Discussion of Technical Service Bulletins (TSBs) for RX-8
#327
Registered User
Join Date: May 2005
Location: The City
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
TSBs not available at Finishline?
I have tried to access http://www.finishlineperformance.com/rx8/bulletins.html but it no longer works (?) Has anyone else tried recently to connect to Finishline's TSB documents?
#331
RX-Heaven
iTrader: (6)
if i take my RX-8 to the dealer with the printed tsb's in hand are they supposed to fix the applicable problems nder warranty if my VIN is within range and they can duplicate the problem?
#332
I have two issues
1) I have the steering wheel rattle coming from the airbag compartment
2) I have the dash light on that has something to do with headlights not working properly. I think it has something to do with the auto-adjustment/calibration motor not working properly.
I have an '04. If I took it to the Mazda dealership, would they do these fixes for me for free?
1) I have the steering wheel rattle coming from the airbag compartment
2) I have the dash light on that has something to do with headlights not working properly. I think it has something to do with the auto-adjustment/calibration motor not working properly.
I have an '04. If I took it to the Mazda dealership, would they do these fixes for me for free?
#333
05 RX8 Sold///05 Evo VIII
iTrader: (5)
Join Date: Feb 2009
Location: New Berlin, WI
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
I have two issues
1) I have the steering wheel rattle coming from the airbag compartment
2) I have the dash light on that has something to do with headlights not working properly. I think it has something to do with the auto-adjustment/calibration motor not working properly.
I have an '04. If I took it to the Mazda dealership, would they do these fixes for me for free?
1) I have the steering wheel rattle coming from the airbag compartment
2) I have the dash light on that has something to do with headlights not working properly. I think it has something to do with the auto-adjustment/calibration motor not working properly.
I have an '04. If I took it to the Mazda dealership, would they do these fixes for me for free?
The light on the dash is the rear height sensor malfunction. If you take your sensor apart and find the springs are badly corroded - PM me. I have a collection of the correct springs designed for the sensor.
You need to clean the area thoroughly and replace the springs.
If your sensor is screwed beyond all repair i MAY be able to get my hands on a nice replacement one.
You are likely out of warranty, don't expect too much help from the dealership!
#334
SARX Legend
iTrader: (46)
www.finishlineperformance.com is gone apparently.
New Link:
http://parts.arlingtonmazda.com/pages/RX8.html
Although some that I recall are missing now.
New Link:
http://parts.arlingtonmazda.com/pages/RX8.html
Although some that I recall are missing now.
Last edited by 9krpmrx8; 10-13-2011 at 11:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
gwailo
New Member Forum
30
06-07-2020 12:21 PM
Touge
Canada Forum
3
09-10-2015 08:07 AM