Lol yep ordered mine five or six weeks ago they just got to the states today! Cant wait till they are at my door step!

Ravspec was the last place I tried and they had a set in stock...unfortunately the gentleman I spoke to said they were just tagged for hold at the end of last week!!

As a side note, Ravspec was awesome to deal with! When I decide what to go with I'll be contacting them for sure! Thanks for your help guys

If someone is interested in buying a set of CR KAI I have mine for sale.
Work Emotion CR Kai 18x9.5 +38 WMB (Work Metal Buff)
For Sale: https://www.rx8club.com/gulf-sale-wanted-143/fs-mazdaspeed-other-aftermarket-parts-199765/

https://www.rx8club.com/attachment.p...5&d=1223761842

sooo apparently my wheels have been in the states since Tuesday, however, there is a strike at the port and they have been unable to unload them wonderful...

Finally got my wheels Ill post up pics as soon as they get mounted !


http://sphotos.ak.fbcdn.net/hphotos-..._7931977_n.jpg


http://sphotos.ak.fbcdn.net/hphotos-..._2886368_n.jpg

^ grats!

Finally got em mounted!

Ill add more later

http://sphotos.ak.fbcdn.net/hphotos-..._8355665_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._5343952_n.jpg

http://www.altspace.com/photos/7310/sunrise7310n.jpg

http://www.altspace.com/photos/7310/sunrise7310o.jpg

http://www.altspace.com/photos/7310/sunrise7310p.jpg

^ new revi duct?

^He's had that..

Yup, for quite awhile now. Check the blog. ;) http://altspacerx8.blogspot.com

Does anyone have a picture of a brilliant black with bronze cr kai and also the gunmetal? I have looked all over and still havnt found any. Thanks

^^ Cuz I'm felling like a nice guy

Take a look at this thread: https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/parting-shots-197864/

You just have look harder my friend because there were some good ones right here in this thread (post 111, 112) https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/calling-all-work-wheel-owners-114299/page5/

FYI if your looking for a concaved face you need a 18x 9.5 et + 30 or +38. Most run a 265/35/18 275/35/18/ 255/40/18 tire set ups.

I appreciated the help a bunch. So right now my suspension is stock if i get the 18x9.5 +38 will i be able to run them without rubbing? Im not quit sure if thats what I want but it seems like what everyone else gets. As far as the tire goes it seems like i need the 265/35/18, but once again I want it to fit without rubbing at least until I lower it. Because, I am not wanting to do the suspension till later. The 18x9.5 +30 will stick out slightly less? Correct? Sorry, Im new to all this. Thanks in advance

... you won't rub and it will have more wheel gap than stock with those sizes... you can see mine in a week or two ill be back in stl at that pt...

Hey everyone, been a while since I posted any pics so here are a few from a show back in June, car is tentatively scheduled for professional pics for an upcoming magazine feature and once that happens I should have some nicer ones to post, these were shot by me after slaving over the car in 100+ degree heat and 80+ humidity at a show in Houston, (found out later the heat index was 120! yikes) it's wonder they're even somewhat in focus :D: There's some sweet rides and sick wheels in this thread, keep up the good work! :)

Good god, talk about being slammed. What were the specs on these bad boys again?

Lower offsets stick further out on the wheel well.

You will not have any problems with rubbing using any of the size that I have mentioned. Most people do go with 265/35... if you really want to finish the look off I suggest going with a good coilover or a set of good lowering springs and a strut with a low mount perch to eliminate as much fender gap as possible..

they're 19x8.5 on the front, 19x9.5 rear +36 front and +29 rear :)

At a time, this is EXACTLY how I wanted my car to look. Nostalgia kicks hard, car looks great!

^Thanks tilt that means alot much appreciated

http://texasrxs.org/junk/mini-me/2.JPG

older picture of the car from November 2008, the mini-me lives on, just drove/drifted it a couple of nights ago :D: (Those are HPI wheels licensed by Work on it, I painted the centers to match lol)

How much did everyone pay for the cr kai because the best price I have got so far is $1399 shipped

So now after looking for awhile im not sure if I want to do the whole whip in 18x9.5. I am maybe thinking about doing a 18x8.5 in the front for anyone who has done this are the any positives or negatives. Because I know you have to have a 9.5 to get the concave look. I think i might like the flat front in the front and a concave in the back.