19x8.5 +30 all around.
Is it possible? Any recommendations on tires and guard modifications will be greatly appreciated.


Also might be a good idea to adjust original #1 post in this thread to include sizes that have been asked before.
I think it would save a lot of re asked questions.

 

245s for the bbs would male it work.

15mm spacers is more what I'd recommend for stock height and stock wheels.

Last guy post your suspension info.

 

Put on the 25mm all round yesterday. it looks sweet !!!!

I might drop the car on springs while i get my coilovers next year but over all im very satisfied with the looks.

But im just scared shitless i didnt tighten the spacer to the hub enough lol. I dont have a torque wrench with the pound/feet readings. I just used a deep socket with my torque gun and pulsed it till the lug nut wouldnt turn anymore.

 

I found some cheap enkei RP03, but he's not sure of the offset. He said possible +20 because they sit flush on a supra. Enkei's website states that the 18x19.5 are only made with a +38 offset.
So:
18x9.5 +20 (possible +38)
245/45 (whats on them now, but can change if needed)
Front & Rear

Dropped on Tanabes GF210 with stock struts.

 

Tires are too tall for the front and you need to know the wheel specs for sure.

Those spacers don't need to be too tight. I think it was a pretty low torque spec for my project kics spacers.

 

If the wheels were a +30 offset what would be a good choice for tires without doing any modification of fender rolling?
thanks for the help!

 

I don't answer hypotheticals.

 

Hey guys!I found a good deal for a set of wheels..
I am in stock height and i cant be lowered due to the body kit i have sooo,
18x9j et27 all around,will it fit?
what tires shall i use?i have a new set 235/40/18 will they do the job?
Arigatō gozaimasu!

 

Sorry let me try again!

18x9.5 +38 F&R
265/35
Lowered on Tanabe GF210 with Stock struts.

 

Rp03 will work fine. Fender roll possibly needed. Depends on camber

 

I have greddy coilovers. And might be getting tein coilovers at the end of the year

 

245/35 should be fine.

Spyros that will fit but the wheels will probably be outside the fender.

 

Thanks for the reply dude!
That's the plan,the damn sideskirts i have made my stock wheels look like bicycle wheels lol

 

Was the 245/35 directed at me?

 

yes

 

I'm eyeing up a set of XXR 527's in 18x9.75 +20

How much of a headache do you think this will be with BC Racing coilovers?

 

all depends on tires

225 very easy, 275 very hard

 

Thank you for your help. Much appreciated

 

Yeah there is no way i'm stretching tires. Damn, XXR needs to make that wheel in something other than +20!

 

Get a thinner wheel?

 

They have an 18x8.75 in +20 and +35.

Would the +20 fit with say 265 section tires?

I'm looking at the wheels here: http://www.nlmotoring.com/XXR-527-Wheels-s/1649.htm

Chromium Black is what i'm looking for for my Titanium Gray 8.


However, they do have the "522" in 18x9.5 +38. Those should fit with 275 section, no?

 

+35 for the first or +38 for the second

 

Thanks.

 

hi guys!

will 245/45 on 17"x10 +30 fit without always being chased by cops???(:

cheers

 

Not enough info