub on the inside of the wheel wells at something significantly less than full lock.
When significantly lowered*
Reply
Old Jun 13, 2011 | 07:27 PM
  #7085  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Originally Posted by tiltmode43
When significantly lowered*
Even Team used them and was pretty low. I'm not sure if they were 265 or 275s. I'm sure he never rubbed or modified the fenders though because that would be r3tard3d and juv3nil3
Reply
Old Jun 13, 2011 | 07:53 PM
  #7086  
MazdaManiac's Avatar
Banned
iTrader: (3)
 
Joined: Oct 2003
Posts: 16,386
Likes: 28
From: Under my car
Originally Posted by tiltmode43
When significantly lowered*

No. All the time.

Even 265 will rub the inside of the wheel wells when at full lock.

Hell, I can get 255's on 42mm offset 9" to rub the inside with the suspension loaded in a turn!

I think that most people that will put 275s on the front of their car are posers anyway. So, fully loading the suspension probably wont happen.
Reply
Old Jun 13, 2011 | 08:13 PM
  #7087  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Yea your car must turn harder than all the other rx8s ever built.
Reply
Old Jun 13, 2011 | 10:33 PM
  #7088  
RX8inSTL's Avatar
Adam
iTrader: (7)
 
Joined: Jan 2010
Posts: 712
Likes: 10
From: Imperial, MO
So I am being a little lazy but I hope someone answers this, anyway im thinking about getting an aggressive set of wheels and have just been looking around. Came across these.

http://zilvia.net/f/wheels-tires/388...lipop-red.html

I already have my fenders rolled some but can do more since im sure id have to. Just dont know if id have to run a lot of negative camber or not. Plus is the tire size on them good or would I be better off running a 45 series?
Reply
Old Jun 15, 2011 | 07:31 AM
  #7089  
slvrstreak's Avatar
Angler of the Year
iTrader: (3)
 
Joined: Dec 2009
Posts: 1,557
Likes: 5
From: George-uhh
19X8.5 30mm wrapped in Falken 452s 245/35/19
lowering on Progress Tech springs -1.3F, -0.8R
will it still fit?

Last edited by slvrstreak; Jun 15, 2011 at 07:35 AM.
Reply
Old Jun 15, 2011 | 07:35 AM
  #7090  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Offset noob. You say still fit so what are you lowered on now?
Reply
Old Jun 15, 2011 | 07:42 AM
  #7091  
slvrstreak's Avatar
Angler of the Year
iTrader: (3)
 
Joined: Dec 2009
Posts: 1,557
Likes: 5
From: George-uhh
beat ya to it
stock right now...putting the springs on this weekend
crossing my fingers that i wont need a roll...should be close
Reply
Old Jun 15, 2011 | 07:49 AM
  #7092  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Should be fine
Reply
Old Jun 15, 2011 | 08:07 AM
  #7093  
slvrstreak's Avatar
Angler of the Year
iTrader: (3)
 
Joined: Dec 2009
Posts: 1,557
Likes: 5
From: George-uhh

thanks J
Reply
Old Jun 17, 2011 | 04:23 PM
  #7094  
Kahl's Avatar
Registered
 
Joined: Feb 2011
Posts: 278
Likes: 0
From: Wernersville, PA
Work CR kai 18x9.5 +38 all around on 245 40 18 hankook v12's?

I am a complete tire noob and was directed to this thread... I basically chose numbers of the rim sizes I've seen that I like and I like rx 8speciale's tires from here:
https://www.rx8club.com/forum/showthread.php?t=212553


Would it be better if I changed any numbers around? I'm being serious when I say I'm a complete noob. Also would it look dumb on the stock suspension? If so, feel free to recommend some stuff for me to lower (I don't want to scrape all over the place though, there are some bad roads around here).

Thanks.
Reply
Old Jun 17, 2011 | 04:27 PM
  #7095  
The Reverend's Avatar
That's a lie
iTrader: (1)
 
Joined: Jan 2009
Posts: 2,320
Likes: 1
From: I don't wear panties
read through the thread for a couple hours and you will get a good idea of what fits

but yes that should fit easily, be aware that 245s on a 9.5 wheel will look a little bit stretched so make sure that is a look you want before you buy the setup
Reply
Old Jun 17, 2011 | 05:21 PM
  #7096  
Kahl's Avatar
Registered
 
Joined: Feb 2011
Posts: 278
Likes: 0
From: Wernersville, PA
Originally Posted by The Reverend
read through the thread for a couple hours and you will get a good idea of what fits

but yes that should fit easily, be aware that 245s on a 9.5 wheel will look a little bit stretched so make sure that is a look you want before you buy the setup
What do you mean stretched? What would look better? Thanks
Reply
Old Jun 17, 2011 | 05:27 PM
  #7097  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Look up RX8Soldier or SoldierRX8....something like that. He has the same fitment and suspension setup you are asking about. If you aren't planning on lowering the car much, 255/40 all around could work.
Reply
Old Jun 17, 2011 | 05:34 PM
  #7098  
The Reverend's Avatar
That's a lie
iTrader: (1)
 
Joined: Jan 2009
Posts: 2,320
Likes: 1
From: I don't wear panties
see it feels gud to be nice j
Reply
Old Jun 17, 2011 | 07:43 PM
  #7099  
Kahl's Avatar
Registered
 
Joined: Feb 2011
Posts: 278
Likes: 0
From: Wernersville, PA
I like the look of the tires here:
https://www.rx8club.com/forum/showthread.php?t=212553

Those rims are similar looking o the ones I'll be getting too. Is that the stretched look you're talking about?
Reply
Old Jun 17, 2011 | 09:37 PM
  #7100  
ElSuaveChino's Avatar
Registered User
 
Joined: Aug 2010
Posts: 22
Likes: 0
From: Newark, Nj
19x9.5 front 245/35/19 +30

19x10.5 rear 275/35/19 +40
Reply

Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 4 votes, 5.00 average.


All times are GMT -5. The time now is 01:32 AM.