Calling all WORK wheel owners
#652
Hate Scrape 8
Your also an idiot. Totally different subject. Post pics of your 8 mister I know everything. You probably don't even belong in this thread. Did I do anything to start **** with you? No. So STFU. And have a GREAT day!
#654
whatsup guys i got work xt7's 18x9.5 +30 all around i dont know what would be the best tire size to run i was thinking bout doing 245/40/18 all around but is there a better combo for better performance and how much fender problems will i be running into
#655
Pew Pew Pew
iTrader: (10)
I don't have Works, so I won't post any pics. You did try to tell me that staggered means having the front wheels not flush. Don't deny it.
Look at how many posts you have and then look at how many I have in just the Will It Fit thread. I know what I'm talking about lol.
Look at how many posts you have and then look at how many I have in just the Will It Fit thread. I know what I'm talking about lol.
#656
Pew Pew Pew
iTrader: (10)
http://www.flickr.com/photos/j863562...7623744260352/
Invo are pretty wide for 245s I think. I had to roll the rear fenders and trim some of the plastic off the bumper tab. Not a bunch of work really. If you aren't lowered, the wheels are gonna stick outside the fender. It's basically the setup you are asking about. 2-3mm is almost nothing.
#661
Well I will make a call tomorrow to see if I can still change the order.
I am getting my thoughts change... many different ideas from different people.
To be honest, my original staggered setup is bad?
I am getting my thoughts change... many different ideas from different people.
To be honest, my original staggered setup is bad?
#663
Pew Pew Pew
iTrader: (10)
Another way of putting it is that staggered is not necessary or good. It's not bad necessarily either.
Is there any reason why you wouldn't want the front to have a concave face as well?
#666
Registered
iTrader: (3)
this is semi-concave, some might hate it, but personally i don't think i've got am aggressive enough kit to go with the full concave look.
and kenken, yes and no, some offset overlaps each other (concaveness-wise) but yeah, check the spec sheet to see which ones are concave and which one's flat, or which ones are in the middle.
fyi j8635621, evo x has 8.5 stock wheels wrapped in 245 rubbers. not saying you can't run 245 on a 9.5, but is it better? idk
Last edited by dezau; 03-01-2011 at 11:21 PM.
#667
Hate Scrape 8
I don't have Works, so I won't post any pics. You did try to tell me that staggered means having the front wheels not flush. Don't deny it.
Look at how many posts you have and then look at how many I have in just the Will It Fit thread. I know what I'm talking about lol.
Look at how many posts you have and then look at how many I have in just the Will It Fit thread. I know what I'm talking about lol.
#668
Pew Pew Pew
iTrader: (10)
You sad your fronts are tucked in too much ok And yes I said I like the staggered look but what I was trying to say was I like the rears pokeing out more than the fronts to excentuate the rears to make them look fatter. OK so I ****** know what staggard means and your post # obviously reflects how much time you have on your hands to complain about nonsence ok. I apologize but reading it sometimes doesn't sound as good when your explaining it in person. So that comment really ticked me off
Last edited by J8635621; 03-02-2011 at 08:50 AM. Reason: forgot to put OK
#669
Pew Pew Pew
iTrader: (10)
That Evo thing doesn't really have much to do with it. There are reasons to have 285s on an 8" rim and there are reasons to have 245s on a 9.5". It all depends on what you want to accomplish. 245s on a 9.5 give more responsiveness for example due to tighter sidewalls.
#671
Hate Scrape 8
#672
That's a lie
iTrader: (1)
lol guys
the only thing j is saying is that staggered means the wheel sizes are different it doesnt really have anything to do with either wheels being tucked. you could have staggered and both be flush, which is the case on most cars that actually put power to the ground and need wider tires in the back
the only thing j is saying is that staggered means the wheel sizes are different it doesnt really have anything to do with either wheels being tucked. you could have staggered and both be flush, which is the case on most cars that actually put power to the ground and need wider tires in the back
#674
Pew Pew Pew
iTrader: (10)
I took the liberty of doing some proofreading on your last post though. Hope you don't mind.
More to the point
Last edited by J8635621; 03-02-2011 at 12:35 PM.