comebackqid

iTrader: (13)

ONI CAMBER how does this even drive!?

Did you get your rears rolled/pulled?

dlum125

iTrader: (7)

won't be able to get a hold of them for another two weeks, but it's pretty simple. break off the tab, then drill a hole on the back side of it towards the front. just big enough to fit a zip tie. then zip tie it to the bumper! i don't think there is a way to keep the side markers functional though. the light won't fit

Munchy

iTrader: (2)

The thing is that my wheels don't hit the tab, they literally hit the very back point of the lights.

WreakLoosE

Hummm... I see what you are saying.. I think there is a way to keep it functional.. May need to drill 2 holes for the zip tie to keep the hole for the light free.. Im just seeing this in my head right now.. Would need to look at it in real life.

I like this idea and all in all......

NOT BAD!!

ooobigfire

iTrader: (2)

Same here. I have mine ziptied but the tires still it the very tip of the lense itself.

Munchy

iTrader: (2)

I could grind down the tip but that would make a hole in the lights causing condensation/water to enter...

ooobigfire

iTrader: (2)

Yea I'd rather go without them than do that

WreakLoosE

Or this!!! if you have a set of side markers you don't care about. You can dremel out the back part of the reflector housing but keep the reflector part in place to make it look normal..

ooobigfire

iTrader: (2)

I have already cut most of the back out of my spare markers(I still have stock untouched markers) but its the lense that is hitting. Not the back.

dlum125

iTrader: (7)

oh all of you guys are lucky than. i think mine hit the lights hahah. but hmm. if you drill out two holes towards the front, you can use those holes to run a zip tie through, BUT that would still cause water to come in. i don't think there is a way to keep them in + functional if you're using a zip tie because holes must be drilled which means water. and water + light bulbs = no no

Atilla

iTrader: (1)

^lol - you still have light bulbs in your sides?? pfft...n00b. jk jk

no but srsly, i got rid of the bulbs a while ago after i destroyed my old set...my sides are just there for appearance.

Munchy

iTrader: (2)

Finally fixed my wheel banging problem... Pulled the rear fenders a bit more and problem solved!

But my fronts still catch on something when going all the way left or right. Turns out it's the actual inner frame of the car lol

I guess nature will run its course and grind it down by itself.

WreakLoosE

pictures please!

comebackqid

iTrader: (13)

damn munchy thats scary sounding! well if all is gd post some pics of da whip!

Munchy

iTrader: (2)

Pics by Saturday... Gonna the wash the car for the first time since last year lol

Season opener BBQ for my crew Saturday as well, I'm pretty sure someone will come with an SLR (which > my iPhone)

Zinitiate

I would recommend cutting or bending that. I think your tires will get ground out before your frame does.

Anyways, here's some pics of what I did. Got rid of all my scrubbing issues. Although I would suggest using something other than a steel mallet. So ghetto...




Also, I took a pic of my front markers to show where I dremeled, and where there is still rubbing.




Hope that helps.

ooobigfire

iTrader: (2)

Mine does that too. Its only really a pain when I'm backing into a parking spot. At full lock it will hit the frame and makes me stall the car cause it won't move lol. I've gotten use to it now but it was embarrassing at first.

Munchy

iTrader: (2)

@Zinitiate: My front wheels don't rub there, it's actually to the left of that in the wheel well.

I'll take a look at my sidemarkers over the next week, thanks for the pics!

9krpmrx8

iTrader: (46)

As low as I can go and still hit the canyons hard Oh, and you will notice neither car has banged up bodywork or zip ties (except the ones holding on vacuum lines )

http://www.flickr.com/photos/9krpmrx8/7219779738/http://www.flickr.com/photos/9krpmrx8/7219774828/http://www.flickr.com/photos/9krpmrx8/7219772560/http://www.flickr.com/photos/9krpmrx8/7219769394/http://www.flickr.com/photos/9krpmrx8/7219766816/


And Hoss-05's ride

http://www.flickr.com/photos/9krpmrx8/7219778844/http://www.flickr.com/photos/9krpmrx8/7219764008/

mistahjg

we need more aggressive wheel set ups, now it seems like everyones playin around with un aggressive wheel like fitments lol... cmon guys lets see some tilt on there

9krpmrx8

iTrader: (46)

For realz yo, Hoss-05 and I wuz talkin' bout gettin' sumz XXR's in an aggressive fitments so we could be stanced yo.

hoss -05

iTrader: (4)

XXR's... shiz man I'm gonna rock some rota's.

pdxhak

iTrader: (2)

You guys need to get with it and run Vork Ravs like me

Grace_Excel

iTrader: (5)

Bwahahaha! What third-world Asian country did that come from?

9krpmrx8

iTrader: (46)

that is awesome.