Aggressive Wheel Fitment Thread
#7351
I am THAT guy
iTrader: (1)
Okay so I couldn't sale my 527 (hyper silver 18x9.75 +20) so I'm powder coating them white :-/ to go on my BB beauty will post pics as soon as they are done! (dropped them off yesterday!)
Zumn when is your car going to be done anyways? there is a meet in late March, early April!
Zumn when is your car going to be done anyways? there is a meet in late March, early April!
lame
#7356
looking for some help I am running XXR 527 17x9.75 +25 i need an alaingment done. I am on k sport kontrol pros, I am looking for some toe and camber specs. How much neg camber should I be looking at? I was told to run a little toe out in the front. I have mostly been street driving these days so I need to keep tire wear in mind any help and suggestions would be appricated.
#7357
I ♥ Drifting!!!
iTrader: (6)
Yea **** must sound tribal, if I went back in time, I want to do something like that, except single sided. HKS single + race pipe was too quiet. Might get another 8 soon :donno
IDK man I dont like this car. The color combo I'm not feeling. I don't think a deep PINK colored car is cool. Especially with bright yellow rims, and a huge ugly wing. Blacked out tail lights are so 2011. fitment and stance are cool, but the car in general is a FAIL!
#7358
Registered
iTrader: (13)
looking for some help I am running XXR 527 17x9.75 +25 i need an alaingment done. I am on k sport kontrol pros, I am looking for some toe and camber specs. How much neg camber should I be looking at? I was told to run a little toe out in the front. I have mostly been street driving these days so I need to keep tire wear in mind any help and suggestions would be appricated.
#7363
just a stupid will it fit question (yes im posting it here)
If I'm currently running 18x10.5 +15 on 245/40s and i want more poke, if i go with 18x11 +10 on 245/40s that should fit too, just with more poke right? Same inset calculated...
Same goes with a smaller width, I'd go like 18x10 +5 on 245s right?
Just trying to gather my understanding of an offset calculator.
If I'm currently running 18x10.5 +15 on 245/40s and i want more poke, if i go with 18x11 +10 on 245/40s that should fit too, just with more poke right? Same inset calculated...
Same goes with a smaller width, I'd go like 18x10 +5 on 245s right?
Just trying to gather my understanding of an offset calculator.
#7364
SARX Legend
iTrader: (46)
[ATTACH]Attachment 181248[/ATTACH]
bout to be agressive, by friday wheels should be on,
and still deciding if fenders should need a roll,
bout to be agressive, by friday wheels should be on,
and still deciding if fenders should need a roll,
I hate those rims, keep the R3 wheels.
#7366
Registered
iTrader: (2)
Join Date: May 2010
Location: Barksdale AFB, LA
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
I like my 522s...
And apparently so does Kyle
Do what you want man. Sure they are cheap wheels, but maybe you don't wanna jack up those sweet r3 wheels. I realize there is a risk with running cheap wheels if they bend or bust I can still get 2 more sets before I would even come close to the price buying authentic wheels in the first place.
And apparently so does Kyle
Do what you want man. Sure they are cheap wheels, but maybe you don't wanna jack up those sweet r3 wheels. I realize there is a risk with running cheap wheels if they bend or bust I can still get 2 more sets before I would even come close to the price buying authentic wheels in the first place.
#7370
SARX Legend
iTrader: (46)
Looks are subjective I know (look at my old Volks) but I don't like how the face of the wheels pokes out either. If I could do it all over I would have had my GT-F's rebuilt to 18 x 10 +35's.
#7375
OMGITM!
Thread Starter
iTrader: (15)
Join Date: Jan 2006
Location: Sunny Southern California
Posts: 3,513
Likes: 0
Received 6 Likes
on
6 Posts
just a stupid will it fit question (yes im posting it here)
If I'm currently running 18x10.5 +15 on 245/40s and i want more poke, if i go with 18x11 +10 on 245/40s that should fit too, just with more poke right? Same inset calculated...
Same goes with a smaller width, I'd go like 18x10 +5 on 245s right?
Just trying to gather my understanding of an offset calculator.
If I'm currently running 18x10.5 +15 on 245/40s and i want more poke, if i go with 18x11 +10 on 245/40s that should fit too, just with more poke right? Same inset calculated...
Same goes with a smaller width, I'd go like 18x10 +5 on 245s right?
Just trying to gather my understanding of an offset calculator.
As long as you stay with the inner equivalent of 11 +25 you shouldn't have inner clearance issues. Outer clearance will differ from car to car, so you'll have to be the judge/compare with your current 10.5 ET15.
Also, if you aren't already, use this calculator for easy translation. I hate the miata one, haha. http://www.1010tires.com/WheelOffsetCalculator.asp